Question about E-Machines eMachines Desktop PC

2 Answers

Need wiring diagram for emachines t2200 motherboard

I need a wiring diagram showing the power hookups for an e machines t2200 the previous owner pulled them off without labeling them and we cant figure out where they go

I have an emachine that is a 1900+ series and need to know how to wire the power supply. I don't see a place on the motherboard for the 12v 4 pin connector.

Posted by on

  • 4 more comments 
  • Anonymous Jun 09, 2008

    I have a E Monster 500 that was given to me,but everything was taken loose inside.I now have 2 wires that I can't figure out where they go.1 is 4 wire,red,white,& 2 black.The other is 3 wire,red,white,black.Can anyone tell me where these wires go?

  • Anonymous Aug 05, 2008

    ON off switch wires

  • pawn3d Oct 11, 2008

    t2042 wiring diagram needed.

  • chadillac78 Dec 25, 2008

    i have an emachines t2862 and cant figure out what order the pwr switch pwr led and hdd led wires plug into can any one help how do i determine what motherboard is in this cpu

  • Anonymous Dec 25, 2008

    pc won't start up

  • ToolsnTrains Dec 31, 2008

    i have an emachines t2862 and cant figure out what order the pwr switch pwr led and hdd led wires plug into the motherboard. On the motherboard, there are 4 sets of 2 pins and 1 set with 1 pin. Can any one help how do i determine what order the 3 plug into the board, starting with the single pin?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

If you are replacing the power supply and it has 4 pin 12v conector and your motherboard doesn't, just disregard the 4 pin plug. The 20 pin conector will supply sufficient power for the processor. Many of the older motherboards did not have a separate 12v supply for the processor.

Posted on Apr 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need wiring diagram for my emachine t2042! I can't figure out where the red/white, green/white and black/white wires go!

I already know where the power supply wires go, everybody does- they're all the same!

Posted on Oct 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Emachine T2200 power light yellow (not green) fan working computer does not. Any ideas?


yellow normally indicates sleep or hibernate, have you tried to press keys on the keyboard to see if it wakes up? have you tried just pressing the power button once?

May 03, 2012 | E-Machines eMachines Desktop PC

4 Answers

Need a motherboard diagram for an emachines w3503 .


The eMachines W3503 uses an Intel D101GGC motherboard.

eMachines Support isn't going to show you squat.

This is Intel Support, and the download page for the Motherboard Manual, for the above motherboard,
(It's a PDF file. Give it time to download)

http://www.intel.com/support/motherboards/desktop/d101ggc/sb/CS-021718.htm

On the above page left-click on -

English Product Guide [PDF}
(In blue)

Need some information about that motherboard, or how to understand the Front Panel header pinouts on the motherboard, state in a Comment.

Oct 03, 2010 | E-Machines eMachines Desktop PC

1 Answer

I NEED TO KNOW HOW TO CONNECT THE POWER SUPPLY FOR AN EMACHINES T1120 COMPUTER. CANNOT FIND A SCHEMATICS DIAGRAM ANYWHERE.


After reading an article about Emachines awhile back, I found out the reason you can't find the schematic- it isn't available, as some motherboards are made specifically for Emachines and therefore not distributed, as they might normally be, but again, others are, but you have to identify them and go through another source to get them- Emachines, appartantly, will not supply them. All is not lost, however...all motherboards have, basically, the same hookups and connectors for the power supplies, hard drives, etc.- they are standard. I found a web blog that explains the power switch, reset, and power led, which will help. Here it is: http://www.computing.net/answers/hardware/emachine-power-sitch-wiring/56545.html
This site will explain about the 24 pin connector from the power supply
http://www.tomshardware.com/forum/53750-7-installation-manual-rs480m-w3400-emachine-motherboard
If you google "motherboard wiring" you will find sites that have illustrations of the motherboard, and explain which connectors go to which sockets, and how to identify them.
With a little patience and determination, you should be able to hook everything up from the various blogs on the net. Hope this helps.

Apr 17, 2010 | E-Machines eMachines Desktop PC

1 Answer

Need wiring diagram for eMachine 20030812 motherboard!!!


You should be able to see the words/letters that go with the jumpers on the motherboard itself. look around the jumper settings area for power, pwr etc. and match them up with your jumpers which should have what the go to on them.

Apr 10, 2009 | E-Machines eMachines Refurbished EMA...

1 Answer

A power diagram for restoring power for a emachine


Hi there if you look real closley at the wires they are labled such as (pwr)led (reset) (hdd led )
(remote switch this the power for the computer) ect ect now look real closley and you will see the same markings on the edge of the board by each pin that they go to.. or you can also contact e-machines tech support and they will be able to help you out more if needed
best regards mike

Mar 17, 2009 | E-Machines eMachines Desktop PC

1 Answer

Powerbutton connection wires were disconnected from motherboard


Look in the manual there is a diagram and pin connections for each wire.

Feb 06, 2009 | E-Machines D2046 PC Desktop

1 Answer

Emachines t3830 I need the schematic for MB I umployed the wire for the push bottom without looking at the way they were plug. Now I do not know the correct aligning of the push bottom wires.


If you look at the motherboard there is usually a diagram labeled "FRONT PANEL HDR" that will tell you which pins are for: HDD LED, PWR LED, RESET, PWR ON. etc.
The chart / diagram may be a few inches away from front panel header.
the following example is from my emachine T2893 that I had opened because it won't power up.

the motherboard at the header connector labels pin #2 and with that you can figure out the other
pin numbers

example of diagram on motherboard (Confirm the pin numbers on your motherboard)


J9G1 PINS
| HD LED | 1 - 3 |
| PWR LED | 2 - 4 |
| RESET | 5 - 7 |

| PWR ON | 6 - 8 |

Hope this helps you figure which pins to hook you switch up to.

Jan 18, 2009 | E-Machines eMachines T3830 PC Desktop

4 Answers

Emachines 220 motherboard IMPERIAL_GV 20030812 driver


i need to download on board driver of imperial_GV 20030812

Mar 25, 2008 | PC Desktops

3 Answers

LOST POWER ON MY COMPUTER.


You can place your hard drive into an External Hard Drive Case and transfer your files on another system (this would be cheaper than having a repair shop do a ‘data-transfer’).

Nov 10, 2007 | E-Machines T2200 PC Desktop

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

3,929 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...