Question about Office Equipment & Supplies
Have you installed the latest drivers for your new printer? Also make sure that you have uninstalled the previous printer's driver using the "Add/Remove Software" in Control Panel.
Once you have done this, make sure all cables are secure between printer and computer. Next make this as your default printer. Procedure as follows..
In Control Panel, go to printers and faxes. you should see your printer here. Just right click and choose "set as default printer". Sometimes your driver software will ask this during installation itself. You should be OK now...
Should you have any further questions, please feel free to post them here. Please do not assign a rating until you feel your problem is resolved. I will try my best to help you further if need be.
If you are satisfied with my solution or have no other questions, please close the problem by assigning a FIXYA rating for my solution. I would be very grateful for your show of appreciation.
Thank you for using FIXYA!
Posted on Apr 19, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 24, 2011 | Brother DCP-135C Flatbed Digital MFC...
Jan 04, 2010 | Brother DCP-135C Flatbed Digital MFC...
Aug 26, 2009 | Brother DCP-135C Flatbed Digital MFC...
Jan 17, 2009 | Brother DCP 130C All-In-One InkJet Printer
Jan 13, 2009 | Brother DCP 130C All-In-One InkJet Printer
47 people viewed this question
Usually answered in minutes!