Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Washing machine keeps stoppping.

After the cycle starts it stops then beeps. The clothes are all even and on balance. when the taps start up they keep stopping and starting very quickly.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Fisher and P... Master
  • 713 Answers

Hi just read your posting.Now when the machine starts to beep it will show a series of lights.These lights will be in a row of 8 lights.Starting from the left to right which ones are lit when the machine is beeping?Is it the 2nd and 5th or the 4th and 7th ---etc---?Please reply with additional information and I can help you further.

Posted on Jul 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water goes in it washes for little while then buzzer starts before wash cycle ends


Hi Gina,
When your machine stops during the cycle does it beep & hold some of the wash progress lights on?
This is how it displays where the fault is coming from.
The motor controller is the most common for this type of fault.
Thanks
Damien

Nov 07, 2015 | Fisher and Paykel Washing Machines

1 Answer

Stops and starts filling in short bursts then stops all together by beeping with the first and last light remain on how can I fix this ?


some machine use this filling process as a means of achieving a complete balance of clothes for the cycle
check that the program is not on long soak before it starts to wash
If you have everything as per the manual then call the technician as there may be a problem in the board

Jun 30, 2015 | Washing Machines

1 Answer

Our miele w911 washing machine keeps stopping in the main wash cycle - red light above the tap symbol. What does it mean?


check that the water flow solenoid is operational and not blocking of the spray rinse requriement

Mar 23, 2015 | Miele Washing Machines

1 Answer

Hello. Recently my fisher &PAkel smart drive 703 was removed from its connections as we renovated our laundry. When it was reconnected by our tiler, it stopped working properly. This is what hap


Need to know the error code to help you. When it beeps, take note of the top row of lights & count from right to left. Tell me exactly which lights are on & which are off. Also, tell me if any other lights are blinking. The only thing the tiler would of disconnected are the inlet water hoses. Check that the hose from the cold tap is on the cold inlet & hot tap is on the hot inlet. Marked C & H on back of panel.

Mar 06, 2017 | Fisher and Paykel Washing Machines

1 Answer

Start matsui washing machine


Check the washer drain hose for clogs.

Jun 19, 2017 | Washing Machines

2 Answers

Simpson eziset 550 stops at rinse cycle, light flashing


I had the same problem before, but removing the kink in drain hose does the trick. Maybe yours is more complicated but try it.

Aug 28, 2012 | Washing Machines

1 Answer

My Westinghouse lt908s washing machine has started bundling clothes up and knocking sides of machine. Even after opening lid and redistributing load evenly it keeps spinning then bundles up load and knocks...


May be a problem with agitator gear box,open on wash cycle and use screwdriver to by pass cut off switch by pushing screwdriver down on little switch that is located where tab on lid is.If agitator is traveling at too much of a rotation that may be cause,also agitator mat be lose if you can grab and move up and down.Then remove cap on top of agitator and tighten bolt,if lose if not agitator may need to be replaced!

Jun 12, 2011 | Westinghouse Washing Machines

2 Answers

My hoover galaxy washing machine stops when clothes are not balanced properly.i have to even out the clothes then start the machine.if the clothes are balanced it finishes its cycle.if not the machine...


Hi

It is normal for the drum to sway excessively and hit the balance switch if the load is not evenly distributed around the drum or if you have excess cloths.

Once the balance switch is trigerred, you can reset by openning and closing the door. It is a safety mechanism which stops the spin cycle if the drum sways excessively.

If this tends to happen often, then you need to make sure the machine is properly balanced and not leaning too much to the back.

Also the drum suspension rods do tend to wear out over time and loose their firmness, causing the drum to sway excessively. You can check this by opening the lid. Pushing down and from side to side onto the agitator, and seeing if their is a firm bound on the drum. Also making sure the drum returns to centre position. If the suspension springs feel loose and wayward, then they will need replacement.

Regards
Ash

Nov 08, 2009 | Washing Machines

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...