Question about Fisher and Paykel (IWL12)

1 Answer

My washer will not complete spin cycle. Code error 37. Is there anything I can do to fix it without a repairman?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Fisher and P... Master
  • 713 Answers

Hi just read your posting.Error code 37 means you have a Pump Block Error.Now does the machine drain the water?Does your machine drain the water into the laundry sink or somewhere else?Please look underneath the machine to the front right and you should see a red or black fan.If you see this fan this is your pump.Try turning the fan clockwise and anticlockwise a few times to maybe loosen the pump if it is jammed.The fan should turn freely.Once you have turned the fan put it back on its feet and try a spin cycle.Hopefully it starts to drain.If you cant see a fan or the machine still does not drain then reply back with additional information and I am sure I can help you rectify this fault.Looking forward to your reply.

Posted on Jul 10, 2010

  • ciccaroo Aug 22, 2010

    I'm also getting a code 37. The rinse cycle completes, tub drains, then goes through 9 minutes on spin cycle without lid locking or tub spinning. At the end of 9 minutes, machine beeps a code 37.
    Thanks for any suggestions.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F&P GWL11 Washer Stops at rinse - Error Code 37


I hate to say it but it sounds like the controller. I used to have one that had a similar problem that was fixed with a diverter and a controller. Another year or two later it was doing the same thing, so we just replaced it. Just a warning.

Jul 08, 2012 | Fisher and Paykel Washing Machines

1 Answer

It seems like my 1st problem may have been water spilling out during the spin cycle but that could have been a sump pump or draining spout problem. Next my problem became the spin cycle would not start. ...


Hi just read your posting.Error code 37 is called PUMP BLOCK ERROR.Which hose did you disconnect?Is your machine draining the water?Please reply with additional information and I am sure I can help you further.Looking forward to your reply.

Sep 16, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

What does a code f51 stand for on a kenmore oasis elite washer


F-51 ERROR CODE IS DEALING WITH THE SPIN CYCLE. THE CONTROL DOES NOT DETECT IT SPINNING.THE RPS SENSOR ON THE BOTTOM OF THE UNIT NEEDS TO BE TAKEN OFF AND PUT BACK ON ABOUT 10 TIMES. SOUNDS WEIRD BUT USUALLY FIXES IT. THEY DO HAVE A KIT ALSO FOR THE RPS TO BE REPLACED. UNPLUGGING FOR A FEW HOURS IS A TEMP FIX.

Jul 17, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Kenmore Oasis HE 27082 Displays "LD" error falsely


Hello,

Since that you let repairman do twice and didn't fixed the problem, I think your washer have still warranty from the vendor. and they repair it free.

Please verify the panel board of the machine maybe got grounded in the wiring or got wet. How ever you can do that in your own you should consult the repairman on that matter. however the two repairman did not resolve, so its better to bring the washer's to the vendor. im sure they can fix the issue or you will be enlightened by their valuable suggestion and solution.

may this help

melnavz

Oct 18, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Error code 30?


It means the drum is overfilled with water. . Select the drain and spin cycle to empty the washer. Then start over. If this doesn't work, you will need a repairman.

Jul 28, 2008 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Whirpool


I would say to worry about it , if its flooding your house , need to open washer front panel ,start a new wash cycle and take a look to see where the water is leaking from , sounds like a broken hose under the tub that connects to the DRAIN MOTOR PUMP , AND BETTER have it fix right away cause if its getting to the main motor it could damage it , hope it helps AJ

May 19, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...