Question about Kenwood KDC-2011S CD Player

1 Answer

I have power to the receiver but i have no display any ideas would be greatly appreciated

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Kenwood Master
  • 17,129 Answers

Since there is power to the receiver, you will have to open the set and trace from the main pcb. see if the smps circuit ( main Power) gives the required voltages to the processor boards. You will have to use a multimeter for checking the +5 to the micro processor, the display voltages, the cord to the display, the display drive. only a though test on these units will you be able to arrive at the issue. If there is no response, you will need to replace the main board. hope this helps for a decision. Good day

Posted on Jul 09, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hello: I would like to know if you could tell me if there is a way to get this receiver to work again. As it does not turn on when powering it up.

It sounds like the power supply has gone out on it, I am having no luck in finding a replacement part for you though, sorry.

May 12, 2016 | Yamaha RX-SL100 Receiver

2 Answers

Hisense TV and Onkyo Receiver connected in the out. Sound great. However can't get the Onkyo remote to connect to the TV any ideas would be appreciated thank you!

Hello Kaliesha, Try to program the remote using one of the following codes - 12846, 12098, 13519, 12183, 10556, 13123, 10508, 14029, 10208, 13382. Thanks, FJD

May 05, 2016 | Onkyo Audio Players & Recorders

1 Answer

My Harman Kardon 300B receiver has a humm in the left channel. What should I check first? Any ideas would be greatly appreciated!

Isolate it to a source if possible; make sure none of your cables or speaker wires run by power cords or sources of high magnetic fields. I had hum caused by track lighting.

Jul 03, 2010 | Audio Players & Recorders

1 Answer

Hi,I have a Sony STR-D990 Receiver,and when I plug in power I see light on volume knob only, no other light turns on like the display etc. Please for some ideas on what i can do to fix this amp ,it's old...

I had the same problem with mine. Turned out to be a bad solder connection on the Printed Circuit Board on top of the power transformer towards the rear of the reciever. If you flex the board by the connector going to the display you might see it come and go. I resoldered the connections and now all is good.

Apr 29, 2010 | Sony Audio Players & Recorders

1 Answer

Pioneer VSX-918V-K Standby Light Flashes but will not turn on.

unplug it and press the power buton and then hold the power button, and while your holding the power button, plug it back in

hope it worked!!!

Jul 30, 2009 | Pioneer Audio Players & Recorders

1 Answer

AV-S17 - Clock Display won't stay on?

Check the internal memory battery if there is one, then reset the sleep setting? Check the manual regarding memory back up.
Sonic Doctor

Mar 27, 2009 | Aiwa AV-S17 Receiver

1 Answer

I can't get past the ''searching for Sattellite'' display

Doublecheck your connections. The connection from the dish should be on "Satellite in", NOT "In from antenna." That is the most common mistake that is made.

Mar 19, 2009 | Directv D12-300/100 DTV Receiver

1 Answer

Receiver won't turn on. All I got is the flashing light.

Try pushing these buttons at the same timwe for a few seconds:
Advanced Surround + Enter..

'Advaned Surround' will be found in the front panel and 'Return' near the multi-jog dial.


Mar 09, 2008 | Pioneer VSX-D712 Receiver

2 Answers

Sound is There Then its Gone!

You will need to trouble shoot the audio output amp section. It sounds like the unit is in a shut down or a protection mode. Good Luck

Mar 19, 2007 | Harman Kardon AVR 235 Receiver

1 Answer

Display stopped working

My Alpine CDA-7842 works fine from a functional point of view but the display (readout) had stopped working. All the lights on the display work but the actual readout is blank. At first the readout would intermittently work now it's completely dead. Any assistance would be greatly appreciated.


Oct 26, 2006 | Alpine CDA-7842

Not finding what you are looking for?
Kenwood KDC-2011S CD Player Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4862 Answers


Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides