Question about Whirlpool GHW9250M Front Load Washer

2 Answers

When the machine is off it is filling up with

Whirlpool Duet GHW9250ML2 when the machine is off it is filling up with water, unplugged it and am having the same problem with it unplugged, thought it might be the inlet valve but think that would need power to work

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 744 Answers

It sounds like you're probably looking in the right place...it's possible that the inlet water valve is stuck open or simply defective. Turn off the water, turn off the power, remove the hoses and check the inlet valve. The valve could be stuck, have something in it. You may need to remove the inlet valve(s).

Posted on Jul 07, 2010

Testimonial: "Thank you very much I will give that a try"

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

Water valve is stuck open. Is water hot or cold that continues to flow? That's the part of the valve that is stuck open. You can use if you shut water off at your pipe. It's when they are stuck closed that you cant use until you replace water valve.. and if you dont know, that's the part the hoses connect to on your washer, usually with blue plastic threads. Careful not to cross thread when reinstalling hoses.

Posted on Jul 07, 2010

Testimonial: "Thank you very much"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer fills overnight (GHW9400PW4)


a bad water inlet valve try unplugging machine and see if it still does it? if it doesnt do it when unplugged then u have an electrical signal problem from eiither control board or timer if it keeps doing it when unplugged its ur water inlet valve

Jul 12, 2014 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Thw washer fills with water when off


The inlet valve is faulty and you have to replace it. It is located on the right side of the machine viewed from the rear where the fill hoses are attached to.Turn-off the water supply, unplug the machine and do the following:

  1. Remove the three screws holding the top panel in place.
  2. Disconnect the hoses and electrical connections to the water inlet valve.
  3. Remove the mounting screws holding the water inlet valve.
  4. Reinstall the replacement valve.
  5. Reinstall the hoses and the electrical connections.
Replacement valve part number for Whirlpool Duet GHW9150P front load washer is 906483.

Jan 12, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My whirlpool duet washer is filling with water when it is off. it only drips, but two days in a row it was filled up above the bottom of the door openeing and spilled on the floor,


This problem is either attributed to a defective water inlet valve, or defective pressure switch. An easy way to determine which one may be causing the problem is to unplug the washer, but leave the water taps on. If the washer continues to fill, you have a defective water inlet valve. If the water stops, I would recommend changing your pressure switch.

Post back and let me know if you require further assistance. I hope this helps you.

Sep 06, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Fills on its own door open or closed


I would bet the water inlet valve is weeping. It may not seal shut every time. It could have a piece of rest stuck in it also. It's cheap and easy to replace. The part # AP3128776.

Feb 22, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Water supply


yes it is normal. It fills up during the washing proces
I had the same thought at first but it truns out ok.

Jun 08, 2008 | Whirlpool Duet GHW9150P Front Load Washer

3 Answers

Keeps filling up with water


Hi, the water valve is defective, to make sur unplug the washer 117 electrical corde from the wall and look if it still fill up, if yes then u can be sure that the inlet valve is defective, juste replace the valve and ur home free.. wish u well, Alain

May 22, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

HELP WHIRLPOOL DUET


post me your email here and
I will send you a PDF of the service manual
Thanks Gary

Apr 04, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool GHW9250M Front Load Washer Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2328 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...