Question about Panasonic Cell Phones

2 Answers

I NEED TO RESET MY ANSWERING MACHINE VOICE MESSAGE CANT SET THE ONE TOUCH DIALING AS PER THE MANUAL INSTRUCTIONS NEED TO REDUCE THE VOLUME ON ONE OF THE LINES ON EACH OF THE PHONES

Posted by on

  • g breton Jul 07, 2010

    the answer I got for my panasonic KX-T7633 house system phone did not work.Unplugging it & replugging it did nothing. I would not be asking how to redo the answering message if I had a users manual. I have the quick reference guide & it does not tell me how to reset the answering message.my other questions were: how to reduce the volume on one of the phone lines @ each phone & how to reset the speed dial( i need to add the area code) I went to the quick reference guide & that does not work.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 677 Answers

From answering your telephone when you are busy or away, to broadcasting a generic message to callers, an answering machine is a key part of your homeI NEED TO RESET MY - mag-glass_10x10.gif or office phone system. When the device is working properly, it not only records and playbacks messages, but also informs you of the date and time of the call. If your answering machine is not recording messages, displaying an error code or is presenting another problem, you can reset the device and restore it to a working state.

Turn the answering machine over so the bottom of the device is facing you. Locate the machine's battery door, if the device is equipped with a battery backup. If the device is not equipped with a battery backup, skip to step 3.

Remove the answering machine's battery from the bottom of the device.
Unplug the answering machine's power cord. Leave the power cord unplugged or one minute.
Plug in the device's power cord. The answering machine is now reset.
Reinstall the answering machine's battery, if required.

Reset the answering machine's clock, if equipped. Then, record your new message. Refer to the instructions in the user's manual, if necessary.

Tips & Warnings

  • Reset the answering machine whenever a power failure occurs or the device is experiencing problems.








Posted on Jul 07, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 821 Answers

Hello,please kindly follow the steps below,

  1. Turn the answering machine over so the bottom of the device is facing you. Locate the machine's battery door, if the device is equipped with a battery backup. If the device is not equipped with a battery backup, skip to step 3.
  2. Step 2 Remove the answering machine's battery from the bottom of the device.
  3. Step 3 Unplug the answering machine's power cord. Leave the power cord unplugged or one minute.
  4. Step 4 Plug in the device's power cord. The answering machine is now reset.
  5. Step 5 Reinstall the answering machine's battery, if required.
  6. Step 6 Reset the answering machine's clock, if equipped. Then, record your new message. Refer to the instructions in the user's manual, if necessary.
wish you good luck,

take care.

Posted on Jul 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set up voice mail for my uniden 6.0 without answering system


If you do not have an answering system (answering machine) on the phone, you need to purchase a answering machine or contact your telephone service provider to get Voice Mail service from them. (Most charge $3-5 per month for voice mail.) The provider will tell you what number to call to set up a voice mail message and access messages.

I hope this helps.

Cindy Wells
(for most Uniden systems with the answering system, you need to turn it on and then access the system from the handset to set the out-going message and length of incoming messages allowed.)

Mar 18, 2013 | Uniden DECT 6.0 Cordless Telephone...

2 Answers

The new phone I just purchased doesn't have an instruction manual in the box. How do I record a voice mail message?(Emerson Digital Cordless Telephone and Answering System EM6113BK)


First turn on the answering machine function by pressing Answer On/Off on the base. To record the out-going message, press and hold Answer On/Off. Then press and hold Announce (rewind) until you hear a short beep. Speak your message and press Answer On/Off to stop recording. The new ogm will be played back. (see page nine of the manual)

If you are dialing in from a touch-tone phone, press * to skip your Outgoing message. Enter your PIN (000 with the out-of-the factory settings). Then press 9 and then 5 to start recording and 6 to stop recording.

The manuals for many Emerson phones are here: http://southerntelecom.com/emersonsupport/emerson_telephones.html . The direct link is http://southerntelecom.com/emersonsupport/downloads/EM6113.pdf .

I hope this helps.

Cindy Wells

Jan 22, 2011 | Cell Phones

1 Answer

How to retrieve messages when not at home? Model 26976GE 1A


REMOTE ACCESS

This section explains the remote access process for use with any touchtone

phone.

1. Dial the phone number for the answering machine.

2. After the answering system answers, press any numbered key on the

touch-tone pad to bypass the outgoing announcement, or wait until

the announcement finishes.

3. Enter the security code after you hear the tone.

4. Follow the voice menu to use the answering machine's remote functions.

The remote feature enables you to perform the following functions:

To Press this button

Review message 1

Play back messages 2

Stop message play back 2

Erase message 0

(during message playback)

Skip message 3

Turn off/on answerer 4

Review voice menu options 7
No valid dialing tones for 15 seconds will hang up the telephone line.

You can get the manual on the link below if you need page 31.

http://www.home-electronics.net/USER-GUIDES/26976_DOM_ES_CL_IB.pdf

Good luck

Dec 04, 2010 | GE Spacemaker 26976 Cordless Phone

1 Answer

Code to retrieve messages


Here are the instructions you need to follow:

If you want to be able to play your messages from a remote location, you need to enter a two-digit Personal Identification Number (PIN) code (01-99).
To select a PIN, perform the following steps:
1) With the phone in standby, press [menu/clock] twice.
The system announces "Security code," and the current PIN code is announced as it is displayed on the base.
Then the system announces the instructions for setting the PIN code.
2) Press [volume/select/ ] or [volume/select/ ] until the desired number appears.
3) Press [set] to select the PIN code. You hear a confirmation tone, then the announcement "Security code" followed by the new PIN code is announced. After a few seconds, the system announces "To set ring time, press menu again."
Note: The PIN code is set to "80" at the factory.

Remote Operation
When you are away from home, you can operate your answering machine with any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even record a new greeting message.
1) Call your telephone number.
2) During the greeting message, press [0] and enter your PIN code
3) The answering machine announces the current time and the number of messages stored in memory. Then you hear "To play incoming message, press zero two. For help, press one zero."
4) You may continue to listen to the voice prompts, or you may select a command from the following chart:
Command Function Command Function
[0] then [1] Repeat a Message [0] then [6] Answering Machine On
[0] then [2] Play Incoming Messages [0] then [7] Memo Record/Stop*
[0] then [3] Skip a Message [0] then [8] Greeting Message Record/Stop*
[0] then [4] Delete a Message [0] then [9] Answering Machine Off
[0] then [5] Stop Operation [1] then [0] Voice Prompts
* For Memo Record and Greeting Message Record functions, the first time you enter the corresponding command, it
starts the Recording function. If you want to stop the recording, enter the command again.
Note: Once you enter the remote access menu, you must enter a command within 15 seconds, or the
answering machine automatically hangs up and returns to standby.
5) After all of the voice prompts have been played, you hear intermittent beeps indicating that the system is in the
command waiting mode. You may enter another command at this time from the chart.
6) When you are finished, hang up to exit the system. The answering machine automatically returns to standby.

Turn on the Answering Machine Remotely
If you have forgotten to turn on your answering machine, you can turn it on remotely from any touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear intermittent beeps.
3) Press [0] and then enter your PIN code. The answering machine announces the number of messages stored in memory. You hear "To play incoming message, press zero two. For help, press one zero."
4) Press [0] then [6] to turn the answering machine On. You hear the outgoing message and a confirmation tone.
5) Hang up the phone; subsequent calls will be answered by the system.

Feb 28, 2010 | Uniden EXAI5680 Cordless Phone

3 Answers

I left my Vtech phone in New York, left for Europe and forgot to set the answering machine on. When I call in I get a factory recorded announcement that I'm not available, etc. I have my PIN # with me,...


Can you please specify the exact model of the phone? Because the steps in accessing it remotely varies from model to model. Anyway, you can try to follow the steps posted here and then test:

Remote operation allows you to control the functions of the Answering System when you
are away from the Base,and call from an outside telephone line. The Answering
System cannot be accessed from another telephone on the same line. You can access
many of the Answering System functons from a remote location, such as listening to
messages, changing recorded announcements, and recording memos.
Remote operation can only be accessed from a touch tone telephone. If the remote phone
is set to pulse dialing, switch it tone. If tone dialing is not available, you will not be able
to access the Answering System.
Note: All function codes should be entered within 2 seconds in order to activate Remote
Operation.
To Activate Remote Operation From a Different Telephone Line
1. If the Answering System is OFF, you can dial your telephone number and wait for
the Answering System to answer your call after 10 rings. An announcement, "Please
enter your security code" is given, and you enter your security code to use remote
operation.
2. If the Answering System is ON, it will answer your call and begin playing the currently
selected announcement (as with any incoming call).
3. Enter # followed by your 2 digit security code during the announcement. The
default security code is 19.
4. Once the security code is received, a double confirmation beep will be given, and
you are in Remote Operation mode. You can then control the Answering Machine
functions using the telephone keypad.
5. The user can also enter the Remote Operation mode during message recording. The
procedure is the same as step 3. The recording will be stopped after entering the
valid security code "s#xx " and the incomplete message will be deleted. If " 0s"
is entered, the Answering System will release the line, but the recorded message
will still be retained.
6. If the user enters a wrong security code, the system will release the line.
Playing Messages Remotely
1. Press " #1 ", " #2 " or " #3 " on the touch tone keypad to play the messages in the
corresponding mailbox.
2. The system will announce "Mailbox X. You have XX new messages and XX old
messages" and the system will playback the new message only. If there are no new
messages, the system will announce "Mailbox X. You have XX old messages. On
the other hand, in the absence of old messages, the system will announce only the
number of new messages.
Repeat Messages During Playback
1. Press "#4" once during message playback to repeat the current message.
2. Press "#4" twice within 2 seconds to skip to the previous message.
Skip Messages During Playback
1. Press "#6" once to skip forward to the next message.
Stop Message Playback
1. Pressing "#5" during message playback will stop playback.
Deleting Messages
1. Press "#9" once during message playback to delete the current message.
Note: Playback will pause if "#" or " " is entered. Answering System will wait for the
command in the following 2 seconds. If no further tone is entered, playback will be resumed.
Memo Recording
1. Press " 8".
2. After selecting the mailbox by entering command "1", "2", "3", You will hear, "Now
recording", followed by a beep.
3. Enter "#5" to stop recording when you have finished.
Change OGM Remotely
1. Enter " 7" to record a new OGM. You will hear, "Now recording", followed by a
beep to signal start of recording.
2. Press "#5" to stop recording. Your new OGM will playback automatically.
Check OGM1 Remotely
Enter "#7" to review OGM. You will hear playback of OGM followed by a beep.
Turning Answering System ON or OFF
Pressing "#0" toggles the Answering System ON/OFF. "Answer machine on", or "Answer
machine off" will be announced, followed by a beep.
Voice Menu for Remote Operation
The system provides two pre-recorded voice menus to help you during remote operation.
Press " 5", and you will hear the simple voice menu.
The simple voice menu is as follows:
• Press "#1" to play mailbox 1.
• Press "#2" to play mailbox 2.
• Press "#3" to play mailbox 3.
• Press "#5" to stop.
• Press "#4" to repeat the message.
• Press "#6" to skip the message.
• Press "#9" to erase the message.
• Press " 5" for other functions.
(To advance voice menu)
The advanced voice menu is as follows:
• Press "#7" to review outgoing message.
• Press " 7" to record outgoing message.
• Press " 8" to record memo.
• Press "#4" twice to repeat previous message.
• Press "#0" to turn the system on or off.
• Press " 5" to return to the simple voice menu.
Pressing any function code will stop the voice menu, and perform the corresponding
functions.
Exiting Remote Operation
1. Enter " 0" on the touch tone keypad to exit remote operation mode. The Answering
System confirms your action with a long beep and then disconnects.
2. The Answering System also automatically disconnects if no key is pressed within 20
seconds during remote operation.

Oct 17, 2009 | Vtech Two Line Digital Answering Machine...

1 Answer

All phones are flashing red


This is a "Voice Message Waiting Indicator" and it means that you have a new voice mail from your telephone service provider, or a new message on your answering machine. A lot of people do not even realize they have voice mail from their service provider because all the phone companies bundle services now. If you do not have a message on either you can reset the indicator by following the instructions in the manual

Jun 30, 2009 | Uniden 5.8GHz Expandable Cordless Phone...

2 Answers

Retrieve deleted voice message


I don't think this can be done. I read through the entire manual and there is no mention. I can email you a copy of the manual if you want.

Jul 08, 2008 | GE 29875GE Digital Answering Machine

1 Answer

New Uniden DECT2080 answering system not holding messages


How can I check the answering machine when I am away from home.

Jun 25, 2008 | Uniden Cordless Phone

5 Answers

Instructions for model 1188


Hi Diana - To record your outgoing message, hold down your ogm button ( outgoing message) for two seconds and it will ask you to record a message. To play back your message, just push the same button and it will play your message. If you don't like it just do it again. If this solves your problem PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks and have a good day.

Jeff

Jun 11, 2008 | BellSouth Digital Answering System 2006C...

3 Answers

Instruction Manual


Normal 0 Conairphone Digital Answering Machine -- Model TAD2018CG
http://www.conairphone.com/Pages/quick_reference.html (try TAD920)

Answering System Operation

A. Recording your personal outgoing announcement

1. Press and hold down the ANNOUNCE control.
2. After the beep, speak towards the front of the base; you have 30 seconds.
3. When finished, release button. Your unit will play back your announcement and reset to
answer incoming calls.
4. Adjust volume control on the side of the unit to set the speaker to the desired level.

B. Setting the Voice Time/Day Stamp

1. Press and hold the TIME/REPEAT control for 2 seconds until you hear "Monday 12:00 AM".
Release the control. Press and hold the On/Off Control until you hear the correct day.
Release the control.
2. Press and release the TIME SET/REPEAT Control. Press and hold the ON/OFF Control until
you hear the correct hour.
3. Press and release the TIME SET/REPEAT Control. Press and hold the ON/OFF control until
you hear the correct minute.
4. Press release TIME SET/REPEAT Control. Press and hold ON/OFF Control until you hear PM.
Press and hold PLAY Control to return to AM.
5. Press and release the TIME SET/REPEAT Control to complete procedure. Unit will prompt
the day and time.

Apr 15, 2008 | Conair TAD2018CG Digital Answering Machine

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Cell Phones Experts

Brad Brown

Level 3 Expert

15557 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14927 Answers

richie46

Level 3 Expert

12957 Answers

Are you a Panasonic Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...