Question about Saeco Stratos Coffee Maker, Espresso Machine

1 Answer

Type: sup 015 st no water passes during rinse or

Type: sup 015 st no water passes during rinse or when making coffee

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

First, check / remove the water filter in the tank, next try to run hot water thru the wand, not steam but water, this should prime the system, then turn off and back on, that should do the trick, unless you have a bad pump. Good Luck!

Posted on Oct 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an older model cuisinart 12 cup coffee maker. This am the water will only slow drip through the filter. There is lots of gurgling but not much coffee. Can u help me figure out what's wrong?


Calcium buildup. Follow your coffee maker's manual cleaning procedures to dissolve the hardness buildup.

If you can't find your manual, try mixing 1-2 cup of white vinegar in an 8-oz to 12-oz pot of water and pour it into the water receptor. Run the coffee maker until about 1/2 the water has passed through the machine then turn it off and let it stand for awhile (say an hour). Then turn it back on and let it finish. This should dissolve the hardness buildup in the machine and restore the flow. If not repeat. If you use a paper filter during the process, you should capture all sorts of hardness particles.

After it's flowing good again, run with one or two pots of water to rinse.

Oct 23, 2016 | Cuisinart Coffee Makers & Espresso...

1 Answer

Fagor cr-22 is not working and showing 3 flashing lights alternatively left and right? what is the problem


you should always use just about one tablespoon of white vinegar added to a potful of cold water, poured into your coffee maker, followed by one full pot of plain cold water to rinse thoroughly.....I think using at least 2-3 full pots of cold water to rinse should fix the problem. Of course you realize you have to have the pot on each time you pass water through it, as if you were making coffee. I think calcium cleaaners are too harsh otherwise. destinie1106@gmail.com

Feb 18, 2012 | Fagor Coffee Makers & Espresso Machines

2 Answers

Cleaned the Cuisinart with vinegar yesterday, rinsed through with water. Now it makes a lot of noise and takes a VERY LONG TIME to perk, and the result is too strong and doesn't make the expected number...


I had the same problem. We had stopped using the little charcoal filter and as a result got coffee into the intake. It was partially blocked. The result was lots of steam, but no water coming out the tube. After repeated power rinsing and a little compressed air down the out flow tube it is all working again.

Feb 11, 2010 | Cuisinart CBC-00FR 12-Cup Coffee Maker

1 Answer

Coffee maker shuts off during brew


Unplug for 20 minutes or longer, then:
Cuisinart Coffeemaker Decalcification Process

Run 2 cups distilled white vinegar and 2 cups water through the system - brew it like it was regular coffee. Then run plain water through the coffemaker to rinse the vinegar out and make sure the decalcification was successful. Repeat as needed. Don't forget to remove the charcoal water filters first.

-Tha Mp3 Doctor

Aug 27, 2008 | Cuisinart Grind and Brew 10 Cup Coffee...

1 Answer

Saeco coffee espresso machine Type SUP 018M At the beginning, the amount of water, was lower than what it should be. I had to set the machine on the large cup side, to get the amount of water for an...


Hi,

Make sure you not get any water in the grinder. If you not get any water in the grinder then it can be the micro switch that has to be replaced.

You can program the button for how much coffee you will have, press and hold the button, when you reach the level you want then release the button.

let me know if you get your machine to work.
Have a nice day
/Mirran

Aug 13, 2008 | Saeco Incanto Classic Espresso Machine

1 Answer

Saeco Incanto not grinding


Hi Chris,

The leaking is your steam valve that has to be replaced, you can see this if you open the door and look up in the right corner there you will see water drip.

If not then you have a pipe or boiler leak.

How old is your machine?
How often do you descale the machine?

When you try to make a cup of coffee, starts the grinder for two seconds or is it dead?

Hope this will help you.

Jul 19, 2008 | Coffee Makers & Espresso Machines

1 Answer

Saeco incanto sup 021yr


did you ever descaled the machine not with vinegar but with real descaler normally that does the trick 1 part water 1 part descaler not vinegar put it in water cointainer start machine open side valve for a few second close it leave it in there for 15 minute repeat untill empty rinse very good with clean water that stuff is very corrosif cheers

Jan 23, 2008 | Saeco Incanto Classic Espresso Machine

Not finding what you are looking for?
Saeco Stratos Coffee Maker, Espresso Machine Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

espressofixr

Level 1 Expert

16 Answers

83bj60

Level 1 Expert

22 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...