Question about Audio & Video Receivers

1 Answer

The unit is HTS3357 .The remote control cannot switch the unit on,only off.This is a brand new device and otherwise works well . It can be switched on by pressing one or another of the controls ,i.e. tv ,radio etc. but the on/off switch is inoperative except to switch off. In spite of the newness of the unit I have put fresh batteries in the remote and also tried removing all external connections (except for mains) and the old trick of unplugging the mains for half an hour or so all of which attempts have proved unsuccessful

Posted by on

  • nico3nico Nov 17, 2008

    I cannot switch on or off with the remote anymore. Other functions still work.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 319 Answers

Defective remote

Posted on Apr 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The remote controller has spoilt. May I know where can I buy a new one in Singapore ?


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Apr 16, 2016 | Onkyo TX-NR509 AV Receiver

2 Answers

Remote rc 1030


it must be your remote has been broken (just like my remote on tv) better to buy a new remote or buy a universal remote control.

thank you for using fixya
CHARCOIS

Oct 31, 2008 | Denon AVR-2807 Receiver

2 Answers

I need a remote control for model ST-X301L


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

Aug 09, 2015 | Audio & Video Receivers

1 Answer

How do I setup jvc rx-d202 with out remote


Without a remote control, you can't. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

Nov 13, 2014 | JVC RX-D202 Receiver

1 Answer

TX light on remote control constantly blinking and display on set reverts to tape 1 all the time...please help...thank you...:)


Duh, the remote has a hot switch and it's always transmitting something. Blind it, hide it, pull the batteries before it kills them.

Try this advice:
http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12954406270641
"Dead" Remotes Can Be Saved
How to Re-Start Your "Dead" Remote Control
This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. Good Luck!
-----------------------------
Step 1- Pull the batteries out of the remote and leave them out until Step 4.
Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!
Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.
(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)
Step 4- Put the batteries back into the remote, being very careful to install them correctly. New batteries should be used if you're not sure about the old ones.
Step 5- Try the remote.
Special Note:
If you have a digital camera, camcorder or camera phone you can test the remote to see if it is emitting a signal. Face the remote towards the lens of the digital unit until you can see the front of the remote. Depress any button on the remote. You should see a light (steady, blink or flashing) being emitted from the remote. If you do then the problem might not be the remote but the sensor on the unit.
If it works, Great!
If not, it's time to call 1-800-Remotes or use this website to order a new remote.
Find new or replacement remotes:
http://remotes.com/store/codes_original.html
or eBay: search for "(model) remotes", check the 'include description' box. Usually cheaper than the vendors.

May 14, 2011 | Marantz SR-5000

1 Answer

Remote control does not work


Try this advice:
http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12954406270641
"Dead" Remotes Can Be Saved
How to Re-Start Your "Dead" Remote Control
This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. Good Luck!
-----------------------------
Step 1- Pull the batteries out of the remote and leave them out until Step 4.
Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!
Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.
(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)
Step 4- Put the batteries back into the remote, being very careful to install them correctly.
New batteries should be used if you're not sure about the old ones.
Step 5- Try the remote.
Special Note:
If you have a digital camera, camcorder or camera phone you can test the remote to see if it is emitting a signal. Face the remote towards the lens of the digital unit until you can see the front of the remote. Depress any button on the remote. You should see a light (steady, blink or flashing) being emitted from the remote. If you do then the problem might not be the remote but the sensor on the unit.
If it works, Great!
If not, it's time to call 1-800-Remotes or use this website to order a new remote.
Find new or replacement remotes:
http://remotes.com/store/codes_original.html
or eBay: search for "(model) remotes", check the 'include description' box. Usually cheaper than the vendors.

Apr 23, 2011 | Kenwood Audio & Video Receivers

1 Answer

Sony STR-DE697. Remote will not communicate with amp, has new batterys, amp is fine otherwise


Make sure the receiver's remote 'eye' is not exposed to high infrared energy from other sources, like the sun.

Try this advice:


http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12954406270641


"Dead" Remotes Can Be Saved

How to Re-Start Your "Dead" Remote Control

This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. Good Luck!

-----------------------------

Step 1- Pull the batteries out of the remote and leave them out until Step 4.


Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!


Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.


(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)


Step 4- Put the batteries back into the remote, being very careful to install them correctly.

New batteries should be used if you're not sure about the old ones.


Step 5- Try the remote.


Special Note:


If you have a digital camera, camcorder or camera phone you can test the remote to see if it is emitting a signal. Face the remote towards the lens of the digital unit until you can see the front of the remote. Depress any button on the remote. You should see a light (steady, blink or flashing) being emitted from the remote. If you do then the problem might not be the remote but the sensor on the unit.


If it works, Great!

If not, it's time to call 1-800-Remotes or use this website to order a new remote.


Find new or replacement remotes:


http://remotes.com/store/codes_original.html


or eBay: search for "(model) remotes", check the 'include description

Apr 06, 2011 | Sony STR-DE697 Receiver

1 Answer

The remote will not work replaced batt. with new ones clear line to sensor


Try this advice:


http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12954406270641


"Dead" Remotes Can Be Saved

How to Re-Start Your "Dead" Remote Control

This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. Good Luck!

-----------------------------

Step 1- Pull the batteries out of the remote and leave them out until Step 4.


Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!


Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.


(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)


Step 4- Put the batteries back into the remote, being very careful to install them correctly.

New batteries should be used if you're not sure about the old ones.


Step 5- Try the remote.


Special Note:


If you have a digital camera, camcorder or camera phone you can test the remote to see if it is emitting a signal. Face the remote towards the lens of the digital unit until you can see the front of the remote. Depress any button on the remote. You should see a light (steady, blink or flashing) being emitted from the remote. If you do then the problem might not be the remote but the sensor on the unit.


If it works, Great!

If not, it's time to call 1-800-Remotes or use this website to order a new remote.


Find new or replacement remotes:


http://remotes.com/store/codes_original.html


or eBay: search for "(model) remotes", check the 'include description

Apr 01, 2011 | Toshiba Audio & Video Receivers

1 Answer

Remote not working. tried the tin foil idea w/o success. can you repair or tell me where to replace it?


Try this advice:


http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12954406270641


"Dead" Remotes Can Be Saved

How to Re-Start Your "Dead" Remote Control

This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. Good Luck!

-----------------------------

Step 1- Pull the batteries out of the remote and leave them out until Step 4.


Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!


Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.


(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)


Step 4- Put the batteries back into the remote, being very careful to install them correctly.

New batteries should be used if you're not sure about the old ones.


Step 5- Try the remote.


Special Note:


If you have a digital camera, camcorder or camera phone you can test the remote to see if it is emitting a signal. Face the remote towards the lens of the digital unit until you can see the front of the remote. Depress any button on the remote. You should see a light (steady, blink or flashing) being emitted from the remote. If you do then the problem might not be the remote but the sensor on the unit.


If it works, Great!

If not, it's time to call 1-800-Remotes or use this website to order a new remote.


Find new or replacement remotes:


http://remotes.com/store/codes_original.html


or eBay: search for "(model) remotes", check the 'include description

Mar 28, 2011 | Audio & Video Receivers

1 Answer

Hi, I have a Pioneer XV-DV77 DVD/CD Tuner. My tuner does not work most of the time but occasionally it does after pressing different buttons on the remote control. Sometimes it works if I switch off...


I'd advise eliminating any intervening hardware until you resolve the problem.

What exactly isn't working that also goes through a VCR to a TV? How is it all connected, specifically?

"Different buttons". Can you be more specific? Perhaps you just have a remote control issue.

See this link:
http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12963989782821

"Dead" Remotes Can Be Saved How to Re-Start Your "Dead" Remote Control This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. Good Luck!
Step 1- Pull the batteries out of the remote and leave them out until Step 4.
Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!
Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.
(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)
Step 4- Put the batteries back into the remote, being very careful to install them correctly.
New batteries should be used if you're not sure about the old ones.
Step 5- Try the remote.
Special Note:
If you have a digital camera, camcorder or camera phone you can test the remote to see if it is emitting a signal. Face the remote towards the lens of the digital unit until you can see the front of the remote. Depress any button on the remote. You should see a light (steady, blink or flashing) being emitted from the remote. If you do then the problem might not be the remote but the sensor on the unit.

If it works, Great!
If not, it's time to call 1-800-Remotes or use this website to order a new remote.

Jan 30, 2011 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...