Question about Creative Labs ZEN Vision:M Digital Media Player

1 Answer

C cover art does not transfer to my zen vision m, only the music tracks transfer

I have a zen vision m, and use windows media player. When I first started the sync process from WMP to the device, the album art trasferred along with the songs. Now just the songs transfer. I have tried everything to correct this problem, but no luck! Please help!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

A few possibilities. Go to http://193.95.171.83/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=224,E=0000000000373151655,K=1742,Sxi=15,Case=obj(8179),Kb=ww_english_add,VARSET=ws:http://us.creative.com/

for more details

Creative ZEN players do not currently support album art from Rhapsody version 4.0.
Album art is either embedded in a track, or exists as a thumbnail image in a separate file, allowing one album art file to be associated with an album. Currently, Rhapsody only supports album art embedded in the track. Future versions of Rhapsody are expected to support thumbnail versions.
Creative Media Explorer or Windows Media Player 10 or 11 can be used to transfer music purchased from Rhapsody to a player with album art included.

Album Art is supported by Creative ZEN, Creative ZEN V Plus, ZEN V, Vision:M and ZEN Vision players.
The ZEN Vision (PF1150) requires a firmware update for Album Art. You can download the updated firmware:

If you experience any difficulty transferring Album Art with Windows Media Player 10 or 11, to ZEN Vision:M, delete WMPInfo.xml (see below), and then transfer the tracks again.

-Tha Mp3 Doctor

Posted on May 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I upload album art onto a philips gogear vibe for all my artists? I have album art inside my folders and i had itunes embed the art into the files when i uploaded them; however the art only shows...


There are 3 possible ways in getting the album art for your music album.
  1. Album art may be obtained from the online Music CD database that Windows Media Player uses.
    Note: Not all music albums have album art available in the online CD database.
  2. From the online music store where you purchased your songs or albums, the album art may be downloaded along with your purchase.
  3. You may also create your own album art by transferring your favorite jpg photo into the selected album folder and rename it to Album Art.jpg.
To download album art from the online database and transfer to the player.
  1. Make sure that your computer is connected to the Internet.
  2. Launch Windows Media Player.
  3. Go to Tools> Options> Player.
  4. Make sure the "Enable picture support for devices" check box is selected.
  5. Click the Apply, then the OK buttons.
  6. Select the "RIP" tab on the task menu bar.
  7. Insert your music CD into the CD drive of your computer. The Windows Media Player will take a few seconds to show the content of the CD on the display.
  8. Click "Find Album Info". The Player accesses the database hosted by WindowsMedia.com and displays information about the album in the Album Information pane. The album art will be shown if available.(Note: For some music CD, album art may not be found in any of the online database.)
  9. Click Finish to update all the information about your album and show it in the Rip pane.
  10. Connect your Device to the computer.
  11. Select the tracks that you would like to rip by clicking in the check b ox next to the track.
  12. Click the Rip music button to start ripping the music CD.
  13. Once the tracks are finished being ripped to the library, go to the Media library and select the songs that you have just ripped.
  14. Add them to the sync list and transfer them into your Device. The album art will be transferred along with those selected songs.
  15. Disconnect the Device from your computer.
  16. Make sure that the option in your Device has been selected to display the album art on the device, at Settings-> Album art.

To create your own album art and transfer it to the Device
  1. In Windows Media Player , right click on the song you want to update the album art of.
  2. Select "Advanced Tag Editor" option.
  3. In the screen that pops up , select the "Pictures" tab.
  4. Use the drop down list to make sure that the type of picture you add is the Cover (front).
  5. Click on "Add" to associate a picture as the Album art for the song and all the songs in that album.
  6. Add this (and other songs from the same album) to the sync list and transfer them into your Device. The album art will be transferred along with those selected songs.
  7. Disconnect the Device from your computer.
  8. Make sure that the option in your Device has been selected to display the album art on the device, at Settings-> Album art.
You can also click on this link to show the graphical steps on how to upload/add album art on your songs.

Hope this information helps. If it does, please do not forget to give me a rating and a comment.

Apr 09, 2011 | Philips GoGear ViBE Digital Media Player

1 Answer

Can't put music on my zen vision m 30 gig


it might be the files ur using maybe there not compatable or maybe corupt

Jun 23, 2009 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

Creative zen m vision won't start up,


You tried these yet? 
Reset, Format or Clean Up a Zen Vision:M

If your player stops responding, you can reset it. To reset the player, push the end of a pin-like object (for example, a pin or straightened paperclip) into the Reset hole. This should not cause you to lose any data or audio tracks, unless you were in the middle of transferring an audio track.

To reset Zen Vision:M to factory default settings:

Press on the Menu/Back button on your player, and select System, and then Reset.

To Format or Clean Up Zen Vision:M

1. Detach the Zen Vision:M player from your PC , and ensure that the unit is off.

If the battery is too low, charge the battery fully before continuing
2. Slide the Power switch towards the Power icon and hold the switch in the Power On position.
3. Push the end of a pin-like object (for example, a straightened paper clip) into the reset hole, press gently and remove.

4. Release the Power switch when the Creative logo appears. The Recovery Mode appears:
* Clean Up (Performs a disk scan on the player's hard disk, it will not affect music files)
* Format All (Formats the players hard disk - Note: all contents will be lost)
* Reload Firmware (Reloads the Operating System on the Zen. Select this option ONLY if there is a firmware available to reload.)
* Reboot (Reboots the device).
5. Select Clean Up or Format from the Recovery Mode, and then select Reboot.

http://dmzweb4.europe.creative.com/...com:80,Case=obj(14048),Kb=ww_english_add

pls rate it, thanks

Nov 12, 2008 | Creative Labs ZEN Vision:M Digital Media...

5 Answers

Player reads Select music to PLAY from the Music Library


are you not able to transfer music from the computer to the player?

Jul 12, 2008 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

I can't get album art to appear on my Creative Zen (4GB)


Though this might be a bit late - Try WinAMP. I use Winamp and EVERY SINGLE album art gets transferred. Hope this helps!

Jun 07, 2008 | Creative Labs Zen Digital Media Player

1 Answer

It won't transfer my zen vision M songs from my computer


I've been able to solve the problem I had with transferring files to my Zen Vision M.

I uninstalled all components of Media Source 5 and Zen Vision M Series Explorer on my PC. I then reinstalled them again. I also rolled back to Windows Media 10 (as I recently upgraded to v 11) and unchecked Sync with Zen Vision M in tools/options/devices on WM player. I then run the Clean up in recovery mode on the Zen. When the PC restarts after the installation of the software it will ask for you to connect the player. The PC should now successfully transfer files to the player.

Hope it works for you too.

Apr 12, 2008 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

My zen is freezeing


1. I'd try a system clean up first (instructions below)
2. definitely upgrade your firmware (http://us.creative.com/support/downloads/)
3. If all else fails, back up all your music on your PC and format it (instructions below)

.... from Creative's site

Reset, Format or Clean Up a Zen Vision:M If your player stops responding, you can reset it. To reset the player, push the end of a pin-like object (for example, a pin or straightened paperclip) into the Reset hole. This should not cause you to lose any data or audio tracks, unless you were in the middle of transferring an audio track.
To reset Zen Vision:M to factory default settings:
Press on the Menu/Back button on your player, and select System, and then Reset.
To Format or Clean Up Zen Vision:M
  1. Detach the Zen Vision:M player from your PC , and ensure that the unit is off. If the battery is too low, charge the battery fully before continuing
  2. Slide the Power switch towards the Power icon vision_m_reset.jpgand hold the switch in the Power On position.
  3. Push the end of a pin-like object (for example, a straightened paper clip) into the reset hole, press gently and remove. vision_m_reset1.jpg
  4. Release the Power switch when the Creative logo appears. The Recovery Mode appears:
    • Clean Up (Performs a disk scan on the player's hard disk, it will not affect music files)
    • Format All (Formats the players hard disk - Note: all contents will be lost)
    • Reload Firmware (Reloads the Operating System on the Zen. Select this option ONLY if there is a firmware available to reload.)
    • Reboot (Reboots the device).
  5. Select Clean Up or Format from the Recovery Mode, and then select Reboot.

Jan 05, 2008 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

Zen Vision M freezing during music upload.


Try to add your music a bit at a time instead of your whole library at once. That will freeze it. You can also try sync with Window's Media Player, which works a lot better than the Creative software.

Nov 29, 2007 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

Transferring tracks to my Nomade Zen Xtra Version 2.02.06


ok the easier way of doing it is to go tomy computer and look for drive G WHEN YOU HAVE CONECTED YOUR MP3 TO MACHINE RIGHT CLICK ONIT EXSPLOER AND LOOK FOR MUSIC FILE AND GRAG ALL OF THE MUSIC YOU HAVE INTO THIS FILE

Oct 17, 2007 | Creative Labs Nomad Jukebox Zen Xtra MP3...

1 Answer

Album art troubles!


File -> Open Directory -> browse to your music folder and make sure the "recurse subdirectories" button is checked. Press Open.

Let the tracks load in.
this is mt least favorite subject
so you can read this
http://www.anythingbutipod.com/forum/showthread.php?t=1338

May 22, 2007 | Creative Labs ZEN Vision:M Digital Media...

Not finding what you are looking for?
Creative Labs ZEN Vision:M Digital Media Player Logo

960 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs MP3 & Digital Media Players Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Are you a Creative Labs MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...