Question about Washing Machines

2 Answers

Miele rinse light keeps flashing

When you start it on a normal wash the machine fills then sounds like the water is draining out of the machine, then the rinse light flashes and the machine stops. I have tried it on different cycles, but still the same thing. Cleaned all the drains and drained the water out of the machine

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 52 Answers

This is a motor related fault , check motor brushes , but it could well be either the motor or pcb ( both very expensive)

Posted on Sep 20, 2017

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 975 Answers

Did you check the DRAIN PUMP MOTOR ? IT COULD BE CLOGGED or something blocking the impellers

Posted on Apr 19, 2008

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: washing machine won't spin and drain

the drain pump is not working,after wash cycle the washer should drain the used water,if it does not function-all the next cycle will not commence.

Posted on Mar 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a W526 and the machine fills water then drains, fills, drains....timer not counting down and fills water very high when rinsing


Sound like a problem with the pressure switch or hose. Some models and switchbbuilt-in to to main board

Nov 02, 2015 | Miele Washing Machines

1 Answer

Water keeps filling up the drum and inlet light flashes


either the inlet water valve is bad and needs to be replaced or the controller for it is not cutting off the electricty to it, If you are going to replace something, replace the water inlet solenoid valve.

Feb 10, 2014 | Miele Washing Machines

1 Answer

Rinse light flashes on miele w828


1) the water must be preheated, test the heating element if is defective
2)drain line is clogged proceed to fix it see the diagram
3)some sock must be removed, use plier
4)pump defective, inside with the propeler, replace
5)frozen pulley pump, replace
6)improve the drain, if about 4 inches cut of the diference.
b) if lower , install air/gap siphon break assembly.

God bless you
6_25_2012_11_20_13_am.gif

Jun 25, 2012 | Miele Novotronic Premier 500 Front Load...

1 Answer

Miele W1926 check inlet light flashes at he end of rinse fill


Hi Yugin.That indicates your machines water inlet valve is faulty.(Means it's taking less water then normal)Please check this steps & do it fast before water inlet is finishes:1-Turn your machine on & run empty with pre-wash cycle first.2-Please ajar the detergent drawer & check runing water on compartment one 3-Please press pre-wash button & compare the running water volume on compartment two.If the running water volume 1 is less then 2 or vs.water valve needs to be replace.That's causing problem.I hope that helps.Thanks.

Jul 26, 2010 | Miele W1926A Front Load Washer

3 Answers

I have a Miele W1918 washer which has worked perfectly for a decade. Now there is not enough water to fill the tub during the first 'rinse' phase of normal cycles or the 'separate rinse' cycle. The machine...


I have exactly the same problem. I am currently getting around the issue by letting the machine do the washing then at the end of that cycle do a manual rinse cycle.

Jun 04, 2010 | Miele Novotronic W1918A Front Load Washer

2 Answers

Wash motor does not run: Inlet/Drain error


Wordhog: Does sound like a siezed wash pump to me. Wash motor needs to run to get the correct level of water.

To drain a Miele dishwasher, start the machine on a cycle. All the Miele range of dishwashers drain before filling. Then hold in the start button until the end/finish light is lit. Keep doing this until all the water has gone. You could just get a jug and bail it out. Once the jug does not do the job anymore, switch to a cup, I use a very large syringe for the remaining half a litre.

Oct 28, 2007 | Miele 24 in. G646SC Plus Free-Standing...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Brad Brown

Level 3 Expert

16231 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...