Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

F&P GW512 compact wont spin

Hi, i have a F&P GW512 compact and it has stopped before the spin cycle and wont continue through.
the first time this happened it beeped at quick intervills and there were three (i think) random lights on on the wash progress bar when normally there would only be lights for the remaining cycles.
I have tried to run the whole cycle through again but still same problem.
Any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Fisher and P... Master
  • 713 Answers

Hi just read your posting.Does your machine drain the water out?Starting from left to right what lights were lit on the progress bar when it started to beep?Was it the 2nd and 5th or 3rd and 7th---etc---?Please reply with additional information on the questions and I am sure I can help you rectify this fault.

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The heater runs constantly, the thermostat seems to work, I check continuity through it, it opens and closes. What else could cause not to shut off?


QMark MUH (0521) Compact Heater Wont shut off ... - Fixya

www.fixya.com > ... > QMark > QMark MUH (0521) Compact Heater
QMark MUH (0521) Compact Heater, wont shut off related issues. Get free help, solutions & advice from top QMark experts.

QMark MUH (0521) Compact... Repair Questions - Fixya

www.fixya.com/support/p437492-qmark_muh_0521_compact_heater
Recent QMark MUH (0521) Compact Heater questions, problems & answers. ...thermostat on and contactor makes buzzing noise, fan dont run but its not seized it willfreewheel when you spin it ... How do I turn off my q mark wall heater there.

QMark MUH (0521) Compact Heater Shut - Questions - Fixya


Dec 01, 2015 | QMark MUH (0521) Compact Heater

1 Answer

It was on the last cycle spin it stopped had pumped the water out but stopped spinning.


Expert Tips, Troubleshooting & FAQs - Fisher & Paykel ...

https://www.fisherpaykel.com/us/support/expert-tips/Fisher & PaykelFind Tips, Troubleshooting Information, How-tos, FAQs and Answers to Commonly Asked Questions about Fisher & Paykel Appliances.
also on Youtube

Aug 17, 2015 | Fisher and Paykel Washing Machines

1 Answer

Machine worked fine to start with . Then stopped. Will fill water but drum wont turn on a wash cycle. And wont spin on spin cycle.But Belt seems fine. Can you help.


The pump needs to be replaced. The pump controls the agitation for the wash cycle, also controls the tub for draining & spinning after the wash & rinse cycle. The belt has nothing to do with it. Pump is very simple to remove & replace, and not too expensive, it's plastic.

Jun 03, 2015 | Washing Machines

1 Answer

HOW fix myadmiral washer model AED4475tq0


check the clutch may be slipping and for good measure check the door switch with multi meter for continuity

Jan 14, 2015 | Admiral Washing Machines

1 Answer

Washer repeats entire cycle - does not stop at end of spin cycle.


It is possible that presence of moisture within the START button can trigger the cycle to continue as it keep the processor to continue the wash cycle,Hence you must remove the panel and board after disconnecting the wiring harness and use a hair dryer to warm off any presence of moisture on the panel and board. Do it with time to ensure there is no moisture within the panel.
I think this must solve the issue. Repeat the work many times as sometimes moisture and dirt together might form a conductive bond to trigger as a pressed on switch. If possible open panel to clean switch pad.

Jan 23, 2013 | Kenmore 2.1 cu. ft. Compact Portable...

1 Answer

Fisher and Paykel GW512 wont complete spin step.


This the lid lock device
If lid is open circuit, one of the wires have came off the plug.
c9b7128c-9518-4f86-93dd-311ac6e4b443.jpg

Jul 19, 2012 | Fisher and Paykel Washing Machines

1 Answer

Compact Kenmore top loadwasher does not spin


Clutch is failed. replace it.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 29, 2009 | Kenmore Washing Machines

1 Answer

WD 8030 W Front Loader


the load is off balace you may need to add more clothes or stop the machine and wring the water out and try to spin again( i also have an LG and mine wont spin if ther is only one item in it

Feb 13, 2008 | LG WM1812C Front Load Washer

1 Answer

Fisher & Paykel GW703 wont stop!


It sounds like your machine has been programmed to automatically run through the various cycles continuously. Most likely in error.

Oct 07, 2007 | Washing Machines

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...