Question about D-Link DP 301U (DP-301U) Print Server

2 Answers

Unknown address I reset the dp-301u by holding the reset button, but now I can't connect to the print server. How do I find the IP address? (I tried 192.168.0.10 in a web browser, but could not connect).

Posted by on

2 Answers

Please how do i get to the networking MAP to enable me get the IP address? post to hilychi@yahoo.com

Posted on May 27, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Install Network Manager in your and install . When you install this software then you go to networkingmap there you will get ipaddress of your print server

Posted on May 08, 2008

2 Suggested Answers

  • 3 Answers

SOURCE: Browser Setup Access address for DLink DP-301U Print Server

It's in the quick installation guide, which is freely downloadable from their web site. Top of page #3...

"The factory default IP address of the DP-301U is 192.168.0.10."

Posted on Dec 31, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have print server DP-301U Pls let me know the default IP address for configuration


Hi
As far as I can remember the default IP is 192.168.0 .10, subnet 255.255.255.0
If this isn't the correct IP address, you'll need to reset the d-link print server Hope this helps
Regards, c0d3

Feb 09, 2011 | D-Link DP 301P (DP-301P) Print Server

1 Answer

I have installed the DP-301U print server on my home network to print to an HP Laserjet 4050. When setting up the print server per instruction, I set my computer IP address to a static IP address. The...


Your print server has to have its own IP address. If you have your computer as 198.168.1.1 then your print server would be 198.168.1.2.
You cant have the same IP address on any 2 items on your network.

Oct 20, 2009 | D-Link DP 301U (DP-301U) Print Server

1 Answer

What is the ip?


default IP address of DP-301U is 192.168.0.10

Jul 14, 2009 | D-Link DP 301U (DP-301U) Print Server

1 Answer

Browser Setup Access address for DLink DP-301U Print Server


It's in the quick installation guide, which is freely downloadable from their web site. Top of page #3...

"The factory default IP address of the DP-301U is 192.168.0.10."

Dec 18, 2008 | D-Link DP 301U (DP-301U) Print Server

2 Answers

Setting up IP address on server


Download and install <a href="http://www.wireshark.org/download.html">Wireshark</a>.

After installing, click the first button on the toolbar to list available capture devices. Select the interface you use to connect to your network (wired or wireless card) by clicking the "Start" button next to it.

Power off and back on the print server. Watch the log on Wireshark, and look for the D-Link identifier under the "Source" tab. In the same row, it will tell you the IP address the print server has assigned to it. You can then change your computer's IP to be in the same subnet (match the xxx's in the address xxx.xxx.xxx.yyy), allowing you to connect to it.

Oct 30, 2008 | D-Link DP 301U (DP-301U) Print Server

3 Answers

D-Link DP-301U Problem


It should be fine as long as it is in the range that the router can recognize and that it doesn't conflict with another IP address used on another device. Usually on the networks I design I keep the printers on higher IP address so that they can be managed on a certain range.

Is this the wireless print server?

What specifically do you mean by PJL printer block?

Aug 04, 2008 | D-Link DP 301U (DP-301U) Print Server

1 Answer

DP 301U and Lexmark 2550 (all-in-one)


1. Set up your print server with an IP address.
2. Ping your printer IP address.
3. If successful, Add printer wizard. Create a new port, Make it TCP/IP port. Put the IP address in the IP address field. Click next and Use Generic 9XXX Raw.
4. Install the driver provided by the manufacturer for your printer and assign it to the Network port.
5. Print.

Hope this helps.

Jun 03, 2008 | D-Link DP 301U (DP-301U) Print Server

3 Answers

Documents not printing


Hi How to check the print server is in the wireless network or not!! Check under the Router Setup page Router's ip address... Check if you are able to ping the Print Server Ip address....Since it the router will assign a ip address from DHCP range.. If you are able to ping the router's ip address and the print server ip address then the print server is in the Wireless LAN... Try the following steps. 1. Go to run and type "cmd" press enter 2. type ipconfig. 3. Check the range of ip address...if its 192.168.0.XX 4. Try pinging that ip address.. 5. If able to ping the router and print server.. Then the wireless network is fine... Somehow some of the printer's don't work with some of the print servers.. Check if D-link does support the printer or not!!!! for this particular model of the router...

May 30, 2007 | D-Link DP 301U (DP-301U) Print Server

Not finding what you are looking for?
D-Link DP 301U (DP-301U) Print Server Logo

Related Topics:

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...