Question about Chamberlain Powerdrive PD422D 1/2 HP Security Plus Screw Drive Garage Door Opener

1 Answer

My stanley deluxe garage door opener suddently stopped. It only makes tik tik sound. What do i do?

Posted by Anonymous on

  • Anonymous Mar 22, 2014

    door opens slowly and makes a beeping sound

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 143 Answers

You may look at the safety sensors. Try holding the wall button down. If the door operates with the button held down then it is the sensors. Try to align them to look at each other. If not you are probably looking at either replacing the sensors or the logic board. Thanks BB

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I NEED THE MANUAL FOR MY STANLEY 8500.51 GARAGE DOOR IT WON'T CLOSE


Try searching around here to find similar or hopefully exact opener. Stanley no longer is in the garage door business, and the company that bought them out went bankrupt.
Good Luck
http://www.teknuw.com/garage-door-opener-installation-manual/stanley/

Feb 23, 2015 | Building Materials

1 Answer

How do I put my chain back on a Stanley 8500 Garage door opener?


First you must make sure the sprocket on the garage door opener is spinning clockwise and reaches its limit and stops, you can easily put a pair of pliers between the #1 and #2 terminals on the garage door opener and start the sprocket spinning or just grab a remote and watch from the back of the unit (looking towards garage door ) and make sure it,s direction is clockwise, Once it stops you wanna loosen the chain enough so you can position the carriage which is connected to the chain and with your door closed send the carriage down far enough so that the carriage and the trolley both engage then all you have to do is put the chain over the sprocket and tighten up the tensioner that is located on the trolley...not to tight and not to loose is what you would want in an adjustment !....now since you already ran the sprocket in the down position your door is now ready to test ...when you press your remote or wall station the door will travel up, You have to do it this way , if you don,t ..you can damage the machine or your door ! Good luck and hope I was able to help you with your dilemma!

May 07, 2014 | Stanley Building Materials

1 Answer

Stanley 810 deluxe garage door opener what remote can be used


Try this place. They list an 800 number you can call.

http://www.aaaremotes.com/

Sep 25, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Stanley garage door opener chain screw adjustment


THE ADJUSTMENT IS SUPPOSED TO HAVE A 2ND NUT THE TWO TIGHTEN AGAINST EACH OTHER AND ACT LIKE A LOCK

Apr 01, 2010 | liftmaster Chamberlain Garage Door Opener...

1 Answer

My garage door will only open about 12 inches and then stops. I have stanley electric door with a craftsman 1/2 electric starter


Check the door springs. Sounds like one could be broken. You might also remove the cover to the opener and check the drive gear. It could be stripped.

Nov 19, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Programming my 98 blazers Garage door button on dash to a stanley


Here is some programming info for the Stanley.

http://www.aaaremotes.com/standualcodl.html

The programming information for your Blazer should be in the owners manual.

Aug 18, 2009 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Chamberlain Powerdrive PD422D 1/2 HP Security Plus Screw Drive Garage Door Opener Logo

597 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chamberlain Car Audio & Video Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

21550 Answers

Are you a Chamberlain Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...