Question about Pioneer VSX-518-K Receiver

1 Answer

My pioneer vsx-519V-k amp won't turn on. Just bought it about 4 months ago. we were using it with music and a microphone when it conked out and won't turn on anymore. Have checked the power source, the amplifier connecting cable and found in good nick and working, Any suggestions? Also anyone know where I can get a repair or service manual for the pioneer vsx-519V-k amp

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pioneer Master
  • 17,130 Answers

Have you checked within the set, the fuse and if the standby circuit is working. thre could be a failure of this sub votage which is required for the switch on of the main power. If you do not have any standby indication you must check this section, however if you arre getting the standby you would have a failed output or a shorting that is triggering the error amp to swtich off. If you are familiar with the circuits you can check but I would suggest that since you will need more experience to look into the main board for tracing the fault. In such case check for the service centre nearest to the place you are in using a google search for Pioneer - Audio systems- sevice. Helpful I hope. Good day.

Posted on Jul 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer vsx 519v... My amp wont let me select adv surround?


does in show anything on the display when you press the advance surround button?

Jul 08, 2013 | Audio Players & Recorders

1 Answer

VSX-D308 Pioneer Receiver


You most likely have a shorted amp IC.

May 04, 2013 | Audio Players & Recorders

1 Answer

Pioneer VSX-40 won't power on


check the fuse or ic regulator

Feb 26, 2013 | Pioneer VSX-D307 Receiver

1 Answer

My Pioneer Receiver VSX-519V has a blinking HDMI light and won't show video.


You guys mentioned the reset via the front panel, and I tried that with this very same issue on my VSX-822-k and it worked!
thought I would post the instructions for anyone else that lands here:
Reset the main unit if the receiver is generally not operating correctly. Switch the receiver into standby mode. Hold down the "BAND" button while pressing the "STANDYBY/ON" button for about two seconds. When "Reset?" appears in the display window, press the "AUTO SURROUND/ STREAM DIRECT" button. "OK?" appears in the display window. Press "STEREO/A.L.C." to confirm. "OK" appears in the window. The system has been reset.

Oct 28, 2012 | Pioneer Vsx 519v-k 5.1 Home Theater 550...

1 Answer

Pioneer VSX-519V Multi-channel receiver won't turn on.


You could have blown the fuse in the unit, or worse still blown the output device(s) in the power amp.

Dec 30, 2017 | Pioneer Audio Players & Recorders

1 Answer

App err


PDF]VSX-D414 VSX-D514 - Pioneer

www.pioneer-latin.com/downloads/xre3077a.pdf
Increase the separation between the equipment and receiver. - Connect the .....AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-D514. RCE. VSB. MODE.

Pioneer VSX-D514 Receiver Repair Questions,... - Fixya

www.fixya.com > Forum > Audio & Video Receivers > Pioneer
Recent Pioneer VSX-D514 Receiver questions, problems & answers. Free expert DIY tips, support, troubleshooting help & repair advice for all Audio & Video ...

app err Turns on then says amp err. - Fixya


Jan 26, 2012 | Pioneer VSX-D514 Receiver

1 Answer

Turn it on and it turns back off


it sound like the dsp ( digital sound processing) board is not working, take it to your nearest pioneer shop and get them to take a look at it, hope this helps

Dec 26, 2011 | Pioneer Audio Players & Recorders

1 Answer

Hi I want to add 2 extra speakers (for outdoors) to my Pioneer VSX-519V and see in the manual that I require a separate amplifier. Why is that necessary & if so can you recommend one please ? Thank...


Technically, you dont need an additional amplifier to run another set of speakers. This amplifier has a second zone output option. What you need to do is connect your outdoor speakers to the second zone on the reciever, than you can turn it on and select the desired source from your remote.

Jan 03, 2011 | Pioneer Audio Players & Recorders

1 Answer

My pioneer vsx-519V-k amp keeps turning off when I, turn the volume above 50 db


check audio ic & component like resistors & capacitors. good luck!

Apr 26, 2010 | Pioneer VSX-518-K Receiver

Not finding what you are looking for?
Pioneer VSX-518-K Receiver Logo

2,425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5342 Answers

John
John

Level 2 Expert

509 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...