Connecting JVC television set model AV29LX2 / JVC home theatre system/satellite decoder / Sony DVD recorder
Hi, I bought the TV and home theatre system (RX5022V) 5 years ago and the Sony DVD recorder model RDRHX750 last year. I cannot get the DVD recorder to record. I can watch DVD's. The recorder's manual only shows how to connect to terrestrial aerial cable but it won't work since the satellite dish has one plug which has to go into the set top box decoder. I want to record TV programs. Please help!
Thanks very much
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try this steps
On the backside of your satellite receiver, you will notice a bunch of connections. If you already have your coaxial satellite cable connected to the INPUT on the receiver, leave it connected.Disconnect and remove the cable connecting the receiver to the television. Grab your A/V composite wires and insert them into the Audio/Video OUTPUTS on the back of the satellite receiver. These are color-coded connections--red to red, white to white and yellow to yellow. The red and white connections are your audio feeds and the yellow is for your video. Look on the backside of your DVD/VCR dual recorder. You will see similar connections. Connect the other end of the composite wires to the Audio/Video INPUTS on the DVD/VCR dual recorder. With a second set of A/V composite wires, connect one end to the DVD/VCR dual recorder's A/V OUTPUT and the other end to the television's A/V INPUT. Again, be sure to follow the color code. Also, if your television has more than one available input, be sure to know to which one you made the connections (A/V 1, A/V 2, etc.)
Next, tune your television to the proper input channel. Look on the television's remote control for a button that is labeled "Inputs" or "A/V." Press it until you see the correct A/V channel appear on the screen. If you made your connections in A/V 1, then the TV should display "A/V 1" in the corner . Now, just turn your equipment on and settle back to watch your favorite show or DVD
you have two choices. a newer connection you must have on both devices is a optical connection. if you have this buy a digital optic cable.
if you dont have this connection. look for a red and white connection on both devices this is just a simple audio lead .
To recieve the sound through the speakers after you have installed the leads make sure the home cinema function is set to "tv"
There is sound coming from the tv speakers though? I had the same problem with my top of the line 7 channel surround sound theatre system. Its not that there is anything wrong with the sound system but that you may need to plug the Audio cord into the external device IE: cable box. Mine works strictly for the dvd function of my system because of this.
Hi. No they won't work. Different systems here (found out the hard way). Ironically we are now moving back to Australia from New Jersey and we have nearly the exact same system that we have to sell before coming back !
Anyways here are the detailed instructions for connecting a DVD recorder to a TV
The first step to connecting a DVD Recorder to your TV is to
determine what type of connection you want to make between the TV
source (Cable, Satellite, Antenna), the DVD Recorder and the TV. This
is usually determined by the outputs and inputs available on the DVD
Recorder and the TV.
If you have an older TV that only accepts
RF (Coaxial) input, then you would connect the RF output (a coaxial
cable) from your TV source (in my case a Cable Box) to the RF input on
the DVD Recorder. Then connect the RF output from the DVD Recorder to
the RF input on the TV. This is the most basic (and lowest quality)
option for connecting a DVD Recorder to any TV.
If you want to
use higher quality cables, then you may want to connect the TV Source
(Cable and Satellite only, not Antenna) to the DVD Recorder using
Composite, S-Video or Component video and audio cables.
composite cables (also known as RCA, the yellow plug is video, the red
and white plugs, audio): Plug in the composite cables to the RCA
outputs on the back of your TV source and then plug in the composite
cables to the RCA inputs of the DVD Recorder. Then connect the RCA
outputs from the DVD Recorder to RCA inputs on the TV.
S-Video and RCA audio cables: Plug in the S-Video cable to the S-Video
output of the TV source. Plug in the S-Video cable to the S-Video input
on the DVD Recorder. Next, connect the RCA audio cable to the output on
the TV source and the input on the DVD Recorder. Finally, connect the
S-Video cable and the RCA audio cable to the output on the DVD Recorder
and the input on the TV.
To use Component Video cables and RCA
audio cables: Connect the Component Video cable and the red and white
RCA audio cables to the outputs on the TV source and the inputs on the
DVD Recorder. Next, connect the Component Video cable and RCA audio
cable to the outputs on the DVD Recorder and the inputs on the TV.
that the TV source (either Cable, Satellite or Antenna), the DVD
Recorder and the TV are all connected, you need to configure everything
to make sure that TV is coming through the DVD Recorder, for recording
Turn on the Cable Box or Satellite Receiver, TV and DVD Recorder.
you connected everything using the RF connections then the TV should be
passing through the DVD Recorder and displaying Television on the TV
screen. To record in this mode, you would need to tune to either
channel 3 or 4 on the TV and then use the DVD Recorder TV Tuner to
change channels and record.
If you made connections using
either Composite, S-Video or Component cables, then to view or record
TV, two adjustments need to be made. First, the DVD Recorder needs to
be tuned to the appropriate input, typically L1 or L3 for rear inputs
and L2 for front inputs. Second, the TV also must be tuned to the
proper input, on a TV usually Video 1 or Video 2.
If you have a
Dolby Digital 5.1 Surround Sound A/V Receiver you can connect either a
Digital Optical Audio cable or Coaxial Digital Audio cable from the DVD
Recorder to the receiver to listen to audio through the receiver.
If you can not turn on TV set with the power button on the TV its not a standby problem as this would by pass the standby. Theres most likly, on a set of this age, top have a poiwer regulator problem and is going to need a trained tech to assist you in this repair.