Question about Kodak Easyshare CD82 Digital Camera

1 Answer

Kodak Easyshare CD82 lens error 111

The camera is a Kodak Easyshare CD82
And the error is a lends error 111
Can you help me?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on Feb 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lens error 211


Here are troubleshooting steps for a lens error.

and here's a video summary of the steps:

Jan 23, 2013 | Kodak Easyshare CD82 Digital Camera

1 Answer

Easyshare cd82


Hello Bob, Sounds like drive assembly failure, the plastic gears strip and the pieces jam the drive motor assembly. No battery will help this problem. This is a high dollar repair.
Best Regards, Russell

Dec 29, 2012 | Kodak Easyshare CD82 Digital Camera

1 Answer

I have a kodak easyshare cd82 camera an it keeps saying error 117. how do i fix it?


clean the lens guide like. USe compressed air on the lens body, tap the lens face down position and then turn on and see the result.

Aug 12, 2012 | Kodak Easyshare CD82 Digital Camera

1 Answer

Kodak Easy Share Camera C160 -keep going on and off code 211


This error message is related to a lens error from the information that I could find. In these instances it will typically require the repair or replacement of the lens assembly. I would find a local electronics store that can give you an estimate for free, but ultimately weigh that cost against the cost of purchasing a new camera.

Sep 08, 2011 | Kodak Easyshare CD82 Digital Camera

1 Answer

My Kodak EasyShare CD82 is giving me an Error 111, what happened and how do i fix this?


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Dec 03, 2010 | Kodak Easyshare CD82 Digital Camera

1 Answer

How do i fix the lens error 111?


for me when i was getting the lens error 111, the lens shutters were set crooked and was able to move them slightly and the error went away and the camera works fine now.

Nov 01, 2010 | Kodak Easyshare CD82 Digital Camera

1 Answer

Lens error


Problem: dust in the gaps near lens which makes it jammed. Effect: the sceen shows blk color. Solution: just blow over it or vaccum it.

May 17, 2010 | Kodak Easyshare CD82 Digital Camera

1 Answer

EasyShare CD82 non-responsive - Lens stuck open


Hi there its a problem of lens guide pin. may its damaged or dislocated. Its a possiblety of company manufacturing default. So repair or replaced that. Its till under werranty. Thanks. bd4ebca.jpg
20734aa.jpg

Apr 02, 2010 | Kodak Easyshare CD82 Digital Camera

Not finding what you are looking for?
Kodak Easyshare CD82 Digital Camera Logo

Related Topics:

588 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...