Question about Zebra 105SL Thermal Label Printer
How to install a zebra 105sl printer
Install? Well that could mean a lot of different things. Just plug it up and run the ribbon and labels through their correct paths. I don't know anything about your network. (If you even need to set it up that way.) You can just connect it to the back of your PC. Follow this link. This will tell you all about the specifications of the 105SL. Not really your connections though....... http://www.intermeccorp.com/pdf/105SLusersguide.pdf
Posted on Aug 26, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
go to the configuration on the printer. Scroll through until you reach the network settings. You can display or print the results, which will show the MAC address. Also, if you have a PC on the same network, and you know the IP of the printer, you can look at your ARP tables and find the MAC associated with the IP. ARP -a at the dos prompt
Posted on Jun 23, 2009
SOURCE: Increasing Speed on Zebra 105sl
If you are refering to print speed, from the label format, press F5 to bring up the LABEL & SETUP PROPERTIES. Click on LABEL OPTIONS and print speed will be the first choice.
If you are refering to how fast data is sent to the printer, then that depends on the connection to the PC and whether you are using true-type fonts or not.
Hope that helps !
Posted on Apr 27, 2010
SOURCE: Zebra 105sl felt paper error
check if the sensors behind the printhead (small metal open case)is on the same position that the uper sensor(black plastic bit with the screw behind the printhead) Run the sensor profile, check if he check the gap.
run manual calibration from the settings.
worst case senario, Reset the printer to Factory defult (Press PAUSE and CANCEL buttons and tun printer on, then relese the butons after 5 secounds.
Posted on Nov 13, 2010
Tips for a great answer:
Feb 13, 2014 | Zebra 105SL Thermal Label Printer
Feb 17, 2012 | Zebra 105SL Thermal Label Printer
Apr 15, 2011 | Zebra 105SL Thermal Label Printer
Jan 20, 2011 | Zebra 105SL Thermal Label Printer
Sep 14, 2010 | Zebra 105SL Thermal Label Printer
Jul 06, 2010 | Zebra 105SL Thermal Label Printer
May 13, 2010 | Zebra 105SL Thermal Label Printer
Oct 19, 2009 | Zebra 105SL Label Printer
Mar 10, 2009 | Zebra 105SL Thermal Label Printer
574 people viewed this question
Usually answered in minutes!