Question about Projection Televisions

2 Answers

How to remove circuit boards on a mitsubishi vs-5051? have intermittment sound. hit side of set and comes back.Also another problem started tonight and that is now when set comes on the picute is distorted. again tap set and it may come back for awhile. have set open and can move circuit boards and make the problem disapear. was wanting to reset all boards and worst case remove main board and look for bad solder joints. thks ****.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 427 Answers

For a projection TV, i would mess with it, especially the circuit board, especially since it is soo sensitive. I would prefer talking with a trained tecnician to see if there is a simpler solution.

Posted on Apr 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

I'd look at the wiring first, actually...and interconnects, myself.

Posted on Apr 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Mitsubishi VS-5051 50"


MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (MDEA)
9351 Jeronimo Rd. Irvine, CA 92618
Email: mdeaservice@mdea.com to contact us.

MDEA SERVICE REFERRALS
phone: 800. 332.2119 (Online referral;
automated system-must use a touch-tone phone)


THREE DIAMOND® CARD
Customer Service
phone: 800. 656.3005
Manage your account Online


MDEA WARRANTY DEPARTMENT
Mitsubishi Extended Warranty Programs
phone: 800. 888.8245
fax: 949. 609.4912
Document Fax-Back System

MDEA PARTS DEPARTMENT
Service Parts Including Instruction Books and
Remote Controls
phone: 800. 553.7278
fax: 800. 825.6655


MDEA CONSUMER RELATIONS
Product Information, Brochure Requests,
and Customer Service Assistance
phone: 800. 332.2119

May 04, 2008 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

I do not have a manual for my set


Howdy,

That Model is:
Height: 15 13/32
Width: 42 13/16
Depth: 22 19/32
Weight: 183 lbs.

I hope this information was helpful.

Good Day, Big Irish.

Nov 23, 2009 | Mitsubishi VS-50800 50" Rear Projection...

38 Answers

Mitsubishi vs-5051


Dear FixYa Customers Concerning HIGH END TV Repair especially REAR PROJECTION TV ,

I've had it with all the TV TECHS trying desperately to fix a lot of different HIGH END REAR PROJECTION and other HIGH END TV SYSTEMS!
Don't you all get it .......
THESE ARE SOME OF THE LARGEST MOST SOPHISTICATED COMPANIES IN THE WORLD AND I'D BET A LOT OF THEM GOT TOGETHER OR JUST DECIDED INDIVIDUALLY THAT TV SYSTEMS HAVE BEEN PERFECTED SO IF THEY'RE GOING TO SELL MORE IN THE FUTURE THE ONES THEY'VE SOLD MUST DIE OR COST ALMOST AS MUCH TO FIX AS TO BUY A NEWER IMPROVED ONE!
HAS ANYONE EVER SEEN A TV LAST MORE THAN 10 YEARS IN THE LAST DECADE? IF YOU HAVE I'D SURE LIKE A LIST OF THE MANUFACTURERS TO HELP ME SOLVE THIS PROBLEM! WE ALL NEED TO START TAKING PRIDE IN CREATING THINGS THAT DON'T BREAK AND STOP WORRYING BECAUSE THE NEW THINGS WE WILL CREATE WILL MAKE US BUY THEM ANYWAY UNLESS WE CAN'T AFFORD THEM BUT THEN AT LEAST WE WOULD STILL HAVE OUR PRIDE OF CRAFTSMANSHIP FROM BUILDING THINGS THAT DON'T BREAK!
I recommend buying the newest latest model if you can afford it or buying a cheap set while waiting for the price of the high end tvs to go down!

jackiaria
8a140f0.jpg
Know this won't FixYa but please rate me anyway!!!!

Jan 13, 2009 | Projection Televisions

1 Answer

Mitsubishi VS-5071 rear projection turns on, has audio but no video


That is a VZ3 chassis, similar to Mitsubishi models Ts-4545, Ts-5045, Ts-5545, Vs-4543, Vs-4544, Vs-5043, Vs-5044, Vs-5047, Vs-6043, Vs-6047 and has common failures in the vertical circuit, specifically vert Ic401 which is a La7845 which is usually caused by defective C402 100uf 50v and/or open 1.2 ohm 2 watt R510 next to FBT.
If not that check C268 off Q215 on signal board 22mf/50v and Ic200 on signal module Cxa2025s. However the vertical failure is more likely.
Bill

Sep 10, 2008 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

Mitsubishi 5051


I can help you here follw my pictures and be sure you have a reciever hooked up so the TV can identify it.In some cases like in picture #2 you have to tell the TV that its on by entering it in your self ,(notice the pic.2 Ive selected NO on right side ) you have to use the Volume /Enter keys to make the change,and you probably already learned that you have to highlite each move your at that your changing.d116022.jpg9f9fa1f.jpg

Mar 17, 2008 | Mitsubishi VS-50501 50" Rear Projection...

3 Answers

Mitsubishi vs 5051 rear projection tv sound but no picture


No video but good audio Mitsubishi VS5051. Check R509 and R 519, 100 ohm resistors located on the main PCB near the flyback transformer. Also bad connections on any of the yokes and the vertical output IC will cause the same problem.

Sep 19, 2007 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

Mitsubishi vs-5051


First you can safely take off back and look for Screen controls&Focus, Gently turn up the 3 screen controls this will add light to picture, but you need to evenly turn up, the 3 colors are red, blue, green. the other 3 knobs are for focus. Do not turn them if you do you will need to realign the focus also. And if this doesn't help then there is a high voltage capacitor leaky in the flyback area.

Sep 14, 2007 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

Mits VS-6071 Repairman removed a part and left never came back


it might be the digital tuner board, or an audio board did it come from the front or rear of the TV can you post a pic of it?

Dec 18, 2006 | Mitsubishi VS-60719 60" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...