Question about Phones

3 Answers

I have motorola V190. I have alway had my phone locked because to many people wanted use it all the time. My unlocked code as allways worked. Today it will not. I did not change it. Can you help me please. Yes I know they are out dated. But right now we can not up date them now. Money is reall tight here. NO JOBS !

Posted by on

  • kimkaye Apr 19, 2008

    THANK YOU SOOOOO MUCH

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Try this:
If you forget your unlock code: At the Enter Unlock Code prompt, try entering 1234 or the last four digits of your phone
number. If that doesn’t work, press ( the key with 4 horizontal lines) and enter your 6-digit security code instead. If this doesn't work let me know. May be able to get in through your sim card. Then again you may have a sim card going bad. Try these and let me know. Good luck.

Posted on Apr 19, 2008

  • 1 more comment 
  • Jeffrey Pemberton
    Jeffrey Pemberton Apr 19, 2008

    I know you didn't forget your code but one of these may be able to get you in.

  • Jeffrey Pemberton
    Jeffrey Pemberton Apr 19, 2008

    Who solved your problem? Please rate only the one person's solution that solved your problem as fixed. Make sure you rate it as fixed by their solution. Thanks.

  • Jeffrey Pemberton
    Jeffrey Pemberton Apr 24, 2008

    Would you mind please rating the one solution that solved your problem as fixed. It would be greatly appreciated. Thanks much.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

I would first contact Motorola and explain your problem and tell them you have the code and tell them what it is and they should be able to figure out exactly what you need to do over the phone

Cell Phone/Mobile Devices & Bluetooth:
Email or give us a call at 1-866-Buy-Moto (1-866-289-6686) Monday through Friday from 7:00 a.m. to 10:00 p.m., Saturday and Sunday 9:00 a.m. to 6:00 p.m. (CST)

Thank you for using Fixya

feel free to ask me any further questions you may have and Good luck to you.

Posted on Apr 19, 2008

  • Benjamin Patri
    Benjamin Patri Apr 20, 2008

    sounds good, please don't forget to rate this solution

  • Benjamin Patri
    Benjamin Patri Apr 24, 2008

    Please don't forget to rate this solution as that is one of the biggest aspects of all this website works



    otherwise please let me know if you have further questions



    Thank you

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

Hi firned

u have loak your phone there is no solutlion for u have go for mobile repairer he has a software find the code of your mobile u have to pay for this $5to 20$

Posted on Apr 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I unlock


  • Get Help: Call Customer Service
    1-888-331-3383
  • Email support@motorolacordless.us
Mark
Motorola Support

Dec 18, 2014 | Motorola Mobility IT6 DECT 6.0 Digital...

3 Answers

I own an i730 Motorola. Bought it a few years ago when I was with Southern Linc. I have never used it for anything other than the walkie-talkie. My Nextel i710 Motorola transmit button stopped working...


Hi, Welcome to FixYa

This document is also available in PDF format (this PDF has higher qualify images and a password and is not free. It requires purchase, with your purchase, you will receive the HEX file for Raptor Pro that's mentioned in this web page) for easier viewing and printing.

RSS Carrier + iDENPro
fc55141.jpg
Phone Power: On
i-DEN phones are made by Motorola. They use SIM cards and look like GSM phones, but they are not GSM. The most popular iDEN network in the US is Nextel (now with Sprint) and Boost (owned by Nextel)
For most i-Den phones, use the RSS Carrier to put the phone RSS-SIM mode. Then use iDEN Pro.
It is recommended that you use the USB cable for Motorola iDEN phone when using RSS carrier and iDEN pro. Pay attention, the iDEN cable is very similar to the Motorola V600 cable, but a bit wider. So be careful not to confuse them.

RSS Carrier is useful for reading either the six-digit or four-digit phone or user security code. However, the actual unlocking of the Service Provider lock is done with iDEN Pro software.
Once you connected the phone, some times it will prompt you to install the driver, just follow the instruction and install it automatically. If it does not work, try to manually install the driver from the directory, which the Motorola RSS is located.
Assuming the driver has been successfully installed already. You should open the RSS Carrier software, click on File and Read Phone. This should put the phone into RSS-SIM mode.
Now you can exit RSS. Open the iDEN Pro software, and wait for it to detect the phone. Then click on Script | Open Script. Open a file under the iDEN Pro directory called “command3.txt” and then go to Script | Run Script. The phone should restart after the script is finished. Now test with a different SIM card.
Raptor Pro For a long time, Raptor Pro was not updated and stopped supporting any phones newer than the i405. However, recently the Raptor Pro’s hex file has been updated to support almost all i-DEN phones on the market. To unlock, i-DEN i880, i885, Raptor Pro (keep in mind the Hex File can be found under C:\Program Files\Raptor Pro\Hex File) has to be updated to support this type of phone. Make sure a SIM card is insider the phone and the phone should be on and ask for a special subsidy code. Then you should connect the phone using serial cable on COM1 and run Raptor Pro. It will take few minutes and give you the unlock code. It should be the first one. After getting your unlock code, try to put it into your phone with a different SIM.

Tip Some times when a person insert a different SIM and has entered the incorrect unlock code more than few times, the phone will show “Enter Special Code, Please Wait” or “Contact Service Provider”. In this case, you need to wait up to one hour for the phone to allow you to enter the unlock code again.

Thank you for using FixYa. Have a nice day and please remember to rate this solution as FixYa if it helped you.

Jun 30, 2008 | Phones

1 Answer

Motorola razr unlock sim card


Is your sim locked with any particular network?You can approach Mobileunlocksolutions.com and get the unique unlock code for your Motorola Razr.You need to specify the country,locked network and based on the availability you can get the unlock code along with free unlock instructions.

Aug 04, 2013 | Phones

1 Answer

Unlocking motorola w375


To get the Phone Unlocked from Network lock,You can use the Unlock code,you can get the Unlock code from here Mobileunlocksolutions.com and unlock it.

Oct 01, 2011 | Motorola Phones

1 Answer

Hi i have a vodafone 541 and i want to put another sim in it from another service provider can you give me a free unlock code please


Free Unlock code is not possible and easy to get for the Phone,if you get also it will not work always correctly,sometime it may be wrong...But paid is Correct code gather from Network database,You can get the Paid Unlock code to Unlock the Phone from the Network Lock,You can get the UNLOCK CODE from here Superunlockcodes and Unlock it,there You can get the code at low cost,you can get the Free Unlocking instructions at here Mobileunlockguide Check code for Current Network lock,Country and get the code...

Jun 29, 2011 | Phones

1 Answer

I need subsidy code for motorola V300 T-Mobile as i have moved out of US and want to use that phone...pls help


To unlock your GSM Motorola phone with the correct subsidy code insert a sim card different than the service provider that the phone is locked to. The phone will display "Enter Subsidy Code". Just enter your code and the phone will be permanently unlocked. You will never have to unlock your phone again! For the code to work your phone must say "Enter Subsidy Code." Do not try to enter the wrong code if you don't know what it is or your phone will become hard locked and display "Contact Service Provider". A subsidy unlock code will not work if your phone displays "Contact Service Provider." If your phone displays "Contact Service Provider" please click here to unlock your phone with a cable and software or let the phone sit for an hour or so until it says "Enter Subsidy Code" again.

Nov 29, 2008 | Phones

1 Answer

Motorola v3a (enter unlock code)


I have the same phone, and the opposite problem. I want to lock my phone because people use it while I'm sleeping and stuff. When the battery is low and beeps, they plug it in but keep talking!(ruining my battery life) Sick of it, so tried to lock it but I can't figure out the code!

Jul 04, 2008 | NorStar T7316E Corded Phone

6 Answers

Unlock code for motorola bc50


free codes to unlock bc50 motorola phone

Jun 19, 2008 | Phones

Not finding what you are looking for?
Phones Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...