Question about Linksys BEFSR41 Cable/DSL Router W/4 Port Switch, Retail Box (DSLSBEFSR41)

2 Answers

Help Can you tell me how to get past step 9 ?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Linksys Master
  • 11,573 Answers

Wireless router installation

Posted on Jun 29, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 144 Answers

Hello!

-- what is exact message on step 9?
-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this also withou using the setup cd and see if this help solve your problem

Step 1: Shutdown the computer.
Step 2: Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and test the Internet connection.

Posted on May 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Password for guest Cisco connect


For me I am using my laptop and my laptop call Toshiba what can I do make my internet on for good cause it tell me that I have to enter password for Cisco quest access

Aug 18, 2014 | Routers

1 Answer

I recently installed a belkin router a few weeks ago and since then I have received a msg from the belkin rouer management telling me that my password has been changed. It tells me to click to enter the...


Jus ignore that message or remove it its not gonna cause u any problem

Jus right click on the router monitor software click on router settings


Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

Jan 07, 2011 | Belkin Basic Wireless Router

1 Answer

Cant connect to the internet wirelessly. I get a prompt telling me that the password has been changed.


Uninstall The BELKIN ROUTER MONITOR FROM THE CONTROL PANEL


WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

Dec 28, 2010 | Belkin Play N600 Wireless Dual Band Router...

1 Answer

Tring to conect to labtop but cant not sure if router is brodcasting and not sure how to tell or what the (ssin) is


WIRELESS SECURITY ISSUES
IF YOU DONT HAVE ANY WIRELESS COMPUTERS THAT ARE ONLINE ... THEN USE THE FOLLOWING STEPS


Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

Dec 22, 2010 | Belkin (F5D7230-4) Router (587009)

1 Answer

I have a wireless router connecting to my computer and xbox both are working fine and able acces the internet , how ever i am no longer able to access my wifi network which was working fine for the past...


Hi i got your issue ......

Try with the following steps ......

NOTE: Try these steps only for belkin router

Step 1: Connect modem >>router>>computer

Step 2: Open the browser page and on the address bar type http://192.168.2.1

Step 3: You will get a router page and towards the left column click on channel and ssid under wireless

Step 4: If asking for a password leave it blank and hit submit

Step 5: Select the wireless channel as 11 and change the ssid name to any other name and then click on apply changes

Step 6: Below channel and ssid click on security

Step 7: Select the security mode as 64 bit wep

Step 8: on key 1 type any 10 numbers and make note of those numbers that will be your password

Step 9: Now just below security click on wifi protected setup

Step 10: Disable it and then click on apply changes

Try connecting wireless you will able to go online

If yoy have any issues contact the 24/7 belkin technical support 1800-2235546

Thanks ....

With regards...

Priya

Oct 21, 2010 | Routers

1 Answer

Hi i have a Belkin G router and i can't acess the inter on my laptop could you please help, I dont know what to type in for my user name and passsword also domain please help


Step 1 : Connect Router - Computer ( Wired )

Step 2 : Open RSP By Typing 192.168.2.1 on the Address Bar of the Internet Explorer

Step 3 : On the Left Side Under Wireless Click WiFi Protected Setup

Step 4 : Leave the Password Blank And click Submit

Step 5 : Disable it And click Apply Changes

Step 6 : On the Left Side Under Wireless Click Security

Step 7 : Make a note of the Password ( PSK or Pre Shared Key )

Step 8 : Restart the Router

Step 9 : Now try to connect

Step 10 : If its Working Let Me know


Dec 25, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

I can't get past the istall router step on set up. I have verified the cables.


disable the windows firewall. Instead of putting the cable into the wan port you have to start the program with the cable into the lan and the program will tell you to switch to the wan port.

Nov 09, 2009 | Linksys WRT160N Wireless Router

1 Answer

Belkin g plus mimo nat problem


Step 1 : Check the IP Addressof the Xbox And take a note of it

Step 2 : Open RSP By typing 192.168.2.1 on the Address bar of the internet explorer

Step 3 : On the left side Click Firewall

Step 4 : Leave the Password blank and click Submit

Step 5 : Disable it And Apply Changes

Step 6 : On the left side Under Firewall Click DMZ

Step 7 : Add the IP Address of the XboX in DMZ

Step 8 : Click Apply Changes

Step 9 : Restart the Router

Step 10 : Test the Connection

Apr 12, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

My NAT type is modrete


Step 1 : Check the IP Addressof the Xbox And take a note of it

Step 2 : Open RSP By typing 192.168.2.1 on the Address bar of the internet explorer

Step 3 : On the left side Click Firewall

Step 4 : Leave the Password blank and click Submit

Step 5 : Disable it And Apply Changes

Step 6 : On the left side Under Firewall Click DMZ

Step 7 : Add the IP Address of the XboX in DMZ

Step 8 : Click Apply Changes

Step 9 : Restart the Router

Step 10 : Test the Connection

Feb 27, 2009 | Belkin (F5D7230-4) Router (587009)

Not finding what you are looking for?
Linksys BEFSR41 Cable/DSL Router W/4 Port Switch, Retail Box (DSLSBEFSR41) Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...