Question about Toshiba Satellite P35-S611 Notebook

1 Answer

My P35 S-611 not show VGA video

I made much sets to try to resolve, but nothing.
1 - reinstall video driver
2 - install driver controller, to show where video device is on
3 - Set FN+F5 to change, the monitor device selected appear, but monitor not show video. Tried in others monitors, till LCD WXGA, but nothing.
4- I tried to set the control panel, turn on the CRT monitor too.

The internal LCD and Svideo output show video normally.

Posted by on

  • italovalerio Apr 27, 2008

    Thank you very much, i forget to write details about tests in others monitors. Yes i made this too. I tried others monitors with 17" CRT, model new, till LCD 22". But till when note start, in DOS / text mode not appear, i set to simultaneos output in bios setup, but not appear too.

    I believe witch the problem is on hardware. I don´t know if i try reset bios something happen.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 94 Answers

Check the refresh rate of the LCD, may be too high. Try at 60hz first.

Set the display to 1024x768 or 800x600 then go higher... allowing it to revert back to previous mode if nothing shows.
(some/most CRT monitors cannot display widescreen format)

Set at 60hz using a CRT (you will see flicker on CRT) - then switch to LCD

Posted on Apr 27, 2008

  • Evan Mayo
    Evan Mayo Apr 28, 2008

    in BIOS you should be able to reset to Factory Default. Or leave the CMOS battery out overnight. Then plug back in in the morning. That too will clear the CMOS on that model.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My laptop shows that its on but the screen is blank no light


First you have to check your memory first, if you have an extra memory or RAM replace it then try to turn it on. If its still the same no display, try to plug the CRT,LCD or LED monitor to your VGA port commonly on the side of the laptop, as shown below by pressing the FN key and the F5 button to switch the monitor to CRT,LCD or LED monitor. After you tried these procedures and still doesn't change at all. You have to bring your computer to a computer or to the service center of Acer. Because they have to repair your motherbaord, like replacing some of the capacitor on your cpu bridge area or reheat your south or north-bridge circuit.859bbf9a-e2c8-4160-9edd-6c0287f402da.jpg 9c95ede9-6d28-45e5-956f-3a4720027c7f.jpg

Jul 07, 2014 | Acer Aspire E1-510-28204G50Dnsk 15.6 LED...

1 Answer

There is no sound coming from my lap do i fix this....


Good day, In regards to your problem you try this steps to check if this will resolve your problem

1. Make sure that the volume is not set to low
2. check if the driver or your audio controller is detected by going to device manager
> click start
> go to control panel
> choose device manager
> click sound,video and game controller
> check if conexant if installed

3. if conexant is not installed you need to have the driver reinstalled
driver is on this link if in case you dont have it

4. Then restart your pc after the installation to finalized it
5. check if your laptop's audio is working

Hope this will resolve your issue. You can also check a local computertech for assistance if the problem still exist. Have a great day and thanks for visiting Fixya.

May 21, 2011 | Conexant Systems Multimedia Audio...

1 Answer

Hello. I have recently bought An Acer Aspire 5742G Notebook and I am having troubles installing the drivers from the CD which came with the Laptop. It keep popping up with VGA Video card and The Nvidia...

Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers on the home page you should see the download software finder under that there will be a list platform, category sub category price from the category drop down list select drivers then from the price drop down list select free or which ever applies to your need
This package consists of SiS VGA Drivers, AGP Drivers, VGA Utilities, and Installation for Windows 7. Utilities include Control Center and SiStray. The Control Center provide some settings like gamma correction, video, TV output, driver mode, screen rotate, and product information. The SiStray provide Control Center entery and some settings like resolution, refresh rate,and rotation. The Installation are capable of installing/uninstalling drivers and utilities respectively.
Supported Chipsets:
SiS671, SiS672, SiS671FX, SiS672FX, SiSM671, SiSM671MX, SiSM672, SiSM672MX hope this helps on the home page you should see the download software finder under that there will be a list platform, category sub category price from the category drop down list select drivers then from the price drop down list select free or which ever applies to your need hope this helps

Apr 19, 2011 | Acer Computers & Internet

1 Answer

No video output from atapi dvd rw after OS reinstall, cd rw ok

>> VGA controller (vga compatible) error in the device manager

Windows has not found a "good" device-driver for the "integrated" video-controller on your motherboard; it is using the "generic" adapter.

So, trying to download the "SIS Mirage Graphics" software is an attempt by Windows to download a "specific" device-driver that matches your video-adapter hardware.

You might try installing an add-in video-card, to see if Windows will install the correct device-driver, and still boot-up correctly.

Otherwise, take the computer to a qualified technician, for trouble-shooting about your boot-up problem.

Mar 03, 2010 | Computers & Internet

1 Answer

Video controller (vga compatible) driver problem

You require internet or the motherboard Cd to instal it.. just inset the motherboard cd and run the driver for the video. I think your problem will be solved

May 06, 2009 | Computers & Internet

1 Answer

Missing drivers for compaq presario v2000 machine would be a good starting point. Compaq is manufatured by HP. There should be a support/downloads page on the website

Apr 19, 2009 | Computers & Internet

1 Answer

There is no sound drivers are installed and all text is shaded

This is the software issue. Need to install the appropriate software to reslove this issue.
1.Ethernet controler - Need to install the chipset driver and the Lan driver
2.Pci bus device - Chipset driver
3. sm bus controller - After installation of the Chipset driver - Right click on the sm bus controller and update the driver - select install from specific location - i will chose the location- Select the model and hardware type as thermal sensor
next - follow the instruction.
4. video controller - Need to install the VGA or Display driver
5. video controller (vga compatiable) - Need to install the VGA or Display driver

With regards

Apr 12, 2009 | Computers & Internet

1 Answer

Driver probem

the smbus controller holds the driver for ur audio device so first try to set the smbus controller driver
if it again shows a ? mark in device driver nothing happenns just make a forced installation of ur audio driver

Mar 18, 2009 | Compaq Presario 700 470024-192 Notebook

1 Answer

The appearance of the windows settings is not clear. as if the video driver is uninstall

this above mentioned problem causes

1. u can not set proper screen resloution (1020 * 800)

2. vga (video graphic adaptor ) driver not installed

solution :-

1. press windows icon key on the keyboard

2. select run programm

3. to type devmgmt.msc on the run programm

4. device mangager will open

5. in display adapater :-check any exclaim or question mark if it found drive or vga card not properly install

install vga card driver again

Mar 09, 2009 | Acer Computers & Internet

1 Answer

No Ethernet controller on Optiplex XP Pro SP3

Hey evolution200.
Heres the installer file for your Broadcom Ethernet Controller:
Get back to me and let me know if that worked out for you.

Feb 03, 2009 | Dell OptiPlex GX280 PC Desktop

Not finding what you are looking for?
Toshiba Satellite P35-S611 Notebook Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18415 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides