Question about Mitsubishi VS-55609 55" Rear Projection Television

1 Answer

Basically i have an older rear projection model mitsubishi not sure of the model #, it is currently having lines run from top to bottom like waves on the picture screen! is there anything you can tell me about this problem?

Posted by on

  • amcdonald111 Jul 09, 2010

    The model # is VS-5043
    AC120V 60HZ 210W
    Mitsubishi Electronic America Inc...


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

Many different mitsubishi's have problems with voltage regulators going out and causing wavy diagonal lines that scroll the picture from top to bottom or vice versa. Without a model number it's difficult to clarify.

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

10 yo mitsubishi big screen rear projection has blue lines rainbow shape top to bottom in the middle the rest of the screen is tinted and dark


A little more information would be helpful but take a look at some photos and see if they look ANYTHING LIKE your problem,

If they do you have a convergence problem and an exact model number would allow me to assist here more.


Steve11_2_2011_9_44_08_pm.jpg11_2_2011_9_44_32_pm.jpg11_2_2011_9_45_15_pm.jpg

Nov 02, 2011 | Mitsubishi Televison & Video

1 Answer

What type of power inverter should I use with this model.


You MUST use a SINE WAVE Inverter ONLY. Anything else will quickly "Kill" your unit. Also get at least a1 Killowatt inverter, so you have lots of "Headroom" in supplying current, and the inverter runs way below it's capacity, this ensure a clean waveform and constant voltage.
Also NEVER EVER plug any sort of Motorized equipment into it ever! especially when the TV is plugged in.

Aug 09, 2010 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

I have a Mitsubishi ws 55909 and all of a sudden the convergence will not line up. The red lines have a wave pattern that will not reset. Any ideas?


You will need to replace the convergence amplifer chips and any related blown resistors, and perhaps two fuses.
Search this site for convergence fixes.

Sep 08, 2009 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Colors lines are bad.


you need new convergenc chips, this is the most common failure in all rear projection crt tv's. the part numer is either stk 392-570, or stk 393-110, the tv needs to be taken apart and the chips have to be soldered in, a qualified tv repairman could do it, but a consumer could not, and would probably damage the set trying.

Sep 07, 2009 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Mitsubishi WX-65907 picture with sin waves


In the past I have replaced the filter caps in the power supply and it has solved this issue in other similar models in the Australian consumer market. If your keen to open the unit up and examine the electrolytic capacitors they ones that bulge on the top and somtimes leak are faulty. The picture below is a classic example of this:
http://www.mactec.com.au/wp-content/uploads/2009/03/g5_psu.jpg

May 07, 2009 | Mitsubishi WS-65907 65" Rear Projection...

1 Answer

Mitsubishi VS-4561 picture curved inward


Its Your Convergence Chips!. And Maybe a few Resisters!. Common Problem with this kind Of Set!.....

Jun 30, 2008 | Mitsubishi VS-45607 45" Rear Projection...

1 Answer

Horizontal Lines On Screen


horizontal lines = horizontal sync off . mitsbishi always seemed to have this problem .. on the older sets I would take the back off and inside deep on the board i would adjust a pot and sync it right .... and never had a recall, maybe your newer model has this too .. this little control,

but its a horizontal sync problem.

if no change the horizontal processing ic.

Jan 11, 2008 | Mitsubishi WD-52725 52". Rear Projection...

Not finding what you are looking for?

Open Questions:

See all Mitsubishi VS-55609 55" Rear Projection Television Questions

Mitsubishi VS-55609 55" Rear Projection Television Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1208 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...