Playing a game and it turned off with the light flashing red turned power off and back on stayed on for a moment then started flashing red again

There are two ways to sync the Wii remote with the Wii console after pressing the red sync button like you did:

1) Press the "1" and "2" buttons on the Wii remote until the lights begin to flash. This method provides a temporary connection to the Wii.
2) Open the battery cover on the Wii remote and press the red button next to the batteries. This creates a permanent connection or "pair" between the Wii remote and the Wii console.
Based on your description, it sounds like you are using method #1. In order to power on the Wii when the Wii's red light is on (meaning the machine is turned off) and start playing games like you want, method #2 must be used.
Imagine method #1 as "guest mode". If a friend comes over with their Wii remote and wants to play a game, you would open up the game first, use method #1, and your friend would temporarily be connected to the Wii. Using method #1 is like "owner mode" that lets the Wii remote turn the console on and off and always stay connected to it.
Hope this helps!

hello

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} There's a switch in the back, the only benefit of using the power button is that it can be turned back on with the controller. Dont use the switch when your game is saving or anything is downloading because you could corrupt the saved game/download (I don't think it'll let you turn it off from the front button when it's writing to the hard drive- the switch in the back actually cuts off the power.).

Take care.

unlock ps3 in less than 1 hour yourself
www.repair-ps3.co.cc

they have videos on youtube to fix that

it's scaler chip is damaged, if it shows the e74 error. but if it isnt, your scaler chip is somehow getting damaged by overheating. my advice is to buy a intercooler.

It doesnt cost money to bring it in to microsoft. Usually they will send you a box and you put your 360 in the box and ship it to them for free.

or you can try to get your money back if you hve a receit i say give it bak and get you a new one. or see if you can find one ebay or game stores

Hi, this is heat related and, this issue may have damaged your power supply board. if the red lights continue to flash after you have unplugged this unit for 5 minutes, this will confirm power board failure and, you will need to replace this circuit board.

You can purchase a replacement power supply unit at this link below and i also advise to purchase a cooling adapter for your system as well. this will prevent this form happening again in the future.


CLICK HERE TO PURCHASE A NEW POWER SUPPLY FOR YOUR PS3.

CLICK HERE TO PURCHASE YOUR MEGA POWER MINI COOLING SYSTEM FOR YOUR PS3

it is fried and needs repairs if you break the seal by trying it yourself you void the warrany

I have been playing today and just gone back on and not one game will load