Question about Multimedia Projectors

1 Answer

LCD Projector ASK C105 red image peoblem

Hi I have an Ask C105 LCD projector which seems to have a convergence problem with the red being out of line with the rest of the image... Ive checked the optic track for mirrors, LCD allignment and spoke with another firm in London who say it is a common fault with this model. Ive tried re-flashing the firmware from a computer but it the computer does not seem to want to respond to the projector or vice versa ( I used an 8 pin mini din plug to mouse input and tried both serial and usb outputs on the laptop and a desk top PC. Is there a fix for this.... anyone.... hhheeeelllllpppp!
Kind regards
Andy Hall

Posted by on

  • antonborger Nov 13, 2008

    i have the same problem and i dit not solve de problem whit new firmware.

    if you want to put new firmware in to the projector you need a 8pin minidin to sub d9 conector (com port from pc).

  • Anonymous Jan 01, 2009

    I am Just Compounding the issue!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 53 Answers

Mmmm

Posted on Apr 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ASK Proxima C420 shuts down after 30 seconds. No indication of overheating or lamp problem.


Might be a problem with the video input. Try a different cable. If HDMI, you will need a really good cable for HDTV or 3D, and they are very expensive. My 12 foot cable cost $180.

Sep 12, 2014 | ASK Proxima C420 Multimedia Projector

2 Answers

Ghosting Image


hi!!!
may be the lens has alignment the lens
of your projector there a adjustment
try to adjust!!!

Sep 21, 2008 | Philips ProScreen 4750 Impact Multimedia...

1 Answer

Sony VPL-P510 projector


there are 3 LCD panels in the projector.
red panel,green panel and blue panel
I seems that the red panel is failing
We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry,Lampdeng Limited

Mar 18, 2014 | Multimedia Projectors

1 Answer

Convergence


LCD panels are broken. you need a new one
unit price is USD120
any questions, feel free to ask me
have a nice day!
Jerry Lampdeng Limited

Oct 01, 2013 | Eiki LC-X986 Projector

1 Answer

Multiple reddish pink vertical lines going from


Hi

We can check if the problem is on the hardware(projector) itself or if from source(device connected to projector) try to turn on projector without connecting any other devices to it. If you can still see the pink line- try to remove bulb and reinstall it. If all fails and pink line still visible, there is a problem with projector. If no line is present- check settings and change input signals.

Hope this helps

Mar 26, 2010 | ASK Proxima DP6860 Plus Multimedia...

1 Answer

Progressively worse red "ghosting" when showing films....


This could be either a connection problem internally or a problem with the red filter convergence. This is not a project to be attempted by an inexperienced person. The convergence adjustments should only be attempted with the proper setup and equipment. If you can solder, carefully open up the unit and look for poor solder joints and resolder them. You can also reseat all of the connectors and cables. If neither of the above ersolve the problem, take it in for service.

Dan

Aug 14, 2008 | Sharp Notevision PG-B10S Multimedia...

1 Answer

RGB on Barco Reality Sim 6 diverge at edges...


Should be possible to adjust the convergence having a projector this quality! Call Barco in Belgium and ask them!

May 20, 2008 | Barco Multimedia Projectors

1 Answer

Color Problem


I think that projector used three different LCD panels with red, blue and yellow. You probably have a damaged red LCD panel, and if so, it is not worth getting the projector fixed. Those panels were really expensive back then.
I once had that red problem with a projector and it turned out to be a bad connection on one end of the "computer to projector" cable. Borrow one from a friend and see if it solves the problem.

Mar 23, 2008 | Multimedia Projectors

2 Answers

Proxima C160 Color Convergence Issue...


There are no adjustments for convergence in the service menu. The code is: Effect, Blank, Video, Computer, Volume Down, Volume Up.

Jun 01, 2007 | ASK Proxima C160 Multimedia Projector

Not finding what you are looking for?
Multimedia Projectors Logo

Related Topics:

826 people viewed this question

Ask a Question

Usually answered in minutes!

Top Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you a Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...