My pc will not go on standy it just turns off and then immediately starts up again won't rest

With ya'lls perty white heavy snow,it made your wipers get unaligned,you will have to remove and reset.It's not good to remove snow from wipers when windshield is loaded,get a scraper or blower and go at it.Wish we got snow.

plz give me the ans

Something is wrong in your start circuit. From battery to ignition switch, and ending at the starter solenoid. You would have to start checking for where power is lost between the switch and the starter. If you have power to the starter solenoid on the small wire at the starter (can check with a test light while someone holds the key in start), then the starter would need testing.

Usually this symptom means a clogged filter, gas tank outlet tube is plugged or a clogged needle valve. But if it smells gassy it is probably not starving, but may be running too rich. If it does not smell gassy then it's probably a fuel delivery problem. Sometime rubber fuel hoses can swell up inside and restrict flow.

The first thing to do is check that the charger is putting out the correct voltage, which should be ~18 volt. Then try to start it without the battery.
If your voltage is OK and the battery out makes no difference, then I would suspect that you have a motherboard problem that must be fixed. If the computer starts up if you wiggle the DC plug where it goes into the computer, then it's the DC jack that is looks and must be re-soldered.

I would say your ignition coil is bad. They get hot and quit working until they cool off then work again.

Reboot your PC and immediately start tapping the F8 key, then choose to start in safe mode. Now click the start button, then click run. Type MSCONFIG and choose startup programs and disable all startup programs and see if it boots ok. If it does you can retype msconfig and one at a time re-enable your startup programs until you find the one that makes your PC hang and reboot, Keep that one turned off after you find it, and re-enable the rest of your startup items.

I'm guessing that there is a blinking red light in there somewhere...

If so, it's a overheating problem. Let your PS3 sit for a day and get it away from everything that makes heat, carpet, and atleast 4 inches away from everything in general.

if it escalates to immediately turning off and blinking yellow and then red with 3 beeps, you havbe the Yellow Light of Death. This is a console killer but can be fixed by professionals.


If that happens then remake the question on here saying you have the YLoD.

if you now how to used soldering iron , resolder your tv

u need to chk camera settings or else normal reset ur fone...