Question about HP Pavilion s7310n (EN996AA) PC Desktop

2 Answers

Scsi/raid host controller

When i power on my HP pavilion s7301n i get a found new hardware prompt. It tries to install drivers for a scsi/raid host controller that fails. In the task manager it shows an exclamation mark over the controller and under that it has this identifier...a7dpmlyg. In the details it shows code 39. I have tried finding the drivers, uninstalling and locating the drivers, rolling back the drivers, and a system restore. I have noticed since it started doing this that my keyboard will fail all together, work only once windows fully loaded, once windows fully loaded and keyboard working the q r t y will not work. I run XP service pack 3, the system is just like it was from the factory except for replacing the power supply a couple years back. Please anyone have any ideas on this?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 20,706 Answers

Redux1
its old
hp.com has no driver page. now.
end of life for that and XP for 3 years now.
so....
join the HP.forum
then ask for the correct SATA driver
post your PCI codes.
click CP
click DM
click your bad, SATA chip driver.
below is NIC, example, only
then post them on hp link in my 2nd post;

like this.scsi/raid host controller - 91e9b7e0-391e-4e3e-8c90-fab2bc01777b.jpg

Posted on Mar 22, 2017

  • _-__-___-_
    _-__-___-_ Mar 26, 2017

    also if you id the maker of chip and number
    we can go to THAT maker, (intel, AMD, via, nforce, and others) and get a driver
    from them, that matches at least 1 OS.
    on old gear with zero support
    that is the ONLY way.
    if you use web sites called drivers-blabal
    you will be sorry. very sorry.
    all such sites are infected or worse.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • HP Master
  • 22,114 Answers

If you don't run raid, remove the drivers and link to the controller. If you do, the driver may be corrupt. Try running a registry cleaning programme like Advanced System Care.
Speed Up Slow Computer Keep PC and Internet Secure Freeware Download IObit

Posted on Mar 19, 2017

  • 2 more comments 
  • Anonymous Mar 23, 2017

    cant run raid with one SATA jack,MOBO
    1 for hdd /sdd
    1 for CDROM
    what he has is the WRONG DRIVER. intel driver is wrong.
    why is the only question.

  • Anonymous Mar 23, 2017

    the cure is a real HP.com driver for your HP system.
    but they are gone now at HP, I say retire it.

    ---------------------------------------------------
    HP Pavilion Slimline s7300 Desktop PC series - Retired ProductsThe following products have been retired and are no longer supported by HP. All official HP support content for these products has been removed from this web site.

    HP Pavilion Slimline s7310n Desktop PC

  • _-__-___-_
    _-__-___-_ Mar 23, 2017

    leaving intel.com
    right?
    i run a pCI scan program to find the real name of the SATA chip. intel.
    then get it from intel.com
    that is what I do but i cant do that for you.

    xp -sp3 omg

    im reading your data sheet for you on your PC

    i start here, teaching how to fish is my bag

    check this out, see raid uninstall here.
    i see HP had this tool but most sites are selling it and there software is loaded with viruses.
    best it to backkup your own drivers beFORE
    HP ends them after 10years.
    you are too late.

    here is a way
    login here
    then post your PCI codes to them
    like others here
    and ask for SATA drivers
    http://h30434.www3.hp.com/t5/forums/sear...



    i think this is the only way.

  • _-__-___-_
    _-__-___-_ Mar 23, 2017

    there seems to be a raid driver uninstall back at HP many years ago
    i see the echo from big bang....

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

map9966
  • 2351 Answers

SOURCE: HP PAVILION a220n Ethernet and SM drivers problem

Don't buy anything just yet. The HP software for your Pavilion a1220n is listed on HP's sit for free. If you want you can download all the driver software & burn it to a CD/DVD.
Here: http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&dlc=en&product=1130585&lang=en
Install first,
Driver for the SM Bus Controller which is your chiset drivers are here as:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-35788-1&cc=us&lc=en&dlc=en&product=1130585&dlc=en&lang=en
Driver for Ethernet Controller: Fall 2005 Original Realtek LAN Drivers
Just in case. Intel® 915GV Express Chipset - ICH6 south bridge: http://www.intel.com/design/intarch/software/driver/#915gv

HP Pavilion a1220n Desktop PC - Product Specifications
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00485641&cc=us&lc=en&dlc=en&product=1130585&dlc=en&lang=en

Posted on Dec 31, 2007

  • 359 Answers

SOURCE: Conexant audio contoller nuisance!! AAARGH!! HP Pavilion dv1000

The best way to deal with the outdated HP update is to have an online chat with HP support - it is their software and their machine that is causing you problems. If you go to the support page for your machine, you should be able to find "Contact HP" at the bottom of the page. This should lead you to an online chat option, which I would suggest to be the best way to deal with the uninstall issue. Even if you locate the proper driver through device manager, this will not solve the uninstall problem. HP techs have numerous tools available to them that they do not share with us as users of their products...

As an alternative, if you have system restore turned on, I would recommend going to a restore point prior to the time the driver (sp) was installed. This would solve the uninstall problem, if there is a working restore point available to you. Of course, we all know that doesn't always work either, but it works more often than not, so long as the function is enabled. Then you may choose to contact HP for the proper driver, or seek it out.

In order to search for a newer driver, you should take note of the version that was installed by the HP sp (which you could try to reinstall just in case the download was faulty). After making sure you are aware of the exact equipment and the driver that did not function properly, it is generally useful to obtain the driver from the manufacturer directly if possible. There are other alternatives with MS update catalog, or with several web products which will scan your system and update drivers for you. If you wish to pursue these and need more assistance along those lines, please post back.

If this information assists you in resolving the problem, please take a moment to rate the solution at a "FixYa" level. If you do not feel that you can rate at a "FixYa", please post back with more information regarding what has occurred subsequently and/or more details regarding the situation, and I will gladly help you until we have reached a definitive solution. Thank you for using and rating FixYa!

Posted on Sep 27, 2008

  • 11 Answers

SOURCE: Raid 0 on Intellistation 6221?

That particular work station comes with both IDE and SCSI drive interface controllers. The IDE drive should be used for your OS. The SCSI drives for your data storage. Now, the issue is to get the SCSI to work in RAID_0 as I understand.

You iwll need a RAID controller such as Adaptec AHA-3940AU WD SCSI Host Controller, which may be found on eBay (used) for a very affordable price. The driver software may be downloaded directly from Adaptec, so I suggest you do that in the iterim peroid, and store drivers on a USB thumb drive.

Hope this helps you.

Posted on Dec 29, 2008

joecoolvette
  • 5660 Answers

SOURCE: HP Pavilion a1150y fans run when powered on but

Believe it or not, it's due to a weak power supply. More specifically, weak voltage rail/s caused by failing Electrolytic Capacitors.

A bad computer power supply is about 70% of computer failure.

ALL the light use less than 1 Watt. EACH fan uses 2 to 3 Watts.

A processor uses 55 to 125 Watts. Depends on the make and model.

Since the power supply is weak, it doesn't have enough power to turn the processor on.
No processor, nothing to find the Boot record on the harddrive. Nothing to get the Operating System going. (Example: Windows XP)

No computer running, there is no signal to the monitor.
Just enough power to light lights, and spin fans.

Posted on Apr 13, 2009

  • 7 Answers

SOURCE: Unable to reinstall DVD backups after HP SYSTEM RECOVERY failed

Code "purple" means you and your computer are done. It is an unrecoverable error that means you need a new system. However, I have found a couple of postings that claim to know a fix. I can not verify these methods, I do not own a HP or other type of prefab PC (custom is the only way to go). Anyway, here are the links, good luck.

http://h30434.www3.hp.com/psg/board/message?board.id=HardwareDPC&message.id=6115

http://forums.techguy.org/windows-nt-2000-xp/469752-code-purple-configuration-error-hp.html

http://forums.techguy.org/all-other-software/644163-code-purple-advice.html

Posted on May 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows keeps asking for driver for SCSI/raid host controller


Cancel and disable in Device Manager. If not in BIOS.

Sep 30, 2012 | ASUS K8N-E Deluxe Motherboard

2 Answers

Proliant does not boot from raid controller if external SCSI drive is powered on.


Try to disable boot to other device on your bios setting.

Make sure that your Smart Raid is set on the first boot device.

Nov 01, 2011 | HP Compaq ProLiant ML350 G3 Server

1 Answer

MY SCSI RAID HOST CONTROLER


You can right click on it and either roll back the driver or update. Usually if you go to www.update.microsoft.com you can search for updates. Always choose custom install so you can see what it is installing. Let me know what happens
seth

Jul 03, 2009 | ASUS Computers & Internet

2 Answers

SCSI/RAID Host Controller/Driver cannot be found


Windows cannot find the correct drivers for this device. So, let's research a little bit.

Are you using SATA or RAID on the computer? If not, there is nothing that needs fixing.

If you are, then reinstall the RAID software from your motherboard installation disk, which should repair this issue.

If you do not have the driver installation disk from your motherboard, for whatever reason, go to their website. Almost every motherboard manufacturer provides easy access to drivers.

good luck
tony

May 22, 2009 | Computers & Internet

1 Answer

Pci ide controller for third hard disk


You need to enter into scsi bios first, then do an autodetect for hard drive, this will set the IDE/SCSI hard drive on raid controller.

To enter SCSI control you need to press the same key stated on screen on startup (F6 I assume) I think F3 is just boot settings.

If the card do not enter regularly in CMOS settings for the raid then this card is defective.

Mar 28, 2009 | Sabrent SBT-RDIT PCI IDE Silicon Image...

1 Answer

Usb drive


If you go into Device Manager (through Control Panel), see if there are any yellow ! next to the usb controllers. If so, you will need to reinstall the drivers for the USB. Those drivers will be on your HP disk. If you don't have a disk, the drivers are universal and will be installed by Windows. If that doesn't work, try uninstalling ALL USB controllers and hosts and reboot your machine. Once it boots back up, you will be prompted with the Found New Hardware wizard which will want to install the USB controllers and hosts. That SHOULD solve your problem.



Please remember to rate my solutions! Thanks

Feb 05, 2009 | HP Compaq nx6310 Notebook

1 Answer

Raid 0 on Intellistation 6221?


That particular work station comes with both IDE and SCSI drive interface controllers. The IDE drive should be used for your OS. The SCSI drives for your data storage. Now, the issue is to get the SCSI to work in RAID_0 as I understand.

You iwll need a RAID controller such as Adaptec AHA-3940AU WD SCSI Host Controller, which may be found on eBay (used) for a very affordable price. The driver software may be downloaded directly from Adaptec, so I suggest you do that in the iterim peroid, and store drivers on a USB thumb drive.

Hope this helps you.

Dec 21, 2008 | IBM IntelliStation Z Pro 6221 PC Desktop

1 Answer

Unable to find Mass Storage Controller Driver


Hi koolkeef, your KT7A-RAID uses the KT133A chipset. You can find drivers for that chipset located at VIA's web site.

http://www.viaarena.com/default.aspx?PageID=2&OSID=1

http://www.viaarena.com/default.aspx?PageID=2

Happy hunting & good luck!

Mike

Apr 01, 2008 | Abit KT7A-RAID Motherboard

1 Answer

SCSI BIOS not installed / ML150G2, exchanged mainboard, RAID


hi..
my guess is no but since i haven't dealt with this type of server i'm going to suggest you go to hp.
if you just goto hp.com and search on live chat and a link will come up.. they should be able to help unless it's too old since i'm not sure what generation we are on now..

good luck, hope this helps a little..d

Feb 23, 2008 | Adaptec (2120S) SCSI Controller

1 Answer

Raid config problem


download a driver over the net

Feb 21, 2008 | HP NetRAID-2M SCSI Controller

Not finding what you are looking for?
HP Pavilion s7310n (EN996AA) PC Desktop Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...