Question about Whirlpool GHW9400 Front Load Washer

1 Answer

End of wash cycle (last 2 minutes,) F code, no spin & drain

At the end of wash cycle (last 2 minutes,) we get F code and washing machine quits with soaked clothes inside - does not spin & drain. Standing water left in washing machine

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 99 Answers

If your getting an FdL or F11 (and possibly others) code the problem is more than likely the CCU. The CCU is a circuit board at the inside top back of the machine. The board has quality issues in that it is prone to cold solder joints at the spot where the relays and the spade connectors for external connections meet the circuit board. The repair is to remove the board and touch-up those solder joints.

Posted on Oct 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My GE HE top load washer quit draining & spinning. I*t went through a wash cycle just fine. It drained & spun for that, but at the end of the rinse cycle it wouldn't. I even tried to put it on


WE HAD THE SAME PROBLEM. ONLY OURS WOULDN'T WORK ON THE "WHITES" CYCLE BUT WOULD WORK ON THE OTHERS. BUT IT WAS JUST A MATTER OF TIME BEFORE THEY WOULD ALL GO & THE REPAIRS WOULD BE $$$. YOU WILL EITHER NEED A REPAIRMAN & YOU'RE LOOKING AT A MINIMUM OF $200........IF YOU'RE LUCKY. DO YOURSELF A FAVOR & GET THE G.E. MODEL #GTWN2800DWW AT HOME DEPOT. LOOK AT IT IN THE STORE BUT BUY IT ON LINE (AS THERE MAY BE A $50 DISCOUNT). THIS WASHER IS WHAT YOU WANT. YOU WON'T BE SORRY.

Jan 11, 2015 | GE Washing Machines

1 Answer

Whirlpool cabrio (4yr.old) making loud motor straining noise on final spin cycle.


Hi valued Consumer, We would like to inquire further about your post with you. Please respond back to this email address Whirlpool_Reviews@Whirlpool.com with your name, user id (Valued Consumer), phone number, street address, zip code, reviewer name, model & serial number, and date of purchase on the appliance.

Apr 24, 2017 | Whirlpool WTW6400SW Cabrio Washer

1 Answer

Wh60f60w1


Just had the exact same issue with my F&P it would stay in the drain cycle(without draining). It would show 2 minutes left in the cycle, dropping to 1 minute, but would never complete the cycle.
For some reason the machine would not drain the water from the drum and would continually remain in the drain cycle, spinning the load(back & forth), but not draining the water.
----------
This is how I sorted the machine: -
1. I turned off & unplugged the machine.
2. I drained the machine manually. Opening the manual drain compartment located at the bottom right of the machine.
a). Firstly drained the majority of the water using the small black hose into a plastic container(ice cream container will be fine). Took a little while as the machine was quite full and I also didn't want to flood the laundry.
b). Once I had drained most of the water I undid the filter plug to drain the remainder of the water, which wasn't too much & was able to mop up with a towel. I gave the filter a good clean, removing as much build up in there(which in actuality was very little lint, gunk, etc. Though I did find a small button & a collar stay wedged in there).
3). I blew very hard into the washing machine drain hose a few times(read this on another forum so thought I'd give it a try!). Use a plastic bag, etc. to cover the hose etc. for hygiene purposes :)
4). I then plugged & turned on the machine. The machine went straight back into the 2 minute drain cycle. It attempted to drain/pump remaining water, however this time machine successfully went through the 2 minute drain cycle. Machine stopped, counted down, click and I was able to open the door.
I put the washing through a rinse setting to see whether the machine would complete cycle. I can happily report that the machine completed the rinse cycle on the washing with no issues. I also put through another load to see if it would complete a full wash cycle, which I can report it happily did so.
This may have just saved me a grand$ :)
Good luck.
cheers
Monkeyboy :^)

Apr 28, 2013 | Washing Machines

1 Answer

I have a Bosch WFMC330SUC that does not end the cycle, it just keeps starting over. I assume it is a bad control board, but they are $300+ and I'd probably replace the machine instead. Any suggestions?


Hi wwwylie,

First check the Drain Pump filter, as the last 2 cycles of a machine is Drain & Spin, and if the Drain pump cannot drain the water, the filter may be clogged and the cycle won't progress to spin.

Please follow my below Tip on how to do this:

ACCESSING, DRAINING & CLEANING THE DRAIN PUMP FILTER...

Kind Regards

JEDEMEYER1

* If this solution helped you, please rate it

Aug 16, 2011 | Bosch Nexxt 500 WFMC3301 Front Load Washer

1 Answer

Kenmore HE2 won't finish spin cycle


you have blockage in you drain plug. to solve this problem you'll have to remove the lower front panel of your machine by removing the 3 (1/4") screws on the vary bottom of the machine. once the panel is removed you'll see a 1 1/2" white PVC drainage plug. turn the inner plug to the left in till open. (WARNING ALL THE WATER IN THE DRUM WILL DRAIN THOUGH THIS PLUG) remove debris likes socks or everything that's there replace the panel and your all set.

May 28, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Maytag neptune mah8700. Will spin at the end of quick rinse cycle but not on any other cycle. Error code I get is SUSP. Washer does drain out.


Hi
My name is Gloria, my neptune washer will not spin on the last spin cycle of any of the washing cycle. A code of uC comes up.

Aug 08, 2008 | Maytag Washing Machines

Not finding what you are looking for?
Whirlpool GHW9400 Front Load Washer Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2128 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...