Question about RCA 24V510T 24" TV

1 Answer

New tv won't set up channels

Model # 24V414T

We go through the entire set up. . .analog chanels and digital channels. . . (we don't have digital) The screen goes to the beginning channel 3 and does nothing. If I forward the channel, the screen goes black and will sometimes go to standby. This is the second tv set because the other one blew its picture tube. Now this one won't even set up.

Help!!!

Posted by on

  • Anonymous Mar 30, 2014

    Setting up the channels and cable

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We are returning the tv to RCA and getting our money back.

Posted on Apr 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No channels received


This is an analog tuner tv there are no analog transmissions you need a digital to analog converter box to use this tv OTA. As tv transmissions are now digital.

Feb 19, 2014 | RCA F25422 25" TV

1 Answer

Does my RCA Model 24V414T television accept digital signals?


you will likely need a digital to analog converter box

Oct 21, 2013 | RCA Standard (CRT) Televisions

1 Answer

Can not tune tv since change over


The KV-32FS100 only has an analog tuner (NTSC). Unless there is a low-power analog station still broadcasting in your area, you will not be able to watch OTA stations. (I've got one in my area that barely comes in.) If your local cable still sends an analog signal, you won't need a set top box to watch that subscribed service.

Otherwise, you need a set top box to watch TV. A digital to analog converter (the boxes that were available with the government coupon before the switch over) will give you over the air stations. The basic models only provide SD output; there are a few HD models available. Otherwise, you can use a satellite reciever, cable box (for digital cable service), or something like the Boxee or Sling with tuner. (There are a few different models of the Boxee; one added a tuner with a USB dongle. The newest model of the Boxee has the ATSC tuner built in.)

Note: OTA digital signal quality is either a strong enough signal for the tuner or no signal will be present. You need to point the antenna in the correct direction to receive the signal from your local transmitters. The type of antenna and its placement will also change the number of watchable channels. You can use antennaweb.org or tvfool.com to get more information. Antennaweb assumes an outdoor antenna but gives a conservative list of stations. If the signal is split to several devices, you may need an amplifier to get a watchable signal. (Sometimes amplifiers fail and you won't receive any stations, so test without the splitter or amplifier by using a direct cable to one TV.)

I hope this helps.

Cindy Wells

Oct 26, 2012 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

How do we scan/program in local tv channels. We bought an external antenna, but get no picture. Typically, there is a protocol for scanning channels into the set. Model is Sansui TVS2746B, and the set was...


Okay, does this tv have a built in DIGITAL tuner? Most tv's only have an analog tuner. You can tell the difference while you are changing the channels. If the channel indicates 2.1 or 2.2 and so forth, it is on a digital channel mode. If you change the channel and it indicated 2, 3, 4, etc. it is analog. If it has digital capability change the input until you see 2.1, 3.4 etc. If you cycle through all the inputs on the tv like, input 1 (TV) input 2(DVD) input 3(HDMI) and so forth and you never see the digital channel you most likely do not have a digital tuner. You will need to purchase a digital converter which will convert it to analog and you can watch it by placing you tv on analog channel 3 just like the old vcr's. Hope this helps and please don't forget to rate this solution.

Jan 22, 2011 | Samsung TSL2793HF 27" TV

1 Answer

My tv is attached to a cable inpt but no cable box i am able to watch all cable channels by switching tv chanels,is the inpt digital or analog


The signal you are viewing is an analog signal.

The cable companies take the signals for your basic channels and resend them through the cable as analog so the customers that still plug the cable direct to their TV can still get some programming without the added costs of digital cable boxes on every TV.

This option will be slowly phased out over time but for now it is available.

Jan 08, 2010 | Sharp 13N-M100 13" TV

1 Answer

Is my polaroid TLX-04244B Digital


I checked out the manual for a similar model tv from polaroid...there's only one input for the coax cable from your antenna, so if the antenna's cable is connected to this input, this couldn't be the problem. What I do have trouble with on my own tv is that my indoor antenna location can make huge differences in recognizing all available digital signals. I could even have the antenna facing a different direction, and get different results. There are a few sites you can google for to find your distance from the broadcast towers, too. This might help to determine if you need a stronger antenna. It's a painfully long procedure to try different angles and positions for your antenna each time you run a channel scan, but this might be the only thing that would prevent you from picking up the digitals. I try the highest spot possible, and the one closest to the outdoors. Good luck, I hope you can pick them up soon! (Any antenna works...the industry tries to pass off "digital/hdtv specific antennas" to make a buck. I've used a cheapy rabbit-ears antenna and was able to bring in digital channels, as long as your tv or converter box is converting the signal.)

Jun 13, 2009 | Polaroid TTM-2401 TV

1 Answer

My rca tv 20f424t doesn.'t show thw correct


That is the Digital range of channels, since it is digital you will not need a converter box for this model. Their is also an Analog range of channels which is the primary setting, You will need the factory remote to switch from Analog to Digital... Without that remote you might have a problem their isnt a way to switch within the menu settings, good luck!!!

May 11, 2009 | RCA Standard (CRT) Televisions

2 Answers

VCR HOOKUP PROBLEM


you will need to hook your signal to the converter box then into your vcr and then into your TV. Now if your vcr has signal out then you will not have any problems hooking your tv up to the vcr. You may have to use the audio out to get the right sound with your tv.

Feb 10, 2009 | Hitachi Standard (CRT) Televisions

1 Answer

Does my tv have a digital tuner (RCA Model E13320, 2/2001)?


The digital tuner has nothing to do with the new signal you will be receiving in February of next year. The new video signal is a digital signal. The old video signal is analog. Your television receives the analog signal and converts it to what you see on television. You need a converter box to convert the new digital signal back to an analog signal your television can convert.

Jerry

Nov 07, 2008 | Standard (CRT) Televisions

1 Answer

KD-36FS130 Digital Set-Up?


I did not know that the Sony FS series has digital capability. This is supposed to be the most basic model of CRT flat screen TV that Sony made.

You can get a digital cable or satellite box that outputs analog baseband or component analog video and analog audio. You can then connect this box in to the TV set. The TV will then display the analog signal from the digital box.

If your cable or sat box is able to tune in standard channels, but cannot tune in the ones that are on digital service, then the fault is with the box, or the cable or sat system. This you should address to the TV service provider.

Jerry G.

Apr 19, 2008 | Sony FD Trinitron WEGA KD-36FS130 36" TV

Not finding what you are looking for?
RCA 24V510T 24" TV Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...