Question about Sanyo VHR-H607 VHS VCR

1 Answer

How change RF channel in Sanyo VHR H772 - Sanyo VHR-H607 VHS VCR

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sanyo Master
  • 5,126 Answers

Is there a small screw on the back near the aerial? If there is it's the RF adjuster. Turn it slightly. You will then need to retune the TV. It's best to have a video of something running so you know what to look for. If the VCR doesn't have a screw at the back, the RF adjustment will be on a menu somewhere.
You might need to retune both VCR till you get clear of any broadcast station. I must point out that if the TV has a scart socket you will get a much better picture from that. If it has only one and you have other things connected, get one of the scart switching boxes (Amazon). It will solve any connection problems.


How change RF channel in Sanyo VHR H772 - cc40854.jpg

Posted on Jul 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot change rf modulator number for sanyo vcr model vhr-789e it is stuck on number 23


(if you ever see this) you need to pop open the top of the VCR and there is a reset button on the side of a small box on the inside that box is the RF modulator

Apr 29, 2009 | Sanyo Televison & Video

1 Answer

Need to retune Sanyo VCR VHR-610.


On the Sanyo VHR-610 you start the TV auto tune by holding down both the CHANNEL ( +, - ) buttons on the VCR simultaneously for more than 2 seconds.
The TV stations in your area will be automatically preset in order starting from programme position number "01"

When all available stations have been preset, the function will stop and the TV station preset to programme position number "01" will be tuned on your TV screen.

In other words after holding down the two buttons, leave it alone for awhile (takes some time) till it ends back at 01.

Cheers

Apr 07, 2009 | Sanyo Televison & Video

1 Answer

I can't get my cable to run through my sanyo vhr 5428 to display


You can't press enter without the remote. Your only hope is to go on eBay and search for the very same remote control. Be patient and check for a couple of weeks if you have to. Especially now that it's Christmas a lot of people will be selling their old remotes on eBay.

Dec 24, 2008 | Sanyo VHR-5428 VHS VCR

1 Answer

Sanyo VHR-M291


This unit needs new rubber parts. I don't know the particulars of your model, but it has drive belts and/or an idler assembly that needs to be replaced.

Dan

Oct 01, 2008 | Sanyo VHR-H531 VCR

1 Answer

Sanyo vcr VHR-9433


Your end of tape sensor is not working. Notice the beginning and end of each tape is clear? That is to allow IR (infared light) which you cannot see with out special stuff, into the area near the left and right of the cassette. Usually they look like a tiny light bulb wit a left and right side. Radio SHack carrys IR detectors cheap.

Jim

Sep 27, 2008 | Sanyo VHR-9433 VHS VCR

1 Answer

MY VHR IS DEAD


Sounds like you need a vhs head cleaner,,itll clean it up ,,picture will clear out,, good luck

Sep 26, 2008 | Sanyo VHR-H607 VHS VCR

1 Answer

Getting a dvd player to record vhs to dvd


The RF converter takes the Red/White/Yellow as INPUTS and converts them to either channel 3 or 4. You need to go the other way. You need a tuner or another VCR to convert from RF (channel 3 or 4) to a standard AV signal (Red/White/Yel).
Dan

Mar 19, 2008 | Sanyo VHR-5431 VHS VCR

2 Answers

Tuning Sanyo VCR


Press both channel buttons simultaineously for 3 seconds it will automatically tune your programmes press ok when ok flashes on vcr screen display

Nov 04, 2007 | Sanyo DS27910 27" TV

1 Answer

SANYO VCR Model VHR-777E


Try this link to get your users manual: http://www.manualsparadise.com It has a wide selection.

Sep 10, 2007 | Sanyo VHR-5431 VHS VCR

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

 Grubhead
Grubhead

Level 3 Expert

5126 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...