Question about VeriFone VX510

1 Answer

Vx 510 connected to lynksys router by ethernet cable. Cannot get a ip address for it and connect to finish sales

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

I have similar units and sometimes you have to power them down, wait 2 minutes, and power back up. Make sure router is up and running when you do this. Also is your router setup to give out IP addresses, meaning do other computers or devices receive IP's? If not I can help you do this. The other thought I had is the machine may not be setup to work through internet but just a phone line. In that case you would have to call your Processor & they could help you to change the settings on the machine. Be aware some processors do not have the ability to do transactions over the internet, but again check with them.

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, i have a problem in lynksis WRH54G. I have changed my network service provider a few days ago, starting that day i couldn't use my lynksis wireless router anymore. it looks like it's working properly...


You need to reconfigure your WAN settings of router to your new internet service provider settings.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router.
Click on WAN settings in general setup and set as your service provider settings.If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Jan 05, 2011 | Linksys WRH54G Wireless Router

1 Answer

I erased my Network Key and now I can't access the internet wirelessly. I don't know the password. How can I reset it. I can only connect with the Ethernet cord plugged in. It's a WRT400N, Cisco lynksys...


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Dec 27, 2010 | Linksys WRT400N Router

1 Answer

My linksys w/2phone ports cannot hook up with the ethernet


Most Cable Internet Service Providers (ISPs) use Media Access Control (MAC) Address authentication to establish Internet connection for end-users. MAC address is a unique identifier assigned to the network adapter/s of the computer.
To set up your Linksys router to work with a Cable ISP, you have to enable the MAC Clone feature of the router. MAC Cloning is a procedure which enables a router to copy the MAC address of the computer registered with the ISP.
To set up a Linksys router with Cable connection, you need to perform four steps using the computer that's been registered with the ISP:
i. Verifying Internet Connection
ii. Connecting the Devices Together
iii. Checking the Router's LEDs
iv. Setting Up a Linksys Router for Cable Internet Connection

Verifying Internet Connection
Connect the computer to the Broadband modem using an Ethernet cable without the router installed. If you cannot get online, contact your ISP. If it's online, use the computer to set up the router.
NOTE: Some cable modems use the USB port. If the physical connection is via USB port, you may not be able to go online via Ethernet connection. Contact your ISP to have the Ethernet port of the modem configured.

kb17251-001_en.png NOTE: The image may vary depending on the computer and modem you're using.
Connecting the Devices Together
After confirming the Internet connection through the modem, connect the modem to the Internet port of the router; connect the computer to any of the four Ethernet ports at the back of the router. For instructions, click here.
Checking the Router's LEDs
After connecting the devices together, check the lights on the front panel of the router. Ensure that the Internet light, as well as numbered light corresponding to the Ethernet port where the computer is connected, is lit. For further instructions, click here.
Setting Up a Linksys Router for Cable Internet Connection

Step 1:
Access the router's web-based setup page. For instructions, click here.

NOTE: If you are using a Mac computer to access the router's web-based setup page, click here.

Step 2:
On the Setup tab, click the MAC Address Clone sub-tab.

kb17251-002_en.png

Step 3:
Select Enabled then click Clone My PC's MAC.

kb17251-003_en.png

Step 4:
Click Save Settings.

Step 5:
Click the Status tab.

kb17251-004_en.png

Step 6:
Check the Internet IP Address. If the Internet IP Address has numbers, this means the router has been properly configured. You should now be able to access the Internet. If you're still unable to access the Internet, powercycle the modem, the router and then restart the computer.

kb17251-005_en.png

NOTE: If the IP address is still 0.0.0.0, click IP Address Release then, click IP Address Renew. If this does not change the IP Address, powercycle the modem, the router and then restart the computer.

Nov 14, 2010 | Linksys WRT54GX2 Wireless-G Broadband...

2 Answers

Forgot password for reinstalling router model #wrt54G


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless settings then wireless security then enable WEP security and enter WEP key it is your password to connect wifi.Then save settings and restart router . Then when anybody try to connect your wifi it ask for that password. Let me know if you need further assistance. Thanks for using FixYa.

Aug 28, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

My Lynksys WRT54G has suddenly switched my wireless connection to a generic unsecured connection and away from my own setup. How do I fix this?


Please Enter the ip address of the router in internet explorer and go to wireless security. In that window we can change the the security and can give security pin.

Aug 05, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I have a new Macbook pro and when I attempt to set up a network I get a message that the connection is "timed out" I cannot seem to establish a network with either DLink or Lynksis Any suggestions?


Hi! Absolutely, the Router is OS independent. All you need is a computer with a properly configured Ethernet LAN adapter and a web browser to configure the Router. Any platform that supports Ethernet & TCP/IP is compatible with the router. You may need to provide additional hardware & software (i.e. Ethernet cards and/or software drivers) to ensure that all clients operate with the router.

By default of your mac computer it has already a buil-in LAN port same as other pc and it should be properly configured. just connect the cable from the mac lan port and the other end goes to your port 1 to 4 of the linksys or dlink router and it should give you an internet connection. if there is no internet access, pls check the ff:
1. Go to system preferences, network
2. It will pop up the network window
3. location set it to automatic
4. show - set it to built in ethernet
5. once you set it to built in on the lower portion it should set to tcp/ip and the ip address should show, once there is an ip address, you should get an internet connection, sabe or apply the settings
6. you are going to do the same thing if you are going to set the pc on a wireless connection.

if you have any querry pls feel to get in touch..

Aug 16, 2009 | D-Link DIR-625 (790069292637) Wireless...

3 Answers

Can not connect to wirless Dell 1525


Does it have awirless card or just an ethernet cable card?

Jul 28, 2009 | Dell Inspiron 1525 Notebook

1 Answer

Problem with Lynksys WRT54-G


This is a common problem with the Linksys wireless router. You will need to reset your ISP device, meaning the ADSL router, or Cable modem, reset the Linksys device, and reboot your computer in that order.

Next you "should" release the IP address of your computer once it reboots to Windows (assumed). To do this you click on RUN, type in CMD to get a DOS window. From that window type in "ipconfig /release" without the quotes. Then close the window. Reboot the comptuer again.

You will NEXT need to determine which device is acting as the DHCP server, the ISP device or the Linksys device. To do this you will need to open up the CMD window again but type in "ipconfig /all" without the quotes. If your ISP device is listed first, then it is likely the server for all available IP adress on your local network. This means that the Linksys has been assigned a new IP address. The Linksys must be the DHCP server in this case so that it may be accessed through 192.168.1.1 from your browser address.

To make the Linksys the DHCP server, you must connect your ISP device to the Ethernet uplink port on the back of the Linksys router. The Linksys router may then be connected to a Ethernet hub or act as your hub if you have no other.

I hope this shines some light on the problem.

Dec 29, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

Samsung CLP-510 not printing


hi ,
i went through the website www.linksys.com and i found that Samsung CLP-510 is not compatible with wrt160n.

Oct 23, 2008 | Computers & Internet

1 Answer

Help connecting Cable Internet through D-Link DI-514 Router


what may be happening is the wireless pc as it was; needs the dns and ip address flushing, also the pc you connected the router to as you must have conflicting ip addreses Click start run then type ipconfig /flushdns. You should ensure that the router is set to enable DHCP to assign ip addreses and make sure your'e network cards on all pc's are set to obtain ip address automaticaly in the TCP/IP properties. Restart the pcs and type 192.168.0.1 in your web browser and get into your router setings and check in the DHCP section that all pc's have been given an ip address. If all fails you may need to reset the router

Sep 03, 2007 | D-Link DI 514 Wireless Router (DI-514)

Not finding what you are looking for?
VeriFone VX510 Logo

1,200 people viewed this question

Ask a Question

Usually answered in minutes!

Top VeriFone Retail Supplies Experts

danielle yancer
danielle yancer

Level 2 Expert

87 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a VeriFone Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...