Question about Nintendo Wii Console

1 Answer

Wii remote everytime i push any button my 4 blue lights flash but nothing happens. the screen does not respond to any button, changed batteries no effect

Posted by on

  • Anonymous Dec 26, 2008

    even when i change the batteries the lights flash and nothing happens on the screen

  • wolfie2008 Dec 26, 2008

    Have 4 new remotes, 2 came w/wii console, the other 2 purchased separately. Went through the sync process and no go. 1 remote works at this point - that's it. Not sure what the problem is, but sometimes I don't even get the blue lights. I've tried my rechargable batteries and regular batteries and either works. Also purchased a 4 port recharge unit, it doesn't charge the remotes either. Its supposed to glow red lights at each port to show its charging and once the light goes out, its supposed to be charged. The red lights don't illuminate consistently and I don't think the charge is taking place at all, but hard to tell, since I've got 1 out of 4 remotes working. Pretty much at my wits end on this.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 216 Answers

Greetings baggie bird,

You need to resynch your remote to your Wii console.

You hit the sync button under the battery cover on the remote, and then when the lights are flashing on the remote, you hit the sync button on the Wii. The synch button is located under the small cover to the left of the cd/dvd slot.

Thank you,

Dort
Go Ahead. Use Us.

Posted on Apr 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remotes do not work---no arrow comes up on the screen--the blue lights on the bottom


Hello, sounds like you might just need to sync them to the console again. Even if you did nothing, they randomly lose sync now and then. Even some updates cause them to lose sync with the Wii. All you have to do is
: 1) Hold down the sync button on the Wii console for 15 seconds or so. This completely resets the sync on all remotes. 2) Sync the remote again by pushing the sync button on the inside of the battery cover while the Wii is on, then pushing the sync button on the console again.
I hope this helps! :D

Nov 29, 2011 | Nintendo Wii Console

4 Answers

Cant get pass the "press A button" screen


Turn off for a moment, try again, reconnect your controller.

Since its brand new, you can get it replaced if that doesn't work, dont waste your energy on it, just get another one, free replacement / warraty. Im sure.

Sep 05, 2008 | Nintendo Wii Console

1 Answer

I can't connect my controller to the wii console. Model number Rvl-001(USA). Model of nyko pistol accessory is Bn:090907 4632.My mom threw out the manual out by mistake.HELP!


  • Turn on your Wii console. While on the HOME screen, press any button on the Wii Remote.
  • If the 4 squares on the bottom remain dark, change the batteries (or for a rechargeable Wii Remote, place it on the charger for a while).
  • If the 4 squares blink blue, then stop, your Wii Remote is not synced. Press the 1 and 2 buttons at the same time. This should connect your Wii Remote if it's been synced before.
  • If your 4 squares still blink blue, then stop, these last steps will do the trick. First, on the front of the Wii console, just underneath the disc slot, there is a small panel that opens down. Open it and press the small red button.
  • Open the battery panel of your Wii Remote and press the small red button. Replace the battery panel and observe the blinking blue lights. If 3 stop blinking, and 1 remains lit blue, your Wii Remote is synced with your console.

May 13, 2011 | Video Game Consoles & Games

1 Answer

How do i resync my wii controler


follow the steps descrived below:
1.Turn on your Wii console. While on the HOME screen, press any button on the Wii Remote. If the 4 squares on the bottom remain dark, change the batteries (or for a rechargeable Wii Remote, place it on the charger for a while).
2.If the 4 squares blink blue, then stop, your Wii Remote is not synced. Press the 1 and 2 buttons at the same time. This should connect your Wii Remote if it's been synced before. 
3.If your 4 squares still blink blue, then stop, these last steps will do the trick. First, on the front of the Wii console, just underneath the disc slot, there is a small panel that opens down. Open it and press the small red button. 
4.Open the battery panel of your Wii Remote and press the small red button. Replace the battery panel and observe the blinking blue lights. If 3 stop blinking, and 1 remains lit blue, your Wii Remote is synced with your console.

Mar 03, 2010 | Nintendo Wii Console

1 Answer

When I turn on WII it says ''press A to continue''ut nothing happens. I have changed the batteries in the remotes but they do not respond. I have checked the sensor is plugged in.


If you have more than one remote, you may have to "sync" the remotes to your Wii system.
1. Open the battery cover on your remote and press the red "SYNC" button. The lights on the remote should begin flashing.
2. Open the cover on SD Card slot on the console and press the "SYNC" button.
3. The lights on the remote should stop flashing after a few seconds. Your remote is now ready for use.
This process must be repeated for each new remote.

Feb 09, 2010 | Nintendo Wii Console

2 Answers

Remotes can't be found


When you change the batteries for a Wii Remote (in my experience) you have to re-sync (reconnect) them to the Wii console. To do this, there is a button on the Wii Remote by the batteries that either says sync or will show curved bars on I think i red button. This same button should be located on the Wii console. You have to push the sync button on the Wii then on the remote to sync them together. This should solve your connection problem.

Apr 29, 2009 | Nintendo Wii Console

1 Answer

New remote for WII


you need to sync it with the console

Apr 13, 2009 | Nintendo Wii Console

1 Answer

New wii remote


Maybee you shou hold the red button?

Nov 08, 2008 | Nintendo Wii Console

1 Answer

Remote


The problem where the lights would flash on and then go off happened to me also.

I pressed the 'sync' button on the wii remote and the red 'sync' button on the console at the same time for about 10 seconds. Let go of the buttons and then the lights should flash and light 1 on the remote came up!!!

Hope it works for all 'ya!

andy

Jun 06, 2008 | Nintendo Wii Console

Not finding what you are looking for?
Nintendo Wii Console Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Raj Patel

Level 3 Expert

847 Answers

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...