Question about SE Electronics Gemini Professional Microphone

1 Answer

My Gemini is fading in and out. There is no fixed pattern, except that it seems to fade out mostly when I sing into it, then comes back slowly. It may be caused by the fact that I left it in a place for two days where there was humidity.

Posted by on

  • nikigravino Jul 13, 2010

    Yep pretty much

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,561 Answers

Hello,

You will need to dismantle the your Gemini and dry all the component inside the device, may, the humidity as affected some component and causing the device to malfunction, if left to dry and the problem still persist, am afraid to tell you that, you might need to get another unit for replacement, if you still need more advice as regards this, you can drop comment for me to follow up,

Take care.

Posted on Jul 09, 2010

  • 1 more comment 
  • nikigravino Jul 09, 2010

    Hi, thanks for reply.
    You mean dry components with hair dryer, yes?
    When you say another unit you mean a new mic, yes?
    Do you think it would be worth sending to SE Elec repair centre?
    thanks

  • Sulaimon Jimoh Olayemi Jul 09, 2010

    Hello,

    Yes, drying the component with a low medium air dryer, if the problem still persist after the drying, you can send it for repair and if under warranty better, but if not, no problem, just be conscious of the cost, if cost of repair is almost as getting a new mic, go for a new mic, this will keep you rest assured without any problem.

    Take care.


  • nikigravino Jul 10, 2010

    thanks, tc

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Who sang "petals are faded"


Hank Snow sand Petals From a Faded Rose,

But there is a Christian Hymn called Petals are Fading. The Primitive Quartet sing it, but I don't know if it is theirs originally.

Jul 05, 2017 | Cars & Trucks

2 Answers

What is the reason for my E701i-A3 failure? All boards were replaced, worked for a minute, and then had the same "fade to black" failure as the first time.


Your back light controller board or the ballasts for them may be bad if they weren't incorporated into the power supply board.

Dec 05, 2016 | Televison & Video

1 Answer

Konica C250 has a faded line on the prints. Prints colors well except for the Faded line.


The developer powder needs to be replace. for whatever color that's faded, wont be the drums.

Sep 06, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

CAD Trion 6000 Not the best sounding and fades out when you sing loud into it and fades back in when you stop singing .I have 2 of these and the other works perfect with the same cable and mixer.


This possibly could be a moisture problem. Condeser type mics are VERY high impedance elements and any electrical leakage will make them cease working.

Also check that foam wind screen is not hitting the element.

Sep 27, 2009 | CAD Microphones Trion 6000 Microphone

1 Answer

PCN5425R Fading in and out


No It is not the picture tube.
First, I would suspect a bad solder connection (cold solder connection) to find this problem hit the side cassing to see if the picuture goes away or comes back.
Another way is take the back cover off and tap gently on the boards with something not conductive or your hair would look like mine. The most commond section is power supply and neer the Horizontal flyback transformor.
The horizontal transformor look at it, it's a big greyish darty little thing about 3" x 4" and stand up about 4" with a big red wire going out of it. Don't touch it, it has very high voltages, just look what it done to my hair I'm telling you don't touch it along with it's red lead's. Just look to see if it is arking if so replace it.

When you have convegence problem , it is mis aligment of the colours in the genmentry aligments.
I would suspect more in the power supply section.

Regards

What about Bob
Timmins, Ontario
Home of Shania Twain.

Mar 08, 2008 | Samsung PCN5425R 54" Rear Projection...

1 Answer

Radio frequency fades after few seconds


your headset wires are the antenna of your phone... be sure to let it loose freely to avoid the frequency fading... dont fold it...

Oct 27, 2007 | Sony Ericsson Walkman W810i Cellular Phone

1 Answer

COLOR PROBLEM


Is the pic full? Or is this pink square full and the pic seem squeed?

Jan 03, 2007 | Panasonic PT-47WX51 47" Rear Projection...

1 Answer

Panasonic 47" rear projection faded pink square


That is a unique problem. You might make sure that your mirror and lenses are clean and that nothing has fell in the way of the tubes. There isnt anything else that could come to mind that would cause this.

Dec 20, 2006 | Sony Grand WEGA KDF-55WF655 36" Rear...

1 Answer

Picture faded to black, came back, faded again and had stayed black.


It seems your set has a loose conection in the high voltage circuits,in fact by now it should have many loose conections in different areas like the power supply and the horizontal deflection circuits,if you are familiar with tv service you can use the information as the first step to take,some of the loose conections are hard to see even for the trained technician but the one giving you this problem should not be hard to see,if you are not too familiar with tv service be safe and call for assistance from a servicer a least for an estimate.

Oct 11, 2006 | Mitsubishi CS-40507 40" TV

Not finding what you are looking for?
SE Electronics Gemini Professional Microphone Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top SE Electronics Audio Players & Recorders Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

Willem.
Willem.

Level 2 Expert

359 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Are you a SE Electronics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...