Question about Vacuums

1 Answer

Legend II Kirby footswitch

I have a Legend II footswitch foolishly did not record the position of the wiring I have 2 reds for the light and a positive and negative could you tell me which wire goes in what hole please

Posted by on

  • 1 more comment 
  • Anonymous Oct 02, 2008

    I ned to see the wiring scheme for the kirby legend two foot switch

  • Nsar Qadr Apr 27, 2013

    the knee bone connected to the hip bone and the....

  • Nsar Qadr Apr 27, 2013

    i pulled all the wires out, and the foot switch now i am confused....then someone mentioned buy another one, and check the wires, i may do this.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 310 Answers

Generic problem for all Vacuums
Legend II Kirby footswitch
I have a Legend II footswitch foolishly did not record the position of the wiring I have 2 reds for the light and a positive and negative could you tell me which wire goes in what hole please

I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
I do not have schematics of the wring diagram in order to help you on this question but to be accurate you will need to contact a serv tech tat would be in the yellow pages , or call the Kirby factory service or some examples listed below:
http://kirby.com Contact Us by Phone
United States and Canada 1-800-494-8586
Between the hours of 8:00 am to 5:00 pm EST
Monday thru Friday

www.A-1Vacuum.com 1-800-657-1874 ask for the service dept

Posted on Apr 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where does the power light clip on to on the kirby legend 2 1984


The light clips into the top and mid point of that black on off switch.
It is the biggest pain to see those 2 entry terminals on the back of that switch and the only way is to cut those white tie wraps that go around the light wires to the pot metal frame to get just the extra amount you will need.

A good light source and a sharp pair of needle nose pliers will be needed to push the 2 light plugs into that main black switch.

I used to dread that when replacing those entire switches until getting used to it.

Another note that if you get the motor wires reversed when plugging them into that switch......it reverses the motor and will blow instead of suck.

Hope this helps!
William R!

Sep 19, 2014 | Kirby Heritage II Vacuum

1 Answer

Can you give me a list of Kirby vacs models & the year they were released so that I know how old they are?


1935 KIRBY Model R*
19?? KIRBY Model 2R
19?? KIRBY Model 3R
19?? KIRBY Model 4R
19?? KIRBY Model C
1939 KIRBY Model 2C
19?? KIRBY Model 3C
19?? KIRBY Model 4C
Model 505 - 1945
Model 508 - 1948
Model 509 - 1949
Model 510 - 1950
Model 511 - 1951
Model 512 - 1952
Model 513 - 1953
Model 514 - 1954
Model 515 - 1955
Model 516 - 1956
Model 517 - 1957
Model 518 - 1958
Model 519 – 1959
Model 560 - 1960
Model 561 - 1961
Model 562 - 1962
1963/64 Sanitronic VII (Sirocco)
1965-67 Dual Sanitronic 50 (Sirocco)
1967-70 Dual Sanitronic 80 (Avocado green)
1967-70 Dual Sanitronic 80 (Avocado green)
1970-73 Classic 1CR (Medium brown, gold bag)
1973-76 Classic Omega 1CB (Dark brown, dark brown pinstriped bag)
1976-79 Classic III 2CB (Candy-apple red, plaid bag)
1979-81 Tradition (Dark blue; intro of paper bag)
1981-84 Heritage (Gray/orange)
1984-89 Heritage II Legend (Charcoal/gray/red)
1989-90 Legend II (Dark rose-pink)
1990-93 Generation 3 (Alabaster)
1993-96 Generation 4 (Medium gray)
1996-99 Generation 5 (Maroon)
1999-01 Generation 6 (Black/Yellow)
2002-05 Kirby Ultimate G
2005-06 Kirby Ultimate G Diamond

http://www.vacuumwizard.com/history-of-kirby-vacuum-cleaners.html

Sep 12, 2010 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

Kirby heritage model 1hd. wires fell off safety switch. Need color to position on switch


if your looking at the back of the switch were the wires go in. Starting from left to right. you will see letter below the hole were the wires go in. for example, Y , yellow or " R " for red. this should help.

Nov 19, 2009 | Kirby Heritage II Vacuum

1 Answer

How do you put on the attachment hose?


The Heritage II Legend...First you make sure that the machine is unplugged from any outlet,. Now, raise your height adjust to the highest level. Next you will need to turn your belt lifter on the front of the nozzel to the right as far as you can. Now flip the hinged light cover up, and turn the latch that holds down the head to the left. Your nozzle is now released. Now take the hose and roll it on to the bar from the front to the back, make sure it is aligned and then turn the latch to the right locking the hose, and you are ready to kirby it up! Hope this fixesya! Let me know, Thanks, Rene (the Vacuum Doctor)

Nov 13, 2009 | Kirby Heritage II Vacuum

1 Answer

Wiring foot pedal switch legend II


If I remember correctly,on the switch itself,each connector is letter coded.'W' for white,'R' for red,and so forth.The manual mostly talks about how to change attachments and basic operating,but not repairs.

Dec 20, 2008 | Kirby Heritage II Vacuum

2 Answers

Kirby Legend II


http://geeksquad.fixya.com/ThreadView.aspx?prdid=11558&thid=818960
Kirby Legend II
Posted by smokey 1 on July 22, 2008
Hello, Help please, Using my vacuum, turned it off briefly, then went to turn it back on and it would not .I checked plugs which were both fine. Motor is strong, impeller is fine. The light comes on near the button to turn it on however it's not doing anything. Switch maybe? Just a guess. Thanks for your help! Alice
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. It can be only one of 2 things, either it could be the safety switch or the foot switch and they would have to be replaced. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 22, 2008 | Kirby G4 Bagged Upright Vacuum

2 Answers

Kirby Legend 2 Vaccum cleaner


Did you ever find a use and care book for this vacuum.  I have one I could scan for you.

Jun 27, 2008 | Kirby Heritage II Vacuum

2 Answers

G4 Footswitch wiring


I have published an online guide...it may be of help to you. Just click on the link to view it.

Marci

 

http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018

May 25, 2007 | Kirby G4 Bagged Upright Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...