Question about Canon Office Equipment & Supplies

1 Answer

Canon MP560 printer screeches when attempting print. Nothing prints and error message shows. I following instruction of turn of and back on with no change.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,561 Answers

Hello,

Follow below procedure

1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.

If the problem still persist after this, the problem could be a damage belt, you might need to replace the belt on the printer because of the screeches indicate a damage belt.

Take care.
8: Unplug AC Power Cord to set data.

Posted on Jul 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Canon mp560 series has an error.it says an error has occured.Turn off power then back on again.If problem persists see the manual and I follow that instructions but still not working


FIRST OF ALL I WILL ADVISE YOU TO REMOVE OR DELETE ALL OF YOUR PRINTER DRIVERS FROM YOU COMPU DO THIS AFTER YOU UNPLUG AND DISCONNECT ALL THE CABLES OUT OF FROM THE BACK OF YOUR PRINTER AND COMP AFTER YOU DO THIS GO TO CANNON WEBSIDE>SUPPORT > DRIVERS ENTER YOUR PRINTER MODEL# COMPU INF ETC DOWNLOAD AND INSTALL DRIVERS , THEN RECONNECT ALL CABLES BACK AND FOLLOW INSTRUCTIONS AND YOUR PRINTER SHOULD WORK BACK.

Sep 28, 2014 | Canon PIXMA MP560 CLR INKJET P/S/C/F FB WL...

1 Answer

B200 error on canon pixma MP560 inkjet printer


Try this. Disconnect printer from computer
2. re- connect after a minute.
3. from tools menu, clean cartridge.
4. now allign cartridges from the same tool menu.
5. complete allignment process as directed.
6.now try test print.

Dec 22, 2013 | Canon PIXMA MP560 CLR INKJET P/S/C/F FB WL...

3 Answers

Canon pixma mp560 printer error b200


Leave the cover open, turn off, before it off, hold the reset & Start (color) until it completely off, then turn it back on. it works for me, good luck folks

Jun 29, 2012 | Canon PIXMA MP560 CLR INKJET P/S/C/F FB WL...

1 Answer

Canon printer MP560 communication error - paused printing but nothing in the cue paused


Check it:

1. Your USB cable
2. your cartridges
3. If it did not work with the other two, you have a problem with your logic board, take it to a service center.

Apr 24, 2012 | Canon MP560 All-In-One InkJet Printer

1 Answer

Canon printer i865 Orange light blinks 5 times and the following message appears: "Operator error. Press printer's RESUME button. If this doesn't clear the error, cancel printing and turn the...


Dear Bruce,
Blinking in orange 5 times indicates that the print head of your printer is faulty. To ensure this you can compare by using another print head. But first,please remove the print head and check whether it is burnt. Some short circuitry may cause the problem. Thanks.

Source:
Printer Clinic

Dec 26, 2010 | Canon Office Equipment & Supplies

7 Answers

Canon MP560 ink level override


Just press and hold down the STOP button :) Works a treat :)

Dec 28, 2009 | Canon MP560 All-In-One InkJet Printer

1 Answer

My Canon i 560 s will not print and this is the error message, I followed instructions, no change, won't print, yellow light flashes ,"Operator error. Press the printer's RESUME button. If this doesn't...


Turn off your PC, turn off the printer. Open the printer and check for paper jams, push/pull the ink cartridge carrier left to right to ensure it also isn't jammed.

Only use a small amount of paper (10 sheets). Too much paper can sometimes block the feeder

Turn everything back on, try again.

Jul 02, 2009 | Canon BubbleJet i560 InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1972 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...