Question about Frigidaire PLES389D Electric Kitchen Range

1 Answer

Frigidaire PLES3890 the oven won't come on and F13 ERR flashes.

Posted by on

  • tumbleweeds Jun 26, 2008

    Oven was 6 months old the first time I had an F13 error code. The oven does not work at all, but the cooktop does. It took exactly one month to be fixed the first time (March 08), in the middle of dinner, I might add. Second time it took two weeks (May 08), during a graduation BBQ party. Third time it went out was about 2 and a half hours ago (June 25,08), again, during dinner.



    The sensor was replaced the first time, the second time the mother board was replaced. I will let you know what comes next.....besides a hammer!

  • willis harris Dec 31, 2008

    Thanksgiving day 2008 , while the turkey was in the oven.The stove just died nothing will turn on. I have checked the fuse box. does any one know where the service access panel is on this stove?

×

1 Answer

I wouldnt buy one of these products again never!!!!

Posted on Aug 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flashing fault code F13


Check your oven sensor is what I would do. See if it reads 1100 ohms at room temp. If it is open or shorted it is bad.

Dec 26, 2013 | Frigidaire Gallery 30" Self-Cleaning...

1 Answer

Frigidaire es300 gas range kepps flashing f10 and f13.how to resetand get the clock working


Hello Carol Martin - Typically, error codes F10 and F13 could indicate a variety of issues. The range could possibly have a shorted keypad, runaway temperature (higher than normal temperature), faulty EOC (electronic oven control) or, display wire harness missing/not connected. Try resetting the range by unplugging it or flipping the household circuit breaker off. This usually clears most false error codes. Wait approximately ten minutes and if the error code does not clear, I would recommend contacting a professional to proceed further. Most likely the EOC on the range will need replacing.

Mar 06, 2013 | Frigidaire Gallery GLEFZ384GC Kitchen...

1 Answer

I have a Frigidaire Elements stove. When I went to preheat the oven I got a constant 'beep' and a code, F13 ERR. Please help Thank-you Anxious in Indy


Hi akadiki,

This error code F13 description is a bad Clock ERC. The steps below will help you determine whether the ERC or touchpad is defective.

Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician.

1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.

2. Gain access inside the control panel.

3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.

4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.

5. Turn the power back on.

6. Wait for at least one hour to see if the F13 code comes back (usually accompanied by a beeping sound).

7. If F13 comes back, replace the ERC. If it does not, replace the touch pad.

Hope it helps.

Thank you for using FixYa.

Sep 15, 2011 | Kitchen Ranges

2 Answers

What does F13 Error mean?


Hello,

Here is what the F-13 error code means and the fix for it.

F13 Internal CPU checksum errors 1. Disconnect power for 1 minute.
2. Reconnect power.
3. If failure remains, replace the touch control module

So it says the main computer control had detected a error in the touchpad control

I hope this helps,

Gene

Aug 01, 2011 | Kitchen Ranges

1 Answer

I get a error f13 when i turn on broiler


http://www.appliancepartspros.com/repairtips/repairtips_appliance+fault+codes.aspx
Above are the codes and meanings.
The "F13" error code means "Bad EEPROM identification/Checksum error".

If reseting the power does not help then according to Frigidaire suggested corrective action the electronic oven control (aka EOC) has to be replaced.

- The part number for the EOC is AP3874704


Dec 13, 2010 | Frigidaire Kitchen Ranges

1 Answer

How to fix the F13 error in this stove


F11, 12 & 13) Disconnect power, wait 30 seconds and reapply
power. If fault returns upon power-up, replace EOC.

Apr 15, 2010 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

Getting F13 err code when trying to bake or broil. Frigidare model PLES399EC


Hi william_j522,

the F13 error is related to the clock. this error can occur when the clock looses communication between the keypad or any of the sensor in the stove, including the heat probe. sometimes resetting the power will fix the problem.

try disconnecting power to the stove completely and flip the corresponding breaker on and off on the breaker box. 
wait 30 seconds and than turn everything back on.
if the problem returns after power-up, replace the clock.

Regards
R.K.

Oct 22, 2009 | Frigidaire PLES399EC Electric Kitchen...

1 Answer

When turning on oven it says f3 or f13 err and i can erase it


All F3-E Codes - Oven Temperature Sensor (RTD) or Warming Drawer Defect - Replace oven temperature sensor (RTD).


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 06, 2009 | Electrolux Kenmore 30 in. Gas Freestanding...

1 Answer

Receiving Error F13


Turn the breaker to the stove off for one minute, reset time and everything should work just fine. It worked for me.
Ken

Jan 08, 2009 | Frigidaire PLCS389DC Dual Fuel (Electric...

Not finding what you are looking for?
Frigidaire PLES389D Electric Kitchen Range Logo

Related Topics:

691 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...