Question about Computers & Internet

Open Question

My 2wire routers settings arent set right i want to know how to restore the factory defaults

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

De Guyver
  • 123 Answers

SOURCE: How do I factory default settings

The following is for the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-624S, DI-754, DI-764, DI-774, and DI-784 routers. To perform a reset, please follow steps below: Step 1 With the unit on, place a paper clip into the hole on the back on the unit labeled Reset. Step 2 Hold paper clip down for 10 seconds and release. Note: Do not repower unit during this procedure. Step 3 The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset. Resetting the router does not reset the firmware to an earlier version. It will change all settings back to factory defaults. If you have the European version of this router, this procedure may not work. Please consult the D-Link office near you. D-Link USA does not support the European version.

Posted on Feb 16, 2006

  • 17 Answers

SOURCE: restoring factory default settings

System Configuration of Fujitsu Amilo D-7820 PC Notebook:

Manufacturer:  Fujitsu

Family:           AMILO

Model:            D-7820

Speed:            PC-2100

Fixed RAM:      0MB

Standard RAM:  128MB

Banks:              2

Maximum RAM: 2GB

Sockets:            2

Chipset:             Intel 855 GM

Please check whether you have a systems disk or cd with an operating system e.g. MS XP Home edition.

If you have the original operating system disk or cd, reformat your hard drive i.e. assuming that you have windows XP click the Start button, then select Run, then type "cmd" then Enter, an MS DOS screen will appear. 

Type "format c:" and enter and it will then ask whether you really want to delete all files on the hard drive and then type "Y".  The computer will then wipe everything on your computer.  You can then insert your Operating Disk or CD and follow the instructions that appear on the screen to reinstall the original default settings or the Operating System.  Hoping that this will help you solve your problem. 

Posted on Oct 24, 2007

leroyal
  • 2120 Answers

SOURCE: Factory Default Settings

Press Menu * 2864 (within 2 seconds) [MAINTENANCE MODE] press 01 (INITIALIZE)

Posted on Oct 07, 2008

  • 1 Answer

SOURCE: Error 323

To restore factory defaults, press the reset button located at the back of the router for about 10 secs.

Posted on Jan 29, 2009

  • 59 Answers

SOURCE: Hi, I am trying to reset my 2wire 1800HG router in

you have to open internet explorer and type 192.168.1.254. then go to broadband link at the top of the page. hit the advanced settings then you have to re enter all you information like your username, password etc... i hope the helps you if i doesnt let me know.

Posted on May 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Forgot password


Router passwords cannot be easily or quickly obtained, your best option is to reset the router and from there create a new key.
To reset:


With the router on, hold down the "reset" button on the back for 10 seconds. This will reset your password and restore factory default settings.

Jul 28, 2011 | 2wire (2701HG-B) Wireless Router

3 Answers

Would like to restore my 2701hg b gateway to factory settings


  1. Unplug Your Router
  2. Turn The Router Around
  3. Look For A Hole About The Size of A Pencil Point
  4. Looking Closely, You Will See <Reset>
  5. Using An Unfloded Paper Clip, Insert The Paper Clip End Into The Reset Switch Opening
  6. Press and Hold For 30 Seconds and You Are Back To Factory Settings.
Thank You For Choosing FixYa~!

Mar 24, 2011 | 2wire (2701HG-B) Wireless Router

1 Answer

Do not know know password for wireless internet


Hi
Go here and download the manual http://static.highspeedbackbone.net/pdf/Netgear-WNR2000-manual.pdf
You will need to reset the router or change the password in the router 1. To change the password, goto Internet Explorer 2. In the address bar type 192.168.1.1 3. Press enter key 4. YOu should see a box with username and password fields. 5. username is admin 6.password is password 7. These are not the wireless passwords but the access password to get in the router. 8. Once in the router interface on Internet Explorer; goto the wireless sections and change the password there.
To reset the router WARNING: This will reset all the settings to what it was like when it came fresh out of the box. You may need to know some other settings. Restoring the Default Password and Configuration Settings You can restore the factory default configuration settings that reset the router's user name to admin, the password to password, and the IP address to 192.168.1.1. To restore the factory default configuration settings: 1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button, located on the rear panel of the router, for about 5 seconds, until the Power light begins to blink (see "Back Panel" on page 5). 2. Release the restore factory settings button, and wait for the router to restart, and for the Power light to stop blinking and become solid green. The factory default settings will be restored so that you can access the router from your Web browser using the factory defaults.
Failing this, please refer to the manual, page 29 onwards
All the best now
Phil

Dec 17, 2010 | NetGear WNR2000 Wireless Router

1 Answer

My default IP ADRESS is192.168.1.1, and am trying to change my router password for wireless connection


If you ever lose your settings or if your settings are changed and the router is not functioning properly, you can come to this area to restore your saved settings from the backup file you created. Click Browse to locate the backup settings file you previously created. When you have located it, click Restore and the settings saved within this file will be applied to the router. If you did not create a backup file, you may need to restore the factory default settings.
device3.gif Factory Settings If you ever want to erase all personal settings of your router, come to this area and click Reload to restore the factory default settings. All the current settings will be lost. If you change the router's configuration and it stops functioning properly you can reload the factory settings to fix it.
device3.gif The other method to restore the factory default settings is to press in and hold the RESET button on the Wireless MAXg Router for between five and ten seconds. You will lose all of your personal settings if you restore the factory default settings. You might need to do this if you are unable to access the Web User Interface or have forgotten your password.

Nov 07, 2010 | U.S. Robotics MAXg USR5461 (738168036790)...

1 Answer

Need to know the password


If you ever want to erase all personal settings of your router, come to this area and click Reload to restore the factory default settings. All the current settings will be lost. If you change the router's configuration and it stops functioning properly you can reload the factory settings to fix it.
device3.gif The other method to restore the factory default settings is to press in and hold the RESET button on the Wireless MAXg Router for between five and ten seconds. You will lose all of your personal settings if you restore the factory default settings. You might need to do this if you are unable to access the Web User Interface or have forgotten your password.

Or;
http://www.usr.com/support/5461a/5461a-ug/install.html

Nov 04, 2010 | U.S. Robotics USRobotics USR5461 Wireless...

5 Answers

How do you reset a password?


Easy, reset the router itself, should have a tiny pin hole in the back that has a button that you must compress, just google reseting your model.
If you have any problems let me know.

Apr 03, 2010 | NetGear DG834G Router

1 Answer

Linksys Group LIWRT160N Ultra RangePlus Wireless-N Broadband Router say's password is not enough characters, however I am using the right password. Why can't I set up this Window's computer?


Okay,i only option is to reset the router to its factory settings.
Please follow the steps to reset the router.
The router can be set to factory default by pressing the Reset button of the router and resetting through the router’s web-based setup page. Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. Any settings on the router will be erased and the router’s IP address will become “192.168.1.1,” the username is still blank, and the password will be “admin.”
To perform a hardware reset on your Linksys router follow the steps below.
Step 1:
Take note of the current settings of the device before resetting.
Step 2:
Press the Reset button of the router for 30 seconds.
Step 3:
If the normal reset does not work, unplug then plug back the router's power adapter while pressing the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router’s web-based setup page. .
NOTE: If you are using Mac to access the router’s web-based setup page,
Step 2:
When the router’s web-based setup page appears, click Administration then Factory Defaults.
Step 3:
Look for Restore Factory Defaults and select Yes.
Step 4:
Click 4268-009.png

May 18, 2009 | 2wire (1000-100016-002) Wireless Adapter

1 Answer

Hi, I am trying to reset my 2wire 1800HG router in order to restore to factory default. I reset to factory default on the webpage for the router, and then hit the reset button on the router itself. Now, I...


you have to open internet explorer and type 192.168.1.254. then go to broadband link at the top of the page. hit the advanced settings then you have to re enter all you information like your username, password etc... i hope the helps you if i doesnt let me know.

May 18, 2009 | 2wire 1800HG Router (RG1800HG00)

3 Answers

Forgot password to acess< and or its still default setting. could you tell me what the wireless 700 routers default password is


Restore Factory Default Settings When you restore factory default settings to the base station, you clear your Internet connection settings and any special base station configurations that you have established. After the restore is complete, you will need to reconfigure your base station settings or restore these settings from a backup file. You should restore the original factory default settings only under the following circumstances: O You are experiencing serious problems with your base station, and resetting the base station does not fix the problem. O You cannot remember your base station password. In this situation, you must restore the factory default settings by using the Restore button on the base station, and then use the default password admin to log on to the Base Station Management Tool. To restore factory default settings 1. Open the Base Station Management Tool, and then click Management. 2. On the Management menu, click Back Up and Restore Settings. 3. Under Restore factory default settings, click Restore Factory Default Settings. While the original factory default settings are being restored to the base station, the Power light on the base station turns orange. When the light is solid green, the settings have been restored. If you want to open the Base Station Management Tool after the settings have been restored, type admin as the password on the Logon page. Do not attempt to log on to the base station until the settings are restored and the Power light on the base station is solid green. After you restore the factory default settings to the base station, you should navigate to each page of the Base Station Management Tool and reestablish the network settings you want, or restore the base station settings by using a backup file. For information about creating a backup file of your settings, see the following section. Be sure to establish your unique base station password as soon as possible after restoring the factory default settings to prevent unauthorized users from logging on. For more information, see “Change the Base Station Password.” please rate this answer, thanks

Jan 30, 2009 | Microsoft MN-700 Wireless Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...