Question about Broksonic TV

1 Answer

I can't get my dish system to work with this TV. I'm only getting 2 chanels. How do I program new chanels to this TV? I need chanel 60.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Broksonic Master
  • 5,099 Answers

It depends on the TV a bit. Which model of Broksonic TV do you have? Do you have the original remote? (remotes.com has replacement remotes for many TVs.) Look at the TV (or the original remote) for a menu or channel add subtract option. (The TV is probably programmed to skip the channels that didn't have a signal in the past so you need to reprogram this.) If the TV is a really simple TV (with just the channel and volume controls on the TV), you'll need the original or a direct substitute remote (or a higher end programmable remote). Most basic universal remotes will control power, channel and volume but not the reprogram channels option (in my experience). If you can program the add/remove channels, press 60 on the remote, wait for the TV to go to that channel and then press the Add Channel button. Alternately, with the satellite receiver on, press the combination to search all channels and program the skip to channels with signal.

I hope this helps.

Cindy Wells
(I had a really old Emerson TV; when the original remote started to fail, the cheap universal remote didn't handle the channel programming. Fortunately, the original remote would usually still work for that.)

Posted on Jul 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own an Emerson 37inch tv modelnumber EWL3706 AND SERIAL NUMBER J33615468 LAST NITE THE VOLUME WAS AT 26 AND ALL BY ITS SELF WENT TO 60 IT WONT GO DOWN NOT WITH REMOTE OR ON TV ITSELF I UNPLUGED IT AND...


Hello! Your tv controls the volume if it jumps up to 60 after moving down it may be interference with the TV's remote sensor. Has anything changed i.e. new lighting ? Try calling Emerson at: 8002562487


Daniel Busa
DISH Network Customer Service

Jan 14, 2011 | Emerson LC320EM9 32 in. LCD HDTV

1 Answer

We move the tv from living room to bed room and we have to change the chanel from 3 to 60 to get the tv to work on dish network, we try to change from 3 to 60 we try evereything whit no result, we call...


Rescan all the channels?Hook the tv and the satalite signal cable in the tv and dish network box correctly check?Go to tv menu.Goto SETUP,pick CH. pick option CABLE enter to rescan all channels.This should have all the channels,belong to the package u order.

Sep 04, 2010 | Televison & Video

1 Answer

My 60'' LXI slimview television will only save one chanel.


If you have remote control for the channels on your set, try to push menu then choose "memorize channel" or choose "cable" then do the channel memory.
Thanks.

Aug 16, 2009 | Televison & Video

1 Answer

Need to have tv on chan. 73, for dish access


When I had Dish hooked up I had to use chanel 3 on my television or the video inputs. The Dish box will take care of all the stations that yor receive. You shouldn't have to change chanels with your tv.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

May 04, 2009 | GE 19GT317 19" TV

3 Answers

Soney 32" flat screen tv. 2006


Try going into the television, and changing the audio setting to stereo, it sounds like it set to SAP (second audio program).

Feb 10, 2008 | Televison & Video

2 Answers

Indian chanels


this is not so easy to do.you have to read a lot to become familar with the terminology involved.you can start by googling fta on the internet.through some of the sites you will get the information you seek.or you can point dish to the various satellites and test the signals to see if you get what you are looking for.

Jan 07, 2008 | Televison & Video

1 Answer

Chanel will not go up or down.


George, your tv`s tuning system is set to "air", (roof top antenna) you need to go into your menu and change it to "cable", then do "autoprogram" again and it will add the channels above 13. You really should order the original remote for yourself, you can probably get one here; www.partstore.com Good Luck and Happy Holidays

Dec 04, 2007 | Toshiba 20AF41 20" TV

2 Answers

Tv channels


Probably, at first you searched the programs in automatic way. And there were only 20 channels at that time. So, you only have 20 channels. You should try to search channel 21, 22, 23, etc, manually. If you can't set 21 on your program, then your tv set has only 20 programs.

Nov 11, 2007 | Samsung CXJ1352 13 in. TV/VCR Combo

Not finding what you are looking for?
Broksonic TV Logo

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Broksonic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Cindy Wells

Level 3 Expert

5097 Answers

Are you a Broksonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...