Question about Linksys Wireless-N WRT150N Router

1 Answer

My router isn't working. all the lights stay on

My router isn't working. all the lights stay on solid. I even press the reset button in the back and no luck.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Make sure you're using a paper clip while pushing the reset button. Also the router has to be on while you're pushing it. Hold down the reset button for at least 30 secs-1 minute

Posted on Jul 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

Can i reset the router back to the default setting





  1. Locate the reset hole on the router. The button will be on the back or side of the router.


routerreset4.jpg


  1. Leave the router powered on.
  2. Use a paperclip (or similar) to press and hold in the reset button for 10 seconds.
  3. Remove the paperclip.
  4. Wait approximately one minute for the router to restart.

May 10, 2011 | Belkin F5D8236-4 Router

1 Answer

The lights on my router stay on and it won't start up.


There is a small reset button on the back side of the router, where you connect the cables.
Press it and hold it down for 30 seconds. You will need a pen or paper clip.
Release the reset button and wait for 1 minute. Make sure that the power light willl be solid on the router.
Once the power is solid and steady, unplug the power cable of the router. wait for 5 seconds and plug it back in.
When you reset the router, it will come back to the factory default settings and you will need to set up the router again.
Click here for step by step instructions to set up the router.

Oct 14, 2010 | Linksys WRT54G2 Wireless Router

1 Answer

My Linksys Wireless G Light is not on


Is the power light on the router blinking ?
If the power light is blinking and the WLAN light is not lit up then you will need to reset the router.
There is a small reset button on the back side of the router, where you connect the cables.
Press it and hold it down for 30 seconds. You will need a pen or paper clip.
Release the reset button and wait for 1 minute. Make sure that the power light willl be solid on the router.
Once the power is solid and steady, unplug the power cable of the router. wait for 5 seconds and plug it back in.
When you reset the router, it will come back to the factory default settings and you will need to set up the router again.
Click here for step by step instructions to set up the router.

Oct 03, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

My router does not seem to be working right; the power light is flashing very quickly and the signal is not being transmitted. how do i get my router to work again?


Press the reset button on the router. Hold it down for 30 seconds. release the reset button. Wait for 1 minute. unplug the power cable to the router and plug it back in.
Wait for 1 minute and check if the power light is Solid on the router.
If the power light on the router is flashing then the router is not working. Try to reset the router again. To press the reset button on the router use a paper clip or ball point pen.
If the power light is still flashing then try to reset the router again. If still the same thing then you will need to new router.

If the power light is sold then you can try to reconfigure the router.
Click Here for step by step by instructions

Sep 03, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

How do you reset the password for my WRT100


There is a small reset button on the back side of the router, where you connect the cables.
Press it and hold it down for 30 seconds. You will need a pen or paper clip.
Release the reset button and wait for 1 minute. Make sure that the power light willl be solid on the router.
Once the power is solid and steady, unplug the power cable of the router. wait for 5 seconds and plug it back in.
When you reset the router, it will come back to the factory default settings and you will need to set up the router again.
Click here for step by step instructions to set up the router.

Aug 11, 2010 | Linksys RangePlus WRT100 Wireless Router

1 Answer

WRT54GC linksys wireless router- suddenly all lights are flashing constantly and it does not work


Reset the router for 30 second.
There is a reset button on the router. For WRT54GC the reset button might be at the bottom of the router. There is a flap that you need to turn around. You will see a small reset button. Press it and hold it down for 30 seconds.
release the button. wait for 1 minute. unplug the power to the router and plug it back in.
wait for 1 minute and see if poer light becomes solid.
If not then try to reset the router again.
if the power light is solid then it is in working condition.
Once you reset the router it will come back to the factory default settings.
You will need to reconfigure the router for Internet connection.
If the pwer light is not solid and keep on flashing then it is not in working condition.
If your router is in warranty period then contact the manufacturer and get it replaced.
Click here for more information about router set up.

May 02, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Router/power light constantly flashing cannot make any connection to computer


try to reset the router. On the router you will find the reset button. press it and hold it down for 30 seconds. release the reset after 30 seconds. wait for 1 minute. unplug the power and plug it back in. wait for 1 minute and check if the power light stays solid.
If not then try to reset the router again.
check if the power light stays solid.
check the IP address on the computer. If you are getting a valid IP address then try to open the set up page of the router.
If you are not getting the valid IP address and power light is not solid then I think you will need a new router.

Click here for more information about the router

Mar 09, 2010 | Belkin (F5D7231-4) Wireless Router

1 Answer

WRT610n router power led light blinks and i cant


If the power light is blinking on the router , then it might not be working properly.
You will need to press the reset button on the back side of the router for 30 seconds. release it. unplug the power cable. plug it back in. wait for a minute and check if the power light is solid.
If not then try to reset the router again.
do the same thing and check if the power light is solid.

If the power light is solid then you will need to set up the router again.
If the power light is still blinking, then connect the computer to the router and check the IP address on the computer. If the IP address is 192.168.1.100 then try to open the set up page of the router and check the settings of the router.

Click Here for step by step instructions

Dec 01, 2009 | Linksys WRT610N Wireless Router

1 Answer

Will not reset after pressing button everything stays the same power light will not stay on the 4 port light will flash for a short while then they go out


HI! if reseting the router wont work by reseting it while its on.. do the hard reset, how? press the reset button while power is on and then after 10secs, unplug the power on the back of the router for 2secs and plug in while the reset button is still press, press it for 15secs.. then release.. leave it unplug for 10secs and plug in. if this issue wont fix, try to download the latest firmware for the router and upgrade the firmware.. after download is done, connect the router to ur computer and access the setup page of the router and do the upgrade..

Aug 12, 2009 | NetGear WGR614 Wireless Router

1 Answer

Cant get the BELKIN to work


From the manual:
Resetting the Router
Push and release the “Reset” button. The lights on the
Router will momentarily flash. The Power/Ready light will
begin to blink. When the Power/Ready light becomes solid
again, the reset is complete.
b. Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds,
then release it. The lights on the Router will momentarily
flash. The Power/Ready light will begin to blink. When the
Power/Ready light becomes solid again, the restore
is complete.

Feb 12, 2009 | Belkin (F5D5231-4) Router

Not finding what you are looking for?
Linksys Wireless-N WRT150N Router Logo

Related Topics:

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...