Question about Logitech QuickCam Orbit AF Webcam

2 Answers

No camera detected on this computer

Keep getting message in windows lifecam, no camera connected to this computer. the camera wont capture vidio

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 202 Answers

First go to Control Panel, Hardware, Devices and look for your webcam. Go through the tabs to make sure it is Enabled. If you do not see the webcam in the list, right click on the white space and select Show disabled devices. If you still don't see your webcam then you will need to reload the software drivers, either from disc or this link on the Logitech website. Once you think you have it working you may want to reboot your computer, and then try the free webcam test tool.

Posted on Jul 08, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Logitech Master
  • 10,322 Answers

1st You download Webcam Driver.
camera driver After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Logitech Camera Drivers for Windows XP Vista Windows 7

Posted on Jan 30, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can i install my web cam?


Hi,If you don't have CD for installation, Use the below link to download it.

(microsoft.com/hardware/download/download.aspx?category=ICE)

Set Up and Use the VX-3000 personal web camera
  • 1 Install the software using the included CD and plug the LifeCam into a free USB port. For desktop use, place the LifeCam on a clear spot on your desk that's free of other objects, including cables. The camera should not be more than an arm's length away from you. For LCD (or similar object) use, push the center part of the camera's base upward, place the camera on the LCD and close the base around the monitor to secure it.
  • 2 Open the device software by clicking the Microsoft LifeCam icon on your Windows desktop. If no such icon exists on your Windows desktop, click "Start," click "All Programs" and locate the Microsoft LifeCam program in the list of programs there. After launching the LifeCam program, look at the image that appears. If necessary, adjust the camera to more precisely reflect your appearance. For best results, try to center the camera image on your head and shoulders.
  • 3 Click the video camera icon on the bottom panel of the LifeCam program to begin video capture. Video will begin recording, and you will see a "Recording Video" message beneath the live video image. To stop recording, press the same icon (the icon will have a red square with a blue background during recording).
  • 4 To begin audio capture, click the microphone icon on the bottom panel. To stop the audio recording, click the same icon (again, it will have a red square with a blue background during recording). To snap a photo, click the camera icon on the bottom panel.
  • 5 Access any of your captured video, audio or image files by clicking the folder on the bottom panel. The VX-3000 also provides the ability to edit video or image files using supported software. After snapping a photo or capturing video, click the "Edit" icon that appears beneath the thumbnail of the captured content.



  • Hope it helps.

    Oct 30, 2010 | Microsoft LifeCam VX-3000 Web Camera

    2 Answers

    I dont know how to install my new lifecam !


    Set Up and Use the VX-3000 personal web camera
  • 1 Install the software using the included CD and plug the LifeCam into a free USB port. For desktop use, place the LifeCam on a clear spot on your desk that's free of other objects, including cables. The camera should not be more than an arm's length away from you. For LCD (or similar object) use, push the center part of the camera's base upward, place the camera on the LCD and close the base around the monitor to secure it.
  • 2 Open the device software by clicking the Microsoft LifeCam icon on your Windows desktop. If no such icon exists on your Windows desktop, click "Start," click "All Programs" and locate the Microsoft LifeCam program in the list of programs there. After launching the LifeCam program, look at the image that appears. If necessary, adjust the camera to more precisely reflect your appearance. For best results, try to center the camera image on your head and shoulders.
  • 3 Click the video camera icon on the bottom panel of the LifeCam program to begin video capture. Video will begin recording, and you will see a "Recording Video" message beneath the live video image. To stop recording, press the same icon (the icon will have a red square with a blue background during recording).
  • 4 To begin audio capture, click the microphone icon on the bottom panel. To stop the audio recording, click the same icon (again, it will have a red square with a blue background during recording). To snap a photo, click the camera icon on the bottom panel.
  • 5 Access any of your captured video, audio or image files by clicking the folder on the bottom panel. The VX-3000 also provides the ability to edit video or image files using supported software. After snapping a photo or capturing video, click the "Edit" icon that appears beneath the thumbnail of the captured content.



  • Oct 09, 2010 | Microsoft LifeCam VX-3000 Web Camera

    1 Answer

    I get the ox8ac70013 message every time i make a vidio call


    After downloading and installing a messenger (http://www.soft32.com/download_30.html ) set it up as follows:
    1. Go to Messenger at the top left and click on it.
    2. Next go down to Preferences and click on it.
    3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
    4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
    Hope this helps

    Dec 29, 2009 | Microsoft LifeCam VX-3000 Web Camera

    1 Answer

    Lifecam 600 wont install


    Checkout Microsoft support - you can also download the software from here
    http://support.microsoft.com/search/default.aspx?query=lifecam+vx-6000+driver&catalog=LCID%3D2057&mode=r

    I could not see a lifecam 600 only Lifecam NX-6000 and Lifecam VX-6000

    Aug 31, 2009 | Microsoft LifeCam VX-6000 Webcam

    1 Answer

    How do I capture vidio to my conputer


    You will need a capture card and a video editing program on your Windows machine, and what is known as a firewire input. Macs from the G3 upward have a firewire input built in. Macs come with I-Video program which offers log and capture and editing capability. Connect one end of he firewire cord to the camera computer output and the other to the computer. Select the log and capture option in the software and transfer video. You will need lots of hard drive space to store your video, about 10 gigs per hour. You will also need a way to burn your video to DVD if you wish to save it and view it. Some people just upload their video to YouTube, which will only accept video of nine minutes in length or less. While it may seem simple, there are a lot of techniques you will need to learn to capture, edit and output video. You will need to experiment a lo before you learn all the tricks and variations in this process/.

    Dec 01, 2008 | Canon HV20 HDV Digital Camcorder

    1 Answer

    Connecting Camcorder to PC


    Windows Movie Maker won't detect the camera but Video Edit Magic should.

    Aug 29, 2008 | Sony Handycam DCR-PC110E Mini DV Digital...

    1 Answer

    PV GS39 Win XP Movie Maker


    I don't know if Windows XP Movie Maker can detect a firewire based video camera.

    Do you have DVD burning software such as Nero in your computer? That has capture capability to it.

    Pinnacle Studio will detect a firewire camera. It is reasonably priced and easy to use. In fact you can control your camcorder from Studio in case you need to rewind or fast forward the tape.

    May 14, 2008 | Panasonic PV-GS39 Mini DV Digital...

    1 Answer

    I have problem


    i have the same.
    no video, i only hear the sound.
    during scan, active channels are detected.
    need help.

    Apr 25, 2008 | Philips SAA7130 TV Tuner/FM Radio/Video...

    2 Answers

    Software won't work with vista


    Uninstall Windows Vista. Do a fresh install of Windows XP Professional Sp2. Download XP drivers and install camera. Many software programs have trouble initializing in Windows Vista. Good luck!

    Oct 12, 2007 | Microsoft LifeCam VX-6000 Webcam

    Not finding what you are looking for?
    Logitech QuickCam Orbit AF Webcam Logo

    282 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Logitech Computers & Internet Experts

    micky dee

    Level 3 Expert

    2844 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18402 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...