Question about Canon PIXMA MX320 Color USB InkJet Printer

1 Answer

Printer not working.

Hello, My printer problem is when print or copy, display be shown "The ink absober is full". so what i can do to solve this problem. thank you

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,219 Answers

Start the printer in the service mode.
i. With the printer power turned off, while pressing the Stop button, press and hold the ON
button. (DO NOT release the buttons).
ii. When the Power LED lights in green, while holding the ON button, release the Stop button.
(DO NOT release the ON button.)
iii. While holding the ON button, press the Stop button 2 times, and then release both the ON
and Stop buttons. (Each time the Stop button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
Without the scanner (connect the operation panel unit.);
While holding the ON button, press the Stop button 3 times, and then release both the
ON and Stop buttons. (Each time the Stop button is pressed, the Alarm and Power
LEDs light alternately, Alarm in orange and Power in green.)
iv. When the Power LED lights in green and "Service Mode Idle" is displayed on the LCD, the
printer is ready for the service mode operation.

Start the Service Tool on the connected computer.
i. When a button is clicked in the Service Tool dialog box, that function is performed. During
operation of the selected function, all the Service Tool buttons are dimmed and inactive.
ii When the operation is completed, "A function was finished." is displayed, and another
function can be selected.
iii If a non-supported function is selected, "Error!" is displayed. Click OK in the error message
dialog box to exit the error.

(7) Main Main ink absorber counter
resetting
Set a sheet of A4 or Letter sized plain paper. After
the ink absorber counter is reset, the counter value
is printed automatically.

(8) Platen Platen ink absorber
counter resetting

Posted on Jul 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix ip 4940 printer ink absober full problem


Open the printer carefuly remove the ink absober located under the head cleaning mechanism, wash it with water and liquid soap, dry it and re use againg. If you have new absober just replace.

Jan 11, 2015 | Office Equipment & Supplies

1 Answer

Ink absober full


type in google your printer model and the error code or "ink absorber full" and check the solutions.
You also may search in these blogs:
http://resetcanon.com/

http://fix-your-printer.blogspot.com/

Jul 23, 2012 | Office Equipment & Supplies

1 Answer

How can i solve ''absober full on pixma mp160.''??


Greetings,

If your ink absorber is reporting full, you need to take it to a Canon service center to have it replaced and have the counters cleared. When you clean your print heads, the ink is stored in this absorber and it gets full over the lifetime of your printer. Go to the following link to locate a nearby service center.

Thanks

http://www.usa.canon.com/consumer/controller?act=ServiceLocatorAct&fcategoryid=257&modelid=11993

Apr 18, 2011 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

The ink absober is full


can you give me more details?
what printer is it?
you display an error?

Basically you need to unzip the printer and clean with warm water, waste tank, let it dry, then install the printer back.
need to know what you print out that I need to reset the error, waste tank full

Mar 09, 2011 | Office Equipment & Supplies

2 Answers

Ink absober is full


Eight flashes: Waste ink absorber almost full

The printer has a built-in waste ink absorber for the ink used during Print Head cleaning. Eight flashes indicates that the waste ink absorber is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink absorber becomes completely full, contact a Canon service representative.

Important

Canon recommends that you call for service as soon as this error occurs. Once the waste ink absorber becomes completely full, printing will no longer be possible

Jan 11, 2011 | Casio Office Equipment & Supplies

3 Answers

Ink absorber almost full


Need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2
After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.

Hope this guide can help fix your problems

Extra download
Fixwasteinkabsoberflowip1000

Jul 20, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

There is a message that ink absorber is full and contact tne service centre.


Need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2
After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.

Extra download
Fixwasteinkoverflowip1000

Jul 02, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

My canon ip1980 appears error 5100 on my display i will replace my data strip but the problem still occurs. What should i do. Tnx


This problem is between waste ink absober full and ink cartridge.
Firstly your need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2

After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press that door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.
----------------------------------------------------------------------------
IF after reset your waste ink absober full, problems still apppear error5100
> change your ink cartridge with the working cartridge

usually error e5100 due tow problems above

Hope this guide can help fix your problems

Extra download
Fixwasteinkabsoberflow



Jun 23, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

The printer display shows the waste ink tank absorber is almost full.


INK ABSOBER
After replacement:
1. Reset the waste ink counter.
Adjustment / Settings,
Waste ink counter setting]
- EEPROM information
print

Oct 08, 2009 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MX320 Color USB InkJet Printer Logo

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1985 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...