Question about Pc America Restaurant Pro Express

1 Answer

Had to re-install software. Can't get past the admin/password box. Typed in the default "admin" but the software wants a password. Can't restore database or get into the application.

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Pc America Expert
  • 310 Answers

The default settings are cashier id: 01 and password: admin
If you changed them, you need to used the changed ones.
If you backed up your database before the re-install, then you should not choose to KEEP EXISTING DATABASE, but rather create a new one. This will let you into the software with the default settings. Then you can restore the backup by using the default password: admin. The database should be named 'cresql' unless you have a different name for it.
However, once restored, you will still need the changed password to open and run the software. If you don't have it, it can only be changed by programming a new one into the database directly with other software. Technically difficult. If you need help, sysadmin@ccybernet.com

Posted on Jul 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I ask to join and they ask for password and i typed in password and it will let me join


Try using the same security settings as your existing network by selecting the "Use the same security mode" check box when setting the your extender.

Jul 02, 2014 | NetGear Universal WiFi Range Extender...

Tip

How To Reset Your Linksys Router Password


If you have forgotten your Linksys router password, the easiest thing to do is to reset your router to the factory default settings and then go through the router setup process.
  1. To restore the router configuration to factory defaults, hold the reset button on the unit for 30 seconds.
  2. Once your router is hard reset, you will need to login and go through the router setup process.
  3. To reconfigure your Linksys, connect a PC to one of it's Ethernet ports, load a web browser, and go to http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router.
  4. On older Linksys routers, the default username is blank and the default password is "admin."
  5. On newer Linksys routers, both the default username and the default password are set to "admin."
  6. Once you are past the login screen, you are able to reconfigure the Linksys router.
  7. Go to the management tab and change the administrator password to keep others from accessing your router.

on Jul 12, 2010 | Computers & Internet

1 Answer

NETGEAR wnr2000v3 router not accepting default password after reset


I have the same problem but can not even log in for the 1st time. admin and password do NOT work. And when I checked the ip address w/ the ipconfig /all aomand in a command prompt, I found that it has ip address 192.168.5.1 So when I tried to log in to that page, it prompted me for a user & password. Again, admin and password did NOT work. Also, tried 1234 for the pasword with no luck. Is this box defective??

May 04, 2012 | NetGear N300 Wireless Router

1 Answer

I have change the username and password but I for get it .I asked many people to solve it but theycannot did it .so I needed help(How can I get the username and password of wireless router TP link?)


if you want router login password you can try user name as admin and password as admin/password if you want to check the wireless password set up to your computer then

1) press and hole the windows key on keyboard which is next to ctrl key and then press "R"

2)In the box type cmd click on ok

3)you would get a black screen with a blinking cursor where you can type

4)type " ipconfig " hit enter

5) ther would be few numbers typed next to default gate way (eg: 192.168.1.1)

6) type the default gate way number in the adress box of internet explorer

7) it would ask you for user name and password  you can try user name as "admin "and password as "admin/password " it would direct you to router page

8)there you can check the wireless password in wireless settings option.

Jul 28, 2011 | Computers & Internet

2 Answers

In my browser address bar i typed 192.168.1.1. when prompted i left user name blank and typed in the default password to my router 'admin'. I cannot get access to change my security pin from the...


You need to factory reset the router by holding down the little button on the back of the router (use a paper clip to push it). After doing so it will reset the password to the default which is admin.

May 06, 2011 | Linksys WRT54G2 Wireless Router

1 Answer

How i can change my wirless net password


If you have forgotten your Linksys router password, the easiestthing to do is to reset your router to the factory default settings. To restore therouter configuration to factory defaults, hold the reset button on the unit for30 seconds.


Once your router is hard reset, you will need tologin and reconfigure it again.

To reconfigure your Linksys,connect a PC to one of it's Ethernet ports, load a web browser, and go to theURL http://192.168.1.1/. This will take youto a popup box which asks you to enter a username and password to login to yourrouter.
Linksys Default Password

On older Linksys routers, the default username is blank and thedefault password is "admin." On newer Linksys routers, both thedefault username and the default password are set to "admin."

Once you are past the login screen, you are able to reconfigurethe Linksys router.
You want to go to the management tab and change the administrator password tosomething else to keep others from accessing your router.

Apr 05, 2011 | Linksys WAG200G Router

1 Answer

I need to limit access to my wlan router. How do I do it? I typed 192.168.1.1 in the address bar of the Internet Explorer and hit enter. I then typed admin in the username box and password in the password...


You could try "admin" as the username and "password1" as the password, or "admin" as the username and no password. If neither of those work, you might have to contact Linksys tech support.

Once you get into your router's settings, there are several things you can do to limit access to your router. The first thing is to change the default password. You can also change your network name (SSID), enable MAC filtering, or turn on WEP, WPA, or WPA2 security, depending on which options your router and computers support.

Jun 22, 2010 | Computers & Internet

1 Answer

How to access to the router's web-based page. I did typed in the word "admin" in the password box. Won't pop up to show the page, just said "401 Authorization Required" for some stupid reason


The default login and password is admin
If you still have difficulties because you had changed the password, the you can reset the router back to the defaults by :-
Pressing the pinhole reset button with power on for 30 secs, it should restart, then enter the router's URL configuration in your Browser
http://192.168.1.1

Feb 04, 2010 | Linksys WRT160N Wireless Router

3 Answers

How can I reset an unknown admin pw on Linksys RV042 VPN Router? I'm the new IT guy here, and I don't have the admin pw for our VPN router (and I need to provide remote access to a colleage working...


you have forgotten your LinkSys router password, the easiest thing to do is to reset your router to the factory default settings.
To restore the router configuration to factory defaults, hold the reset button on the unit for 30 seconds.
Once your router is hard reset, you will need to login and reconfigure it again.
To reconfigure your LinkSys, connect a PC to one of it's Ethernet ports, load a web browser, and go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router Password: Admin
On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."
Once you are past the login screen, you are able to reconfigure the LinkSys router

Apr 16, 2009 | Linksys RV042 VPN Router

1 Answer

Linksys BEFSR41


k do reset the linksys-look @ the bottem u can see a red hole reset>and put the power on to the device and take a pen or paper clip>press it and hold it for 40 seconds with power and relese and reboot and u can use the default one which is (admin) as user name and (admin) as password all lower case>and rate me solved if its helps

Oct 27, 2007 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

Not finding what you are looking for?
Computers & Internet Logo

476 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pc America Computers & Internet Experts

sunil dixit

Level 2 Expert

70 Answers

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

pravintechno

Level 1 Expert

19 Answers

Are you a Pc America Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...