- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the problem is solved by expert electronic, because your tv have cpu program and need reconfiguration this program, And other question is you check cable conexion you check conexion you check format/image programing (NTSC/PAL) if in the setup or menu have the best configuration, no all problem is the component electronic... oh, you read manual step by step...
This is a known issue which requires the replacement of up to 3 chips and the addition of a modification ( diode) The IC's are AN5268K The modification requires the installation of a diode 1N4148 connected between diode D6XAL and Diode The 1N4148 anode to D6XAL anode. The cathode of 1N4148 should be connected to the cathode of D6F04
You should also re-solder any bad connections on the board. If you are at all unfamiliar with replacement of IC's or hesitant you should have the work done by a qualified technician
whenever you see horizontal line please reduce brightness of your tv for safety of crt.
your problem in vertical section only mostly due to loose contact in
connector,print or loose components.
Not easily, unless you can provide more detailed troubleshooting data.
What test equipment do you have and know how to use???
If you can "assist" with the troubleshooting I am certain that you can recieve repair suggestions.