Question about Garden
If purchased at Einhell (you can also down load an IPL)
Spear and Jackson UK
Look carefully there is a phone number for Argos
If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Thank You for using FixYa.
Posted on Jul 06, 2010
See if they have a web site which shows dealers with spares
Posted on Jul 05, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
12. Ordering replacement parts
Please quote the following data when ordering replacement parts:
_ Type of machine
_ Article number of the machine
_ Identification number of the machine
_ Replacement part number of the part required
For our latest prices and information please go to
UK: 0151 649 1500
IRE: 189 094 6244
Posted on Sep 24, 2009
Remove the spark plug and test for blue, snappy spark. If nothing, try a new plug set for 0.020" gap. If still nothing, remove the cover from the flywheel side to expose the ignition module. Remove the ignition switch wire from the module and try for spark again--if ok, check for a grounded ignition switch or the wire itself. If still nothing, replace the ignition module. Use a thin business card for a pole gap between the module and the flywheel magnets. Allow the module poles to contact the magnets, then tighten the screws. Rotate the flywheel to remove the card. If you got spark in the first test, then place some fuel mix in the plug hole and try to start. You should get several pops. If ok, then work on the fuel system. Check the fuel filter, air cleaner, and muffler for plugging. Check the fuel lines for decay or other damage. Make sure the carburetor fasteners are tight. If the machine is fairly old, you should check the condition of the lower chamber diaphragm in the carburetor--it may have become hard or cracked. Hope some of this helps!
Posted on Jul 01, 2010
Tips for a great answer:
Nov 01, 2013 | Garden
Jan 22, 2013 | Garden
Jun 04, 2011 | Garden
Jul 15, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp
Jun 30, 2010 | Garden
Feb 25, 2010 | Husqvarna Chain Saw 20" Bar
Nov 22, 2009 | Garden
Aug 30, 2009 | Garden
Apr 21, 2009 | Husqvarna Chain Saw 20" Bar
384 people viewed this question
Usually answered in minutes!