Question about Linksys Wireless-G WRT54G Router

1 Answer

I keep losing network connection. The amount of time that would pass before losing connection varies from 30 minutes to a few hours. I originally thought it was caused by a virus on my computer but once the computer was cleaned up, I continued to have the problem. I confirmed that the router was the issue when I connected my computer directly to the modem and the problem went away. Is this fixable or do I just need to get a new router (Linksys wireless-G WRT54G)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Try to update the firmware but I have found that there was a batch of these routers that had some issues, in which case its easier and cost effective to just replace the router. Dont get me wrong when linksys works it is a great router for the price.

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Juicy Couture watch keeps losing get time about 30 minutes just bought it 2 weeks ago


Take it to a local jeweller and ask them to calibrate it which is done electronically. Fakes are renown for losing or gaining massive amounts of time.

Dec 29, 2016 | Juicy Couture Watches

1 Answer

My edimax br 6428ns keep on losing its internet connection...i have an internat connection around 30 min but it will stop and i need to run the setup again in order for it to work..


Check the connection type is not "Connect on Demand".
Check the Idle Time Out setting is not used.

This specifies the amount of time the router waits before shutting down an idle connection. This option is only available when "Connect on Demand" is selected. See the manual
See



http://www.edimax.co.uk/edimax/download/download/data/edimax/uk/download/for_home/home_legacy_products/home_legacy_wireless_routers/br-6428ns

Feb 07, 2013 | Edimax Network Br-6428ns Wireless N 300m...

1 Answer

Just tried turning i phone on after a couple of months of not using it but no joy. Doesnt even register its charging. Help


Hello teresadonach!

Your iPhone is probably fine! When a device using a battery isn't used for an extended period of time, the battery still loses its charge. More than likely, the battery is completely drained and will require you to have it plugged in for 15 to 30 minutes before even getting a charge indication. The time varies depending on device.

Keep it plugged in for about 2 hours and check back! As long as it was working fine when you stopped using it, it should power on!

Please remember to rate if this was helpful!

Mar 18, 2011 | Apple iPhone Smartphone

1 Answer

We all have this problem with this camera


do a site survey for your setup to see which channel is best for your location. Keeping in mind that wireless networks become more popular, the channel that was best then may not be best now. so you may want to do site survey and channel selection when you have problem communicating between devices.
alway upgrade your cordless phone to dec 6.0 type.

Aug 29, 2009 | Linksys Wireless-G WVC54GC Network Camera

1 Answer

Screen goes pink and green starting with a few pixels


Best thing to do, try a different known working monitor to hook up to the computer. If the screen works and doesn't change colors then you know its the original monitor that is bad.

If you hook up the known working monitor and the same problem happens then you know its the video card that is bad and the video card would have to be replaced.

Aug 23, 2009 | ASUS VW222U Monitor

1 Answer

Have sound, lose picture. D52W23


sounds like a solder issue. try resoldering the Ics that are attached to heat sinks on the Board that has the flyback also resolder the flyback pin connections

Jun 18, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Lamp Replacement


some projectors have a shut down timer. if it not being used for a specified amount of time, it'll go into a "sleep" mode to save the lamp. but the projector was designed for continual use. if the lamp get too hot, say after 12 hours, it'll go into thermal shutdown to cool off. turning it off when not in use saves the lamp a few hours or minute, but it's not necessary. just like keeping your car idle while you're in the house is ok, but it wastes gas and is not necessary.

Oct 18, 2007 | Eiki USHIO PROJECTOR LAMP, Projector Lamp...

1 Answer

Network problem


first thing it could be a virus problem, if u have already scanned ur handset than check the antena connectivity with the chip or the antena itself has gone bad.

Sep 22, 2007 | Nokia 6233 Cellular Phone

1 Answer

Phone loses connection after few minutes


I looked up the battery specs for your phone. They are 3 X 200mah= 600mah battery packs. They should last 8 hrs talk time with the headsets. This style of battery pack in my experience only last about 1 1/2years and sometimes longer and "sometimes" shorter...much shorter. I bet you never had problems when you first got them. Basicly this "battery design arrangment" goes back many years before newer battery technlogy was developed. But designers still insist on using them even today. They are cheap to make. ****Time to replace them with new ones.**** Make sure you follow the mfgs charging instructions: "After battery installation, place the handsets in their base unit or charger and allow to charge for 16 hours before use. You can keep the battery charged by returning the handsets to their base unit or charger after each use. When the battery is fully depleted, a recharge takes about 12 hours. Average talk time on a fully charged battery is about eight hours depending on environmental conditions, standby time is approximately four days." Good luck

Jul 19, 2007 | AT&T E5640 Phone

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...