Question about HP LaserJet 3330 All-In-One Printer

1 Answer

How to fax from glass on laserjet 3330

I need to know how to fax from the glass on the hp 3330 laserjet,I know it does it somehow I used it before but now my feeder isn't working and I need to fax something. Please Help! Thanks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Use the alphanumeric buttons on the device control panel to dial the number.
If the fax number you are calling has been assigned to a one-touch key, press that key.
If the fax number you are calling has a speed-dial entry, press phone book, use the
alphanumeric buttons to enter the speed-dial entry, and then press menu/enter.
Note When dialing by using the alphanumeric buttons, include any pauses or additional numbers
that are necessary for the call, such as an area code, an access code for numbers that are
outside of a PBX system (usually a 9), or a long-distance prefix.
2. Load the document onto the flatbed scanner face down.
select YES when Send from glass? 1=Yes 2=No
appears, and then press menu/enter..
If this fixes your problem please rate this as fixed. If it didn't,please don't rate and add a comment and I'll be glad to help you further. Thanks.

Posted on Apr 18, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Problems with hp laserjet 3330

suspect either worn ADF(automatic document feeder) pickup roller or there is a jam in the ADF unit where the paper feeds to the scanner.

Mar 11, 2010 | HP LaserJet 3330 All-In-One Printer

1 Answer

When sending a fax, do i face the front side of my document face down or the back side down?

If you are faxing using the feeder , the front page will face up. and if it is on glass/scanner will be faced down.

Thanks for joining us, for more assistance please stay connected with Fixya.

Have a nice day.

Mar 08, 2010 | HP LaserJet 3330 All-In-One Printer

1 Answer

I have an hp laserjet 3330 copy/fax machine and it keeps saying power off, power on, power off, power on...It doesn't seem to have a power switch but I've unplugged it and plugged in back in but the...

The scanner is either worn out or just dirty. If you can remove the top glass you can gently wipe the mirrors and lenses with a Q-tip and clean the white strip on the underside of the glass. If that doesn't help the lamp is just worn out not putting out enough light. Parts are not available for that so it could be time for a new machine.

Jan 28, 2010 | HP LaserJet 3330 All-In-One Printer

2 Answers

I have a HP LaserJet 3330 copier/printer.When I use the document feeder on top I get a black line. When I put it on the glass, no black line. Help!

You may have some thing like a small piece of paper or some other obstruction in your document feeder mechanism that is blocking the light to the document or ostructing the view to the image sensor. Carefully clean that feeder and rolls perhaps by blowing.

Jan 18, 2010 | HP LaserJet 3330 All-In-One Printer

1 Answer

Describe your hp laserjet 3330 ?

The problem may be in the machine you're sending to, if you get a copy thru the adf or on the glass with no lines, it's the same image you would send thru fax. Check the narrow glass though, I usually find white out on that glass and have to clean it off.

Aug 11, 2009 | HP LaserJet 3330 All-In-One Printer

2 Answers

The hp laserjet 3330 diverts to fax too quickly


What you need to do is on the printer, hit the menu/enter button, then scroll through until you see "Fax Setup" click enter, then scroll until you see "fax receive setup", click enter, then scroll until you see "rings to answer". Here can you set it to a higher number of rings, just remember to click enter once you've got the number set to where you want it.

Jul 09, 2009 | HP LaserJet 3330 All-In-One Printer

1 Answer

HP Laserjet 3330 printed dark page especially around the middle

Does this happen both when copying and printing?
For printing solution, try another toner cartridge.
If lines continue to appear when copying (primarily through the automatic feeder) then lift the auto feeder, and clean the glass -mainly the narrow piece on the left side.

please rate solution :)

Apr 07, 2009 | HP LaserJet 3330 All-In-One Printer

1 Answer

Hp 3330 line prints on document when faxing or copying

does this problem appear when you copy from ADF? if yes check the rollers, perhaps something stuck on them.otherwise try to clean the glass

May 04, 2008 | HP LaserJet 3330 All-In-One Printer

Not finding what you are looking for?
HP LaserJet 3330 All-In-One Printer Logo

737 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides