Question about Optoma HD65 DLP Projector

2 Answers

Optoma hd65 doesn't turn on

The same problem i have was posted in your site on March16 2010 but couldn't find a solution to it:
(as posted in your site)
I have exactly the same problem with my Optoma HD65. When I turn it on the fan starts but the bulb does not light up. The fan goes through a couple of high speed/low speed cycles and then stops and the red bulb light comes on.

I thought it was the bulb the first time it happened but after letting it sit for a while powered off it started again. The next time I went to use it though it wouldn't start and it hasn't started since


Any suggestion?
Thank you

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I've had the exact same problem with no good solution. New bulb, same problem. If I let it set plugged in overnight it sometimes works. But I think we all know it's an Optoma design flaw. My unit is only two months old and I'm sending this piece of **** back.

Posted on Jul 28, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same for me and a few other people on this site **** from Optoma!!

Posted on Jul 24, 2010

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

webkruzer1
  • 17 Answers

SOURCE: My Optoma HD65 Projector stops starts working and

Possible cause is overheating.
Do you hear the fan working?
What happens when you use the lowest level light output?
Does it run longer?

Also possible cause is a faulty temp sensor.
AC wire connection may not be firmly pressed in socket.

Posted on Apr 09, 2009

  • 103 Answers

SOURCE: need to somehow hook up speakers to hd65 optoma.

HI there the normal way to sort this problem in most installations is to run active speakers straight from the sound card on the pc /laptop that is running your presentation and nothing to do with the projector

skytec make a good range of quality active speaker available on the net

Posted on Jun 04, 2009

projdoc
  • 2236 Answers

SOURCE: new beamer optoma hd65,message: no source found

adjust the resolution to match. also, make sure the monitor port is activated.

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Post Test card reads 43 what does it mean?


when was it manufactured . it has possibly went past it's life expectancy

Mar 01, 2017 | StarTech.com PCI Post Diagnostics Test...

1 Answer

I just bought a brand new Ryobi saw from a neighbor but he couldn't find the manual. TS1141L 7 1/4" miter saw how do i get one?


Try this site. http://powertool.manualsonline.com/manuals/mfg/ryobi/ts1341.html I could not find your exact model. If this is not close to what you have then there are many other models to chose from. Just click on "ryobi saw" above the manual to see the rest of the models. You should find something very similiar. Thanks and please rate.

Sep 05, 2011 | Ryobi 10 In Miter Saw With Laser

2 Answers

If this site says JUICER MANUAL, why am I seeing microwaves? \r\n If you can't run a site, how can we expect accurate directions and maunuals? Shame on you...


I don't know what your looking for but it appears your first post was you simply complaining. First off you haven't stated a brand or model for the juicer you are looking for, which would be very helpful in someone else finding something for you that you couldn't find.If you would like your manual found please post the right information and someone will try and find it for you.

Aug 31, 2011 | Juicers

1 Answer

What is the correct gas/oil mixture for a Poulin chain saw model #2800?


Hi there,http://lawnandgarden.manualsonline.com/support/poulan/chainsaw/user-or-service-manual-1285532
If this is an older saw here is a site that said the oil mix is on the tag.I couldn't find your exact model.

    I always add this for your information. If this is not the solution that you are looking for please re post because when we pick a question to answer FixYa takes it out of the questions.

 Thank you for choosing FixYa.com.  

May 22, 2011 | Garden

1 Answer

I need Epox 8RDA3I manual


Note: This was a difficult manual to find. I couldn't find the exact model's user guide but I did find one in the same series. Download it and see if it will work for you.

Follow this link for the Epox 8RDA manual: http://files.aoaforums.com/I1474-8rda%20manual.pdf.html

Click on "Click Here To Download This File from server cluster #3" to download file.

Good luck, please post back to this solution if you have any difficulties, and thanks for using FixYa.

May 12, 2011 | EPoX EP-8RDA3I Motherboard

1 Answer

I have lost my instruction manual for the filter set up on my Intex Summer Escapes easy set 8' pool. Is there a site i can go to to review filter set up. Everything else is super easy. I just want to...


I couldn't find an exact guide online, but this site has a lot of resources that may be able to help you out. Good luck!

http://www.ehow.com/pool-filter-instructions/

May 06, 2011 | Computers & Internet

1 Answer

ACER ASPIRE 9302 WSMi erased programs,cannot use eRecovery


Click on Start choose Run and type in the box msconfig go to Startup tab un-tick the e-Recovery monitor

Feb 19, 2008 | Acer Aspire 9300 Notebook

1 Answer

Manual


Da-ta, __I hope you're just looking for user settings and such because like you I couldn?t find the entire manual anywhere. I did, however, find the board layout, ID and user settings reference. The document is a 6 page pdf, unfortunately I can't post pdfs and my conversion utility wants to make one jpg per page. Make sure you download each of the 6 jpg images for all of your data. Good luck and please don?t forget to rate the posting.

Jan 27, 2007 | Chaintech Slot 1 CT-6BTM Motherboard

Not finding what you are looking for?
Optoma HD65 DLP Projector Logo

841 people viewed this question

Ask a Question

Usually answered in minutes!

Top Optoma Office Equipment & Supplies Experts

color wheel light...
color wheel light...

Level 2 Expert

138 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73635 Answers

Are you an Optoma Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...