Question about Motorola Mobility RAZR V3
Hello,
1 charger
2.battery
3.charging port
There are three ares to look at,
There are three different things you can try to determine the real problem of your phone, firstly, try use a similar charger to charge the phone to see if it will hold charge, if it does, it means your charger is bad, get a new charger. secondly, another area you will need to look at is removing the battery on your phone and charging the battery of your phone with a similar phone to see if the phone will charge the battery and hold charge, if it did not, it means the battery of your phone is bad and will need to be replace, lastlt, check, the charging port of your phone might be malfunctioning and not charging your phone, if the two above look good, it means the charging port is the problem, replace the charging port and you will see that your phone will hold charge.
Take care.
Posted on Jul 06, 2010
Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!
Posted on Jan 02, 2017
Jan 20, 2018 | Cars & Trucks
Feb 02, 2016 | Health & Beauty
May 06, 2015 | Cell Phones
Feb 20, 2014 | Yamaha XJ 400 Motorcycles
Nov 16, 2012 | Electric Jazzy 1115 Power Wheelchair
Charge you're the batteries to your Wii remote by opening the back clip and pulling out both AA batteries. If the batteries are the standard set that came with the Wii, you should upgrade them to rechargeable batteries to save time, money, and garbage waste.
Let the batteries charge for as long as the charger says. In most cases a full charge could take 6 to 12 hours, but fast chargers can fully charge batteries for an hour. Check the charger's manual detailed times.
Use a Wii Charging station for easier charging access. These stations avoid the process of opening and closing the Wii remote every time you need to charge the batteries and they work as a Wii remote stand as well.
Place the batteries back into the Wii remote once the charging has completed. With both the charging stations and rechargeable batteries, lights should indicate when the charging has completed.
Power up the Wii and press any button on the Wii Remote in order to turn it on and connect with the Wii.
Press the "Home" button the Wii Remote control. This button is in the center of the controller and features a small picture of a house on it. A pop-up menu will appear over the screen.
Look at the menu and find your controller number. Right next to the assigned number is a remote battery meter. It will feature 1 through 3 bars to indicate battery level. If it has 3 bars, then the Wii remote is fully charged and ready for use. If it has any less bars then the remote can be used, but is not fully charged. If the battery meter is in red, the remote will shut off soon because there is not enough battery power.
Dec 06, 2011 | Nintendo Wii Console
Jul 06, 2009 | Motorola Mobility RAZR V3x Cellular Phone
Jan 29, 2009 | IBM ThinkPad T41 Notebook
Dec 01, 2008 | Motorola Mobility MOTOKRZR K1 Cellular...
Jan 13, 2008 | Motorola Mobility MOTOKRZR K1 Cellular...
Oct 09, 2016 | Motorola Mobility RAZR V3
347 people viewed this question
Usually answered in minutes!
×