Question about Washing Machines

1 Answer

I have a Hoover vhd sensor Dry Washer Dryer and its come up with error E11. Can you help ?

Posted by Anonymous on

  • Anonymous Mar 14, 2014

    Hoover sensor dry Dynamics error

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi I had the same problem about once a week and every time it happened I had to turn off the washer off and leave for a while and start new wash cycle. It worked for a while but eventually it started to throw E11 once I put it on (not the middle of cycle it used to do). I had to result to call the repair man. He checked all the hardware and nothing was wrong and re-install the program on the board and it stopped throwing errors. After 4 month of problem free period, it gave me E11 again today though..

Posted on Oct 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a hoover vhd 9163zd with error code E05,what component does it refer to being at fault,where is the component located


Error Code 05 is a NTC fault, either open circuit or shorted.
If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out of range, the "E05" error code will be displayed.

Possible Causes / Procedure:
1. Unplug washer or disconnect power.
2. Check the water temperature sensor. Check connections to the water temperature sensor.
3. Check resistance of heating element, if present on this model. (abnormal = infinity).

Replace failed component. It could be the sensor or the temperature control module (NTC module).

Good luck.

Apr 20, 2015 | Hoover Washing Machines

1 Answer

Hoover VHD sensor Dry shows Eo8 vibrate badly and stops any suggestions please regards Peter


http://www.ukwhitegoods.co.uk/help/fix-it-yourself/specific-faults/3070-hoover-vision-hd-washing-machine-fault-codes.pdf

Mar 09, 2015 | Hoover Washing Machines

1 Answer

What is error code F11 ?


An E11 error code indicated there's an open circuit on the dryer heater or a module issue it's a good idea to check the wiring from the sensor on the top the drum to the circuit board as this can become damaged during the spin cycle.

Nov 24, 2014 | Hoover Optima 7 OPH716DF White 600 mm...

1 Answer

M frigidaire washer model gltf2940fs1 shows me a e11 code


Thanks for your post, friend!

From my understanding your Frigidaire frontload washer, GLTF2940FS1, is displaying an "E11" error code. Typically, "E11" stands for fill time too long which means you could have an issue within your pressure sensor or control board. I would recommend a reset on your washer and that can be done by flipping the household circuit breaker off for ten minutes. If that does not help correct the issue you may want to consult with a technician for proper diagnosis. I hope this is helpful. -Matt

Oct 15, 2014 | Frigidaire GLTF2940ES Front Load Washer

4 Answers

ERROR CODE H02 ON MY HOOVER SENSOR DRY WASHER DRYER WD9616C


Hi I have the error code ho2 on my Hoover wash machine does any one no what it means
2_17_2016_8_33_25_am.jpeg

Oct 21, 2012 | Washing Machines

1 Answer

Display reads E11


E11 error code means that the dryer thermostat is faulty.

Apparently it overheats if you use it too much or the motor of the fan (blowing hot air in the tumble) got stuck.

Check it and keep us updated.

Apr 18, 2011 | Hoover Washing Machines

2 Answers

Hoover washer/dryer VHW854D SHOWS ERROR CODE E11. Machine switched off and door opened. Wash cycle had not started. Door closed and machine switched on and all works OK. Any ideas?


I have exactly the same problem. Hoover Service Centre told me to tip a bucket of warm water into the drum and leave for 5 minutes before switching it back on. The idea is that the machine may be affected by the cold weather. Needless to say it made no difference and Error 11 remains - I am expecting an engineer on Thursday 23 I'll keep you posted on the outcome.

Dec 20, 2010 | Washing Machines

2 Answers

Error code E11 on hoover washer dryer vhw854d


Error code E11 is a dryer thermostat problem. The wiring, by design, is too short, and secured too tightly up and behind the digital display, and extends to a connector located on the machine's drum housing. When the machine is in motion, and there is a degree of drum movement back and forth, left to right, the wire disconnects resulting in Error code E11. Your issue may be that the wire is loose, and not fully disconnected (yet) hence the fault being intermittent. Error code E11 requires a service engineer to reattach the thermostat wiring in a way that allows for the drum housing to move, as per it's design, without the wire being disconnected from the drum housing connector, when the wash load becomes unbalanced during the wash cycle.

Nov 12, 2010 | Hoover Washing Machines

2 Answers

My hoover washier dryer has stopped heating up. I works ok as a washing machine but the tumble dryier doesnt heat up. It is a hoover vhw654d washier dryier


on all dryers you have a hi and a low relay as well as the heater and in some you even have a run tstat check that you have continuity on each side of each of your relays as well as your heater any of these pieces that does not have continuity would be the one that u wuld replace hope this helps if you are not electrically inclined plz call a technician

Jul 21, 2010 | Hoover Dryers

1 Answer

My hoover washer dryer VHD is showing a fault E11 and the washing in the machine is still wet


It means there is a problem with the dryer board on it.You can try removing
the lid and just check the dryer control board on it.Make sure the
connections are ok and that none of the wires are broken.Then if the wires are ok the dryer control board will need to be replaced.

Apr 10, 2010 | Candy Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

3,385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...