Question about SpeakerCraft MZC-66 Amplifier

2 Answers

One of my mxc 66s ?

I have two 66s. one of them the status leds are out . and the remotes are off. Key pads and speakers are fine if I connect them to other channels.How can I get those channels to work again.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 30 Answers

As you have no doubt discovered, the MZC-66 is the most phenomenal and sophisticated home sound controller/amplifier on the market today. No need to despair if it is not working. I repair MZC-66 so it will never fail again. I also reprogram them, upgrade the firmware, and upgrade the cooling to generation 2. Please contact me so that I can help you.

http://calgary.kijiji.ca/c-buy-and-sell-electronics-Speaker-Craft-MZC-and-BB-Series-Amplifiers-Repair-Service-W0QQAdIdZ229607818

I have many satisfied MZC-66 customers.

Posted on May 12, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 96 Answers

CHANGE THE BATTERY OF YOUR REMOTE

Posted on Jul 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to confirm if sensor is damage or remote not working


To check the remote.. turn on the camera on your mobile... and look the led on the front of the remote through the camera press any key in the remote... and if it is working you can see light blinking in your camera.... if not.. confirm that the remote is not workin

Dec 31, 2014 | Altec Lansing : 5.1 Amplified Speaker...

1 Answer

Hi, my old remote key pad used to lock itself so if I bumped it in my pocket it wouldnt start. I bought a new 2 way recently but the key pad stays unlocked. How do I get it lock?


Press and hold the "f" for 8 seconds to access the remote programming features. The remote will emit one long beep and the LEDs will illuminate. Press the unlock button to access the remote programming features. Two transmit LEDs will flashes and two beeps indicate the remote programming features are accessed. Press the lock button on the remote( LED on indicates auto locking on, LED off indicates auto locking off). Press and release "f" button to exit programming.

Apr 12, 2011 | 872 Responder LE keyless entry security...

1 Answer

The remotes for my system do not operate when I press the lock or unlock or remote start buttons. Is there a way that I can reprogram the two remotes to work with my remote start sytem. It is the python...


The "pair" the remote with your system:

1.PRESS AND HOLD the f button on the remote UNTIL the transmit LED lights solid (approximately 10 seconds)
2.PRESS AND HOLD the remote start button (circle arrow) UNTIL the LED blinks 3 times and the amber transmit LED lights up. Your remote is now ready to pair.
3.. Turn the key to the on position
4.Within 5 seconds PRESS AND RELEASE the control button on the antenna.
5. Within 5 seconds PRESS AND HOLD the control button. The status LED will flash one time and the siren will chirp to confirm that the system is ready for remote pairing.
6. Press lock button on remote. System will respond with chirp toconfirm pairing.

Oct 28, 2010 | 1401 Remote Start/Keyless Entry System

1 Answer

How do u program Bush DFTA13HD STB TV buttons


The following is an extract from the Bush DFTA13HD/ DFTA13HDSIL user manual, page 9;

1. Press STUDY key until Red LED remains lit (for about 3 seconds)
2. Point Converter (Bush) remote control to TV remote control directly, keep the distance about 1~3cm
3. Press the "Power" key at TV/s remote control to send signal to Converter remote control. The LED light will flash till steady. Then press "Power" key at Converter remote control. It will record the signal.
4. Now the Power key can turn on/off TV/s power
5. Repeat settings of learning for the other keys
You can repeat Step 3-4 for setting of learning for the other keys at TV remote control, such as VOL /-, CH /-, and F1, F2 are reserved for any other keys you want to set up.

Note:
1. When you have finished setting the learning keys, press the STUDY key to leave the learning status, and the LED light will turn off.
2. The learning function of this remote control may not support all types of TV sets, if you still can not control your TV after you have attempted the above steps, then this remote control may not support your TV or its remote control.

Jul 19, 2009 | Televison & Video

1 Answer

My Logitech EX110 wireless keyboard has no light indicators for CAPS LOCK and NUM LOCK. Should it have those indicators?


Your EX 110 receiver has 3 indicator lights (LEDs) that display the status of the Caps lock, Function key, and the Num lock during normal operating mode. These lights will also flash when the connect button on the receiver is pressed.
LED A: Indicates that the Caps Lock (Capital lock) key is on when lit.
LED F: Indicates that the F keys are in Standard F Keys Mode when lit and in Enhanced F Keys Mode when the LED is off.
  • Your EX 110 keyboard has an Enhanced F Keys Mode for F keys that provides additional functions you can program. See Knowledge Base article 9526.
LED 1: Indicates when the Num Lock (Number lock) key is on. This function allows the number pad to produce only numbers

Mar 27, 2009 | Logitech EX110 SP CORDLESS Keyboard/Mouse

2 Answers

Cap Lock on or off


Your EX 110 receiver has 3 indicator lights (LEDs) that display the status of the Caps lock, Function key, and the Num lock during normal operating mode. These lights will also flash when the connect button on the receiver is pressed.
LED A: Indicates that the Caps Lock (Capital lock) key is on when lit.
LED F: Indicates that the F keys are in Standard F Keys Mode when lit and in Enhanced F Keys Mode when the LED is off.
  • Your EX 110 keyboard has an Enhanced F Keys Mode for F keys that provides additional functions you can program. See Knowledge Base article 9526.
LED 1: Indicates when the Num Lock (Number lock) key is on. This function allows the number pad to produce only numbers

Feb 11, 2009 | Logitech Cordless Desktop EX110

2 Answers

Door close with wireless remote entry but will not open


It sounds like this remote has lost its program! you will have to reprogram it!I hope this helps ya!

Dec 15, 2008 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Night Light


Your Control Key Pad is a circuit with each function and button a switch. The pad on your TV Remote, and Telephone is no different. The Key Pad is failing, It will only get worse. Determine if you can replace the Touch (Key) Pad. Not the Control Circuit, just the Touch Pad. Sometimes you can get it seperate. It connects by a Flex Cable to the Control Circuit.

Jan 28, 2008 | Frigidaire PLMV169DC Microwave Oven

Not finding what you are looking for?
SpeakerCraft MZC-66 Amplifier Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top SpeakerCraft Audio Players & Recorders Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

James Oliver

Level 1 Expert

5 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a SpeakerCraft Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...